FED 2 v1 Manual de Usario

FED No categorizado 2 v1

Lee a continuación 📖 el manual en español para FED 2 v1 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

FED-2 Instruction manual

– – 1

FED 2

Fed-2 35mm FILM CAMERA instruction manual

This text is NOT identical to the one in the ocial Instruction Manual.

Fed-2 frontal View

01. Film Counter

02. Film wind knob

03. Rangender optic

04. Aperture index dot

05. Scale setting ring

06. Viewnder aperture

07. Automatic releaser button

08. Automatic releaser lever

09. Synchronizer socket

10. Front lens nut

11. Aperture setting ring

12. Depth of eld scale

13. Focusing ring

This manual contains a brief description of camera Fed-2 and the basic rules

for using the camera. It

cannot serve as a photography manual.

Slight dierences between the description and the camera may occur as a

result of technical

modication being introduced in the design of the camera.

Camera Fed-2 operated on standard 35 mm lm with a picture size of

24×36 mm. The great

resolving power of the lens makes it possible to

obtain perfect large-size pictures. The wide range of

shutter speeds,

the trigger winder, synchronizer, automatic releaser, dioptric view-nder setting, the

light weight and compactness of the camera will

satisfy the requirements of either amateur or

professional

photographer. The camera is tted with lens Industar-26M or with

Industar-61 with

lanthanum Optics. The camera is so designed that it

is also possible to use interchangeable lenses

Industar-50, Jupiter-9, Jupiter-11, Jupiter-12 and others. In taking a picture the camera

is focused with

the help of the range-nder. The automatic releaser

incorporated in the camera allows

FED-2 Instruction manual

– – 2

the photographer to take pictures

of himself. The automatic shutter speed ranging from 1/500 to

1/25

(1/30) sec permits the photographer to use the camera under any

lighting conditions. At the bottom of

the camera there is a socket

for a tripod. It is possible to photograph with a tripod without

taking the

camera out of its case.

Fed-2 rear View

14. Dioptric correction level

15. Rewind knob

16. Shutter speed selection knob

17. Shutter speed scale

18. Rewind release ring

19. Shutter release button

20. Frame counter disc

21. GOST lm speed reminder

22. Range and viewnder eyepiece

23. Accsessory shoe

24. Base locking latch.

FED-2 Instruction manual

– – 3

The camera can be loaded under ordinary soft lighting conditions in the

following way. By turning

the nut on the case bottom unscrew the tripod screw

retaining the camera, remove the camera from the

case. Raise the lock shackles

with the nail and turn them half-way round as far as they will go. Then

pressing with the thumbs, shift the camera back in such a way that its edge

comes out of the camera

slot and remove it.

Open the camera and take out the take-up reel and magazine. The reel is removed

with a certain

amount of eort. Load the magazine with lm (the magazine is

loaded in the darkness). Having pulled

out a free end of lm about 10cm long

from the magazine, fasten it on the reel in such a way that the

spring tooth

enters one of the perforations.

Fit the take-up reel on the bush and then place the magazine in the camera. At

this point the lm

should be slightly stretched and the teeth of the sprocket

should enter the perforations of the lm.

Close the camera.

The unexposed lm is fed to the picture aperture by winding the shutter twice

pressing the release

button after each winding. The winding lever should be

turned as far as it will go.

When properly loaded the camera is wound easily without jerky motions and

noticeable eorts.

Then by turning the dial scale set the O point of the“ ”

picture counter opposite the indicator. Align the

sensitivity scale dial with

the lm-type indicator index in accordance with the data of the lm loaded in

the camera. The lm indicator is a memory device consisting of a movable

sensitivity scale in lm

speed units (ASA, DIN) and a stationary indicator

with conventional designations of lm types.

The camera is equipped with lens Industar-26M or Industar-61“ ” “ ” with lanthanum

optics. The

scales are located on the lens mount. The diaphragm scale 1

indicates changes in the lens speed. When

focusing, the depth-of-eld scale 2

indicates on the distance scale the limits within which the range

sharpness

will be satisfactory for each selected diaphragm value. The distance scale serves for 3

focusing the lens. The scale designations correspond to the distance

from the object being

photographed to the surface of the lm in meters.

The camera is focused with the help of optical range-nder. In order to set

the camera at an accurate

and proper focus turn the lever of the dioptric

focusing, focus the view-nder by sight (the dioptric

focusing mechanism

provides a correction of ± diopters).

Especificaciones del producto

Marca:	FED
Categoría:	No categorizado
Modelo:	2 v1
Colocación del dispositivo:	Ingebouwd
Tipo de operación:	Draaiknop
Color del producto:	Zwart
Pantalla incorporada:	Nee
Ancho:	595 mm
Profundidad:	545 mm
Altura:	595 mm
Parrilla:	Ja
Iluminación interior:	Ja
Cocinar por convección:	Ja
Capacidad interior total (hornos):	50 l
Número de hornos:	1
Fácil de limpiar:	Ja
Ancho del compartimento de instalación:	560 mm
Profundidad del compartimento de instalación:	570 mm
Altura del compartimento de instalación:	585 mm
Puerta del horno extraíble:	Ja
Consumo de energía (convencional):	- kWu
Consumo de energía (convección forzada):	- kWu
Tamaño del horno:	Middelmaat
tipo de horno:	Aardgas
Potencia total del horno:	- W
Horno de capacidad neta:	50 l
puerta del refrigerador:	Ja