FeiYu-Tech G4 Plus Manual de Usario

FeiYu-Tech No categorizado G4 Plus

Lee a continuación 📖 el manual en español para FeiYu-Tech G4 Plus (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Function Button Operation Instructions

Remove the power

switch cap, insert two

batteries into the handle.

Insert The Batteries

Install the Smart phone

by the quick-release

adapter. And make

sure it is fixed well.

Install The Smartphone

Indicator

Tilting Axis

Panning Axis

Power Switch

Rolling Axis

Function Button

Use for switching working modes.

Function Button

Identify the working mode

via switch to different status

of the indicator light.

Upgrade........

Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the latest

firmware then unzip the RAR file.Remove the batteries and refer to the connection diagram to connect the gimbal with the computer.

Please refer to the manual of update operation to upgrading,otherwise the Gimbal will be abnormal.

The Gimbal attitude can be calibrate through parameter setting software. User can adjust the pitch and roll in a small angle to achieve more

accuracy filming scene. Please insert the batteries then refer to the connection diagram to connect the gimbal with the computer for caliration

Firmware Upgrade Instruction

Gimbal Calibration

Function Interface

USB Cable USB Connector

Attention : Please be sure to connect the computer with the USB connector.

Attention: Be sure to connect the computer with the USB connector

When the red LED indicator light flashes

in use, it means the gimbal is out-of-order

Indicator Explanation

LED Status Explain

Blue light flashes

three times Full Power

Blue light flashes

twice Enough Power

Blue light flashes

once Low Power

Blue light keeps

flashing No Power

Product Overview

Operating

3Optional Accessories

Charger Rechargeable

Battery

Input: DC 5V

Output: DC 4.2V Type: 18350 Weight: 6 gWeight: 52 g

USB Connector

Heavy

Counter Weight

Light

Counter Weight

Use Heavy Counter Weight

Use Light Counter Weight

Version 1.0

G4 Plus 3-Axis Handheld Gimbal for Smartphone

5Firmware Upgrade And Other Settings

Please

Remove The

Batteries Before

Upgrading

1User Guide (1) Please install the suitable smartphone first before power on the gimbal.

(2) Please turn off the power when not in use.

Attention !

G4 Plus compatible with iPhone 6s Plus/ 6s / 6 Plus / 6 / 5s / 5c / 5 / 4s /4

and other smartphones with similar dimensions

Adjust The Center of Gravity

If the smart phone inclines towards

the tilting axis, pull it towards the left

to be in place, and let the center of

gravity keep balance or slightly incline

to the smart phone. If the smart phone

still inclines towards the pitch axis,

install the clump weight.

Standard Installation Method

Tilting

Axis

Power On/Off

Check whether the phone is installed

well, and long press the function

button for two seconds to turn on

the gimbal. Long press the function

button for three seconds to turn off

the gimbal.

Choose The Suitable Counter Weight

If the smartphone still leans to the

tilting axis direction, after adjust

the center of gravity, please replace

the counter weight cover with the

counter weight module. Please refer

to the left showing photo. Try to keep

the center of gravity balance after

mounting the counter weight module.

Tilting

Axis

Function Interface

USB Cable

Basic Working Modes

Panning Mode The smart phone is allowed to pan left or right.

Vertical tilts or rolls are restricted.

Panning and

Tilting Mode

The smart phone is allowed to pan left or right

and tilt up and down. Rolls are restricted.

Other Functions

Special Working Condion （）Inversion Mode

Under any working mode, consecutively press the function button for three times, the gimbal

enters into the inversion mode and automatically switches to the Panning mode. Invert the gimbal, put the camera face down, and combine with

the three working modes of handheld gimbal to capture the wonderful moments. The gimbal can restore to the boot-up state by consecutively

pressing the function button for three times under inversion mode.

Manual Pulling Locking

After the gimbal has been powered on for eight seconds, the tilt angle can be adjusted manually in the panning

mode and lock mode. Adjust the tilt angle to the desired position and wait for 0.5 second until the gimbal registers the new angle.

Reset

Consecutively press the function button for four times to restore to the boot-up state.

The smart phone stays in its current orientation.

All panning, tilting and rolls are restricted.

Lock Mode

LED Status

Double tap

Single tap

Single Flashes /

On Constantly

Double Flashes

Function

Panning Mode /

Lock Mode*

Panning and Tilting Mode

Triple tap Single Flashes Inversion Mode

Quadruple tap

Single Flashes

【 Lock Mode 】 Under any working mode, single tap the function button, the indicator LED is always on, the Gimbal can be

enter the 【 Lock Mode 】. During the LOCK MODE other operation is arbitrary.

Operation

Single Flashes

Standby

Long Press For 3 Second

Can switch in other mode, or trip again to exit and reset

Under panning and tilting mode, single tap to switch to lock mode

Single tap to switch between panning mode and lock mode.

Single tap again to activate

Reset the tilting axis of the gimbal to initial orientation and initial mode

Reset

Remark

9 mm

iPhone 5

iPhone 4

0 mm

iPhone 6

iPhone 6s

0 mm

iPhone 6 Plus

Light Light Heavy

iPhone 6s / 6 Installation iPhone 5s / 5C / 5 / 4s / 4

Installation

iPhone 6s Plus / 6 Plus

Installation

* *

FY G4 Plus 3-Axis Handhled Gimbal for smartphone is an excellent

stabilizer, yet lightweight and portable.

DISCLAIMER ATTENTION

Please visit the official website of Feiyu Tech

to get related information: www.feiyu-tech.com

Technical support: service@feiyu-tech.com

Please assemble the gimbal in accordance to the diagram provided .

Please upgrade the firmware and configuration settings with the

provided USB data cable.

Please charge the battery with the provided battery charger.

Please install the camera securely before powering on the gimbal.

When the gimbal is not in use or placed on the table, please

ensure it is powered off.

Prohibit any user for any illegal purpose. Users will be responsible for

all behaviors of purchase and use products.

The Company assumes no liability for any risks related to or resulting

from the debug and use of this product (including the direct, indirect or

third-party losses).

For any unknown sources of using, we will not be at any services.

Feiyu Tech reserves the right to amend this manual and the terms and

conditions of use the gimbal at any time.

Everyone

Can Make a Movie

Keep the gimbal powered on, restart the remote control

and connect the receiver of RC to the gimbal, press the remote control

function button for 7 times in 5 seconds, if the indicator on the RC flashes

5 times it means the receiver and the transmitter of RC match

successfully, then customer can control the gimbal by the RC.

▲ RC needs to be match code whenever the following situations：

（1）Connecting properly but still control in fail.

（2）Change the receiver or wireless remote control.

Match Code

Wireless

remote control

Receiver

for wireless

remote control

Steps to connect wireless remote control:

Joystick

Wireless Remote Control

7Remote Control (Optional)

USB Cable

Power

Function

Interface

Function

Interface

OFF

Function

Button

Operation

Long press for 0.5 second

Long press for 3 second

after single tap

Long-distance mode switch of gimbal and manual control of angle can be realized

by remote control

Up Left RightDown

Wired Remote Control

Install the receiver for wireless remote control: Insert the receiver

for wireless remote control into the function port of gimbal .

Open the wireless remote control.

Open the gimbal.

Use the wireless remote control to control the gimbal.

15 meters in an open environment.

Connect the Micro interface of wireless remote control

with 5V charger by USB cable.

Charging

Remote Control Distance

Power on / off

Please install

the receiver properly

before power on

Function

Button

Direction

Button

Direction Button

of The Wired Remote Control

Remote Control Operation Instructions

10 Specification

Extension Bar Diagram

Another way for extension is adjustable extension bar.

Adjustable Extension bar

Motionless Flat Surface

1. Install the smartphone properly.

2. Gimbal placed on stationary flat and keep motionless.

3. Power on the Gimbal.

4. The Gimbal is activate and it will initialize

automatically. Pick up the Gimbal to work normally.

Initialization Instructions

Gimbal needs to be initialized whenever the

following situations appear after power on

1. After power on, the angle of pitch is not level with the horizon line.

2. After power on, the angle of roll is not parallel with the horizon line.

3. When the gimbal is in heading static, the angle of heading moves frequently.

6Initialize The Gimbal

9Extension Bar Instructions (Optional)

With the special designed switch, the extension bar can be added directly. Allows to shoot the distance

images more easily. Special design allows for flexible extension.

8Battery Extender Accessory (Optional)

Battery extender contents:

Battery Extender Connection Picture

Charger

Rechargeable

Battery Input: DC 5V

Output: DC 4.2V

Type: 18650

Battery

Extender

Handheld

Accessory

Handle

Battery

Extender

Handheld

Accessory

Power

Switch

365g（Without batteries & smartphone）

Counter weight 52g

800 mA

Adaptation

320°

Working Voltage

320°（Maybe have some

difference in different smartphone）

100°

iPhone 6 Plus/6/5s/5c/5/4s/4and

other smartphones with similar dimensions

0.01 ~ 0.05 (Gimbal in static state)

Usage Time 2 ~ 3 Hours2°/S ~ 75°/S

6.0 V ~ 9 V

0.1 ~ 0.5 (Motor Overload<2G)

Motion Attitude

Tracking Accuracy

Static Attitude

Tracking Accuracy

Overload Current

Protection

Vertical Tilting Angle

Rolls Angle

Horizontal

Panning Angle

Tilting Increments

3°/S ~ 150°/SPanning Increments

Weight

Note: The function button will be disabled after connecting with the remote control.

Special Working Condition （Inversion Mode）

Can switch in other mode, or trip again to exit and reset

Under panning and tilting mode, single tap to switch to lock mode

Single tap to switch between panning mode and lock mode

Reset the tilting axis of the gimbal to initial orientation and initial mode

Reset (Restore to the boot-up state)

Power off

Calibration Using Remote Control

Operation

Explanation

Remark

Exit calibration and enter standby. Wake the gimbal

by pressing the function button once again

Tap Button Six Times

Match Code Mode

Match code when connecting properly but still control

in fail or change the receiver/wireless remote control

Tap Button Seven Times

Double Tap

Single Tap

Triple Tap

Quadruple Tap

Long Press For 3 Second

Wireless RC

( Please pick up the gimbal quickly once it is activated. )

Panning Mode / Lock Mode

Panning and Tilting Mode

Especificaciones del producto

Marca:	FeiYu-Tech
Categoría:	No categorizado
Modelo:	G4 Plus
Color del producto:	Black, Grey
Peso.:	16 g
Ancho:	200 mm
Profundidad:	15 mm
Altura:	8 mm
Longitud del cable:	0.06 m
Manual de usuario:	Ja
Conecta y reproduce:	Ja
Soporta Windows:	Windows 10, Windows 11, Windows 7, Windows 8
Soporta el sistema operativo Mac:	Mac OS X 10.2 Jaguar
Interfaz de host:	USB 3.2 Gen 1 (3.1 Gen 1) Type-C
Otros sistemas de apoyo:	ChromeOS
Ratio de transferencia:	480 Mbit/s
Número de puertos:	4
Interfaces de concentrador:	USB 3.2 Gen 1 (3.1 Gen 1) Type-C