Fellowes DS-12CS Manual de Usario

Fellowes trituradora de papel DS-12CS

Lee a continuación 📖 el manual en español para Fellowes DS-12CS (8 páginas) en la categoría trituradora de papel. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/8
Quality Office Products Since 1917
POWERSHRED®
DS-12Cs
Please read these instructions before use.
Do not discard: keep for future reference.
Veuillez lire ces instructions avant d’utiliser l’appareil.
Ne pas jeter : conserver afin de consulter les directives
ultérieurement, en cas de besoin.
Lea estas instrucciones antes del uso.
No las deseche: consérvelas como referencia futura.
2
KEY
CAPABILITIES
ENGLISH
Model DS-12Cs
Will shred: Paper, small paper clips, credit cards and staples
Will not shred: Continuous forms, CD/DVDs, adhesive labels, transparencies,
newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic
other than noted above
Paper shred size:
Cross-Cut ........................................................5/32 in. x 2 in. (3.9mm x 50mm)
Maximum:
Sheets per pass .................................................................................................12*
Cards per pass .....................................................................................................1*
Paper width 9 in. (229mm) ......................................................................................
* 8.5 in. p2-x11 in., 20lb., paper at 120V/60 Hz, 5.0Amps; heavier paper, humidity or (75g)
other than rated voltage may reduce capacity. Recommended daily usage rates: 120 sheets;
10 credit cards. 12 sheets per pass.
Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
H. Control switch and LEDs
I 1. Auto-On
O 2. OFF
R 3. Reverse
4. Standby (green)
5. SafeSense
®
Technology
(yellow)
6. Overheat (red)
A. Shredder head
B. Paper/credit card entry
C. Pull-out bin
D. Window
E. Safety Lock
F. Disconnect power switch
1. OFF
2. ON
G. See safety instructions
2
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
• Keepawayfromchildrenandpets.Keephandsawayfrompaperentry.Always
set to off or unplug when not in use.
• Keepforeignobjects–gloves,jewelry,clothing,hair,etc.–awayfromshredder
openings. If object enters top opening, switch to Reverse (R) to back out object.
• Neveruseaerosolproducts,petroleumbasedlubricantsorotherflammable
products on or near shredder. Do not use canned air on shredder.
• Donotuseifdamagedordefective.Donotdisassembleshredder.
Do not place near or over heat source or water.
• Operation,maintenance,andservicerequirementsarecoveredintheinstruction
manual. Read the entire instruction manual before operating shredders.
• ThisshredderhasaDisconnectPowerSwitch(F)thatmustbeintheON(–)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Avoidtouchingexposedcuttingbladesundershredderhead.
• Shreddermustbepluggedintoaproperlygroundedwalloutletorsocketofthe
voltage and amperage designated on the label. The grounded outlet or socket
must be installed near the equipment and easily accessible. Energy converters,
transformers, or extension cords should not be used with this product.
• FIREHAZARD–DoNOTshredgreetingcardswithsoundchipsorbatteries.
• Forindooruseonly.
• Unplugshredderbeforecleaningorservicing.
Warning: NOTE: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
 •Reorientorrelocatethereceivingantenna.
 •Increasetheseparationbetweentheequipmentandreceiver.
 •Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.
 •Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
A. G.
B.
H.
F
D.
C.
E.
3
BASIC PRODUCT MAINTENANCE
All cross-cut shredders require oil for peak performance.
If not oiled, a machine may experience diminished
sheet capacity, intrusive noise when shredding and could
ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty
your waste bin.
OILING SHREDDER
PAPER/CARD
BASIC SHREDDING OPERATION
Continuous operation:
4-5-minute maximum
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
4-5-minutes will trigger
20-minute cool down period.
PAPER JAM
ADVANCED PRODUCT FEATURES
SAFESENSE® TECHNOLOGY OPERATION
Stops shredding immediately when hands touch the paper opening.
SET-UP AND TESTING
TROUBLESHOOTING
A. Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum
operating temperature and needs to cool down. This indicator will remain illuminated and the shredder will
not operate for the duration of the recovery time. See Basic Shredding Operation for more information
about the continuous operation and recovery time for this shredder.
B. SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
®
indicator will illuminate
and the shredder will stop shredding.
A
Press Auto-On (I) Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
Alternate slowly back and forthSet to Reverse (R) Set to Off (O)
and unplug
Pull uncut paper from
paper entry
Set to Reverse (R)
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
Set to Reverse (R)
2-3 seconds
* Apply oil
across entry
Set to Off (O)
Set to Off (O) Press Auto-On ( I ) Feed into paper
entry and release
Hold card at edge Feed into center of
entry and release
Set to Off (O)
OR
A B
1 32 4 5 6
1 2 3
5
321 4 6
2 3
1

Especificaciones del producto

Marca: Fellowes
Categoría: trituradora de papel
Modelo: DS-12CS

¿Necesitas ayuda?

Si necesitas ayuda con Fellowes DS-12CS haz una pregunta a continuación y otros usuarios te responderán


trituradora de papel Fellowes Manuales

Fellowes

Fellowes Powershred 79Ci Manual de Usario

15 Octubre 2024
Fellowes

Fellowes Powershred C-525 Manual de Usario

8 Octubre 2024
Fellowes

Fellowes Powershred 225i Manual de Usario

5 Octubre 2024
Fellowes

Fellowes MicroShred MS-450Cs Manual de Usario

29 Septiembre 2024
Fellowes

Fellowes P-35C Powershred Manual de Usario

24 Septiembre 2024
Fellowes

Fellowes Powershred 1200C Manual de Usario

22 Septiembre 2024
Fellowes

Fellowes DS-12CS Manual de Usario

17 Septiembre 2024
Fellowes

Fellowes Powershred 11C-H Manual de Usario

14 Septiembre 2024
Fellowes

Fellowes Powershred LX22M Manual de Usario

14 Septiembre 2024
Fellowes

Fellowes Fortishred 4850S Manual de Usario

14 Septiembre 2024

trituradora de papel Manuales

Últimos trituradora de papel Manuales

Olympia

Olympia PS 58 CC Manual de Usario

27 Octubre 2024
Olympia

Olympia PS 53 CC Manual de Usario

27 Octubre 2024
Bonsaii

Bonsaii S123-B Manual de Usario

25 Octubre 2024
Bonsaii

Bonsaii C206-G Manual de Usario

25 Octubre 2024
Nedis

Nedis PASH110BKA4 Manual de Usario

2 Octubre 2024
GBC

GBC Momentum X26-32 Manual de Usario

18 Septiembre 2024
GBC

GBC AutoFeed+ 300M Manual de Usario

18 Septiembre 2024
GBC

GBC AutoFeed+ 150X Manual de Usario

18 Septiembre 2024
GBC

GBC Momentum X18-12 Manual de Usario

18 Septiembre 2024
GBC

GBC AutoFeed+ 300X Manual de Usario

18 Septiembre 2024