Fellowes MobilePro Series 8201901 Manual de Usario

Fellowes Teclado MobilePro Series 8201901

Lee a continuación 📖 el manual en español para Fellowes MobilePro Series 8201901 (40 páginas) en la categoría Teclado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/40

PLEASE READ INSTRUCTIONS BEFORE USE.

DO NOT DISCARD.

LIRE LES INSTRUCTIONS AVANT UTILISATION.

NE PAS JETER.

LEA LAS INSTRUCCIONES ANTES DEL USO.

NO TIRAR.

BITTE LESEN SIE DIE ANLEITUNGEN SORGFÄLTIG DURCH,

BEVOR SIE DAS GERÄT BENUTZEN.

BITTE GUT AUFBEWAHREN.

LEGGERE LE ISTRUZIONI PRIMA DELL’USO.

NON GETTARE.

LEES VÓÓR GEBRUIK DE INSTRUCTIES DOOR.

NIET WEGGOOIEN.

LÄS DESSA INSTRUKTIONER FÖRE ANVÄNDNING.

KASSERA EJ.

PRZED UŻYCIEM PROSZĘ PRZECZY TAĆ NINIEJSZĄ INSTRUKCJĘ.

NIE WYRZUCAĆ.

ПЕРЕД ИСПОЛЬЗОВАНИЕМ ПРОСЬБА ОЗНАКОМИТЬСЯ С ИНСТРУКЦИЯМИ.

НЕ ВЫБРАСЫВАТЬ.

LEIA AS INSTRUÇÕES ANTES DA UTILIZAÇÃO.

NÃO AS DEITE FORA.

MobilePro Series™

Bluetooth® Keyboard with Carrying Case

Clavier Bluetooth® avec étui de transport

Teclado Bluetooth®

con funda de transporte

Bluetooth® Tastatur mit Tragetasche

Tastiera Bluetooth® con borsa da trasporto

Bluetooth®-toetsenbord met draagkoffer

Bluetooth®-tangentbord med väska

Klawiatura Bluetooth® z etui

Клавиатура Bluetooth® с футляром для переноски

Teclado Bluetooth® com mala de transporte

CONTENTS

Bluetooth® Keyboard, Charging Cable and Carrying Case with Wrist Support.

USER MANUAL

Thank you for choosing Fellowes. For optimum performance, please read this instruction guide carefully before

operation. Keep for reference.

APPEARANCE

GETTING STARTED

1. BUTTONS

On/Off Slider Switch: Slide switch ON or OFF to turn the device ON or OFF

Connect Button: After the On/Off Slider Switch is in the ON position, press the Connect Button.

The keyboard is now ready to connect to your device.

2. STATUS LIGHTS

Caps Lock Light: Light will glow blue when Caps Lock is activated.

Bluetooth® Status Light: Press the Connect Button. The Bluetooth® Status Light will blink blue until the

keyboard connects with your device. After connecting with your device the blue light will turn off.

Charging Light: Light will glow red while the keyboard is charging. When the keyboard is fully charged the

light will turn off.

Power Light: Slide the On/Off Slider Switch to ON. The blue status light will illuminate for four seconds

and turn off to save power. Your keyboard is still on.

Charge PowerCAPS

Connect OFF/ON

Power Light

Charging Light

Bluetooth® Status Light

On/Off Slider

Connect Button

Caps Lock Light

Charge PowerCAPS

Connect OFF/ON

Esc/HomeESC Key

Virtual Keyboard

Select All

Copy

Paste

Cut

Change Language

Back

Play/Pause

Mute

Volume Down

Volume Up

Lock/DeleteDelete

*Press and hold down “FN” key and other funcon key simultaneously

Show Keyboard

Select All

Copy

Paste

Cut

Change Language

Play Previous Track

Play/Pause

Play Next Track

Mute

Volume Down

Volume Up

Lock/Delete*

Show Keyboard

Select All

Copy

Paste

Cut

Change Language

Play Previous Track

Play/Pause

Play Next Track

Mute

Volume Down

Volume Up

Lock

No Funconality

Select All*

Copy*

Paste*

Cut*

No Funconality

Play Previous Track*

Play/Pause*

Play Next Track*

Mute*

Volume Down*

Volume Up*

Delete

Key Funcon Key Icon Funconality on iOS Funconality on Android Funconality on Windows

F n

Home Home Opens Browser Window*

ENGLISH

PAIRING INSTRUCTIONS

PAIRING WITH iOS ®

Step 1: On the keyboard, slide the power button on. The blue status light will illuminate for 4 seconds and

then turn off to save power. Your keyboard is still on.

Step 2: On the iOS device, select: Settings – General – Bluetooth® – On.

Step 3: Press the connect button on the keyboard (the Bluetooth® indicator light will be blinking blue).

Step 4: The iOS device will display “Fellowes keyboard” as an available device.

Step 5: Select “Fellowes keyboard” on the iOS device. The iOS device will display a code.

Step 6: Type the code on the keyboard and press enter. The keyboard will now be paired to the iOS device.

Step 7: Switch the keyboard to iOS mode by holding the “Fn” key down and hitting the “Q” key.

SPECIFICATION

1. Working voltage: 3.0-4.2 V

2. Working current: < 2.5 mA

3. Standby current: < 0.3 mA

4. Charging current: > 100 mA

5. Operating temperature: -10 to 55 C°

6. Operating distance: Up to 10 meters

7. Charging time: < 4 hours

8. Lithium battery capacity: 280 mA

9. Battery working time: 90 hours

10. Battery life: 3 years

11. Battery size: 3.8 x 20 x 35mm

12. Keystroke life: 3 million strokes

13. Standby time: 90 days

PAIRING WITH ANDROID™

Step 1: On the keyboard, slide the power button on. The blue status light will illuminate for 4 seconds and

then turn off to save power. Your keyboard is still on.

Step 2: On the device, select Settings -> Bluetooth® -> Turn Bluetooth® on, and select “scan for devices”.

Step 3: Press the connect button on the keyboard (the Bluetooth® indicator light will blink blue).

Step 4: The Android device will display “Fellowes keyboard” as an available device.

Step 5: Select “Fellowes keyboard” on the Android device. The Android device will display a code.

Step 6: Type the code on the keyboard and press enter. The keyboard will now be paired to the Android device.

Step 7: Switch the keyboard to Android mode by holding the “Fn” key down and hitting the “W” key.

PAIRING WITH WINDOWS®

Step 1: On the keyboard, slide the power button on. The blue status light will illuminate for 4 seconds and

then turn off to save power. Your keyboard is still on.

Step 2: On the device, go to Settings -> PC + Devices -> Bluetooth® -> Turn Bluetooth® on, and select

“search for a device”.

Step 3: Press the connect button on the keyboard (the Bluetooth® indicator light will blink blue).

Step 4: The Windows device will display “Fellowes keyboard” as an available device.

Step 5: Select “Fellowes keyboard” on the Windows device. The Windows device will display a code.

Step 6: Type the code on the keyboard and press enter. The keyboard will now be paired to the Windows device.

Step 7: Switch the keyboard to Windows mode by holding the “Fn” key down and hitting the “E” key.

1. Plug the Micro-USB charging cable into the keyboard.

2. Plug the USB port into a computer or power adapter, if you have one - not included.

3. Charge for 4 hours or until the charge indicator light turns off.

Charge PowerCAPS

Connect OFF/ON

CHARGING INSTRUCTIONS

Glowing Red Battery needs charging/charging in progress

Turns Off Battery is fully charged

Charge

POWER SAVE MODE

The keyboard will enter sleep mode after being idle for 15 minutes. To activate it from sleep mode, press any

key and wait 3 seconds.

Especificaciones del producto

Marca:	Fellowes
Categoría:	Teclado
Modelo:	MobilePro Series 8201901
Peso.:	32000 g
Peso del embalaje:	47000 g
Activos:	90 W
Diagonal de la pantalla:	42 "
Resolución:	1366 x 768 Pixels
Ángulo de visión, horizontal:	178 °
Ángulo de visión, vertical:	178 °
Brillo:	550 cd/m²
Energía promedio:	2 W
Consumo de energía (en espera):	1 W
Resolución de pantalla (numérica):	1366 Pixels
Tiempo de respuesta:	8 ms
Diámetro de la pantalla en centímetros.:	107 cm
Teletekst:	10 pagina's
Número de conexiones AV:	5
Número de canales:	100 kanalen
Dimensiones (An x Pr x Al) con base:	1249 x 305 x 760 mm
Dimensiones de la caja (An x Pr x Al):	1364 x 330 x 957 mm