Fellowes Orion E 500 Manual de Usario
Fellowes
máquina de encuadernación
Orion E 500
Lee a continuación 📖 el manual en español para Fellowes Orion E 500 (54 páginas) en la categoría máquina de encuadernación. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/54
1789 Norwood Avenue, Itasca, Illinois 60143 • 1-800-955-0959 • www.fellowes.com
B r a n d s
© 2016 Fellowes, Inc. | Part #405609 Rev C
Heavy Duty Comb Binder
ENGLISH 3-6
FRANCAIS 7-10
ESPAÑOL 11-14
DEUTSCH 15-18
ITALIANO 19-22
NEDERLANDS 23-26
SVENSKA 27-30
DANSK 31-34
SUOMI 35-38
NORSK 39-42
POLSKI 43-46
РУССКИЙ 47-50
EΛΛΗΝΙΚΑ 51-54
TÜRKÇE 55-58
ČESKY 59-62
SLOVENSKY 63-66
MAGYAR 67-70
PORTUGUÊS 71-74
БЪЛГАРСКИ 75-78
ROMÂNĂ 79-82
HRVATSKI 83-86
SLOVENŠČINA 87-90
SRPSKI 91-94
95-98
99-102
Please read these instructions before use.
Lire ces instructions avant utilisation.
Lea estas instrucciones antes de usar la máquina.
Diese Anleitungen vor Gebrauch genau durchlesen.
Primo dell’uso, si raccomanda di leggere questo manuale di
istruzioni.
Lees deze instructies zorgvuldig door voordat u de machine in
gebruik neemt.
Läs dessa anvisningar innan du använder apparaten.
Læs venligst denne vejledning før anvendelse.
Lue nämä ohjeet ennen käyttöä.
Vennligst les nøye igjennom denne bruksanvisningen før bruk.
Przed użyciem proszę zapoznać się z niniejszą instrukcją.
Перед эксплуатацией устройства ознакомьтесь с
содержанием данной инструкции.
Διαβάστε τις παρακάτω οδηγίες πριν από τη χρήση.
Kullanmadan önce lutfen bu talimatlari okuyen.
Pred použitím si pročtěte tyto pokyny.
Pred poużitím si prečítajte tieto pokyny.
Kérjük, hogy használat elött olvassa el az utasításokat.
Leia estas instruções antes da utilização.
Моля, прочетете инструкциите преди употреба.
Vă rugăm să citiţi instrucţiunile înainte de utilizare.
Pažljivo pročitajte ove upute prije korištenja.
Pred uporabo izdelka preberite ta navodila za uporabo.
Molimo da ova uputstva pročitate pre upotrebe.
FR
GB
DE
IT
ES
NL
SE
DK
FI
N0
PL
RU
GR
TR
CZ
HU
PT
BG
RO
HR
SI
SR
AR
HB .
SK
INDEX
CUSTOMER SERVICE & SUPPORT
www.fellowes.com
Europe Freephone: 00800-1810-1810
Benelux: +31-(0)-13-458-0580
Deutschland: +49 (0)511 545489-0
France: +33 (0) 1 78 64 91 00
Italia: +39-071-730041
Polska: +48 (22) 205-21-10
España/Portugal: +34-91-748-05-01
United Kingdom: +44 (0) 1302 836836
Declaration of Conformity
Fellowes, Inc.
Unit 2 Ontario Drive, New Rossington, Doncaster, DN11 0BF, England declares that the product model Orion E conforms with the
requirements of the Restriction of Hazardous Substances Directive (2011/65/EU), the Low Voltage Directive (2014/35/EU), the
Electromagnetic Compatibility Directive (2014/30/EU), the WEEE directive (2012/19/EU), and below harmonized European EN
Standards.
Safety: EN60950-1: 2006/A2:2013
EMC Standard: EN55014-1:2006+A1:2009+A2:2011
EN55014-2:1997+A1:2001+ A2:2008
EN61000-3-2:2014
EN61000-3-3:2013
Year Affixed: 16
Itasca, Illinois, USA
July 1, 2016
John Fellowes
405609_RevC_EUR_Orion_E_25L_103116.indd 110-2 10/31/16 4:34 PM
43
CAPABILITIES
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
When punching;
- always ensure the machine is on a stable surface
- test punch scrap sheets and set the machine before punching final
documents
- remove staples and other metal articles prior to punching
- never exceed the machines quoted performance
Keep the machine away from heat and water sources.
Never attempt to open or otherwise repair the machine.
When binding;
- Keep the machine away from heat and water sources.
- Never attempt to open or otherwise repair the machine.
- Plug the machine into an easily accessible socket.
- Note – this machine has a thermal cut-out device which activates
when the machine is overheated during use. It will automatically reset
when the machine is safe to operate.
Punching Capacity
Paper sheets
70 - 80g / 20lb 30 sheet
Transparent covers
100-200 micron / 4 - 8 mil. 4 sheet
200+ micron / 8+ mil. 3 sheet
Other standard covers
160-270g / 40 - 60lb 4 sheet
270+g / 60+ lb 3 sheet
Binding Capacity
Max binding comb size 51 mm
Max document (80g / 20lb) approx. 500 sheets
Technical Data
Paper dimensions A4, A5, US letter, US cover
Punching slots 21
Releasable dies 21 dies (1 - 21)
Adjustable back margin 5 positions - (2.5 - 6.5mm)
Slot pitch 14.28 mm / 9/16”
Adjustable edge guide Yes
Waste tray capacity approx. 1800 sheets
Net weight 17 kg / 37lb
Dimensions (WxDxH) 40 x 40 x 25 cm
Voltage 220-240V 50/60Hz
Motor wattage 160W 1.0A
ENGLISH
Need Help?
Let our experts help you with a solution.
Customer Service... www.fellowes.com
Always call Fellowes before contacting your place of purchase (see the
rear cover for contact details.
Adjustable
edge guide
Waste tray
Punch selection
Paper entry
Document measure
Comb opening
lever Back margin
adjustment
Foot pedal
COMB DIAMETER & DOCUMENT SIZES
SET UP
Comb diameter sizes
To select the correct size comb diameter for a document use the document measure card as printed on the machine.
Ensure the machine is on a
stable surface.
Plug the machine into an eas-
ily accessible mains socket.
21 3
Switch the power on (located at
the rear of the machine).
Check the waste tray is empty
and correctly fitted.
4
5
Ensure the comb opening lever
is pushed backwards.
405609_RevC_EUR_Orion_E_25L_103116.indd 5,4 10/31/16 4:34 PM
65
REMOVAL OF WASTE CLIPPINGS
TROUBLESHOOTING
Problem
No power
Not punching
Punched holes are not central
Machine will not punch
Punch holes are not parallel to
edge
Partial holes
Missing holes
Damaged hole edges
Cause
Machine is not switched on
Thermal cut-out switch has activated
Edge guide not set
Blockage
Debris is stuck below dies
Sheets not correctly aligned to punch
pattern
Selectable dies are not selected to punch
Possibly overloading the machine
Solution
Switch on machine at rear next to plug inlet and at the
socket
Allow machine to cool down for 30-60 minutes.
Adjust edge guide until hole pattern is correct
Check waste tray is empty. Check for blockage to paper
entry
Take stiff cardboard and slide into the paper entry. Move
the cardboard sideways to release any stray clippings into
the waste tray
Adjust edge guide and test punch scrap sheets until correct
Check the current dies are selected to punch holes. To
select a die, push selector switch down at the front
Punch plastic covers with paper sheets. Reduce number of
sheets being punched
The tray should be emptied after every 50 operations to ensure no blockages occur.
This machine is fitted with a fuse, located between the mains switch and mains socket on the rear of
the machine. To replace the fuse;
• Isolate the machine from the mains supply.
• Open the fuse holder with a screwdriver blade.
The holder contains two fuses, the loose fuse is a spare.
• Insert a new fuse in the holder and replace the holder in to the machine.
NOTE: Always use the recommended fuse (120W / 2A) and DO NOT replace it with one of a
different rating.
BEFORE YOU BIND
Select the correct comb diameter
using the document measure.
Select the correct punch profile for
the sheet size. Select releasable
dies as appropriate.
Select the correct back margin
depth for the number of sheets.
To cancel a punch, pull the pin
forward. Test punch a sheet.
2 43
Insert the plastic comb into the
opening mechanism. Pull comb-
opening lever forward to open
the comb.
Test punch scrap sheets to check
edge guide setting.
Load punched sheets directly
onto the open comb.
5 6 7
Empty waste tray regularly -
ideally after each use.
8
Back
Cover
BINDING A DOCUMENT
Punch front and back covers
first.
Punch sheets in small batches
that do not overload the
machine or the user.
When all punched sheets are
loaded onto the comb, push
the comb lever backwards to
close the comb and remove the
bound document.
Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
21 43
Front
Cover
MAX 30
(80gsm)
1
CORRECTING A BOUND DOCUMENT
Additional sheets may be added or removed at any time by opening and then closing the comb as previously described.
405609_RevC_EUR_Orion_E_25L_103116.indd 6 10/31/16 4:34 PM
Especificaciones del producto
| Marca: | Fellowes |
| Categoría: | máquina de encuadernación |
| Modelo: | Orion E 500 |
¿Necesitas ayuda?
Si necesitas ayuda con Fellowes Orion E 500 haz una pregunta a continuación y otros usuarios te responderán
máquina de encuadernación Fellowes Manuales
21 Agosto 2024
27 Julio 2024
máquina de encuadernación Manuales
- máquina de encuadernación United Office
- máquina de encuadernación GBC
- máquina de encuadernación Peach
- máquina de encuadernación Pavo
- máquina de encuadernación Leitz
Últimos máquina de encuadernación Manuales
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
21 Octubre 2024
17 Octubre 2024
15 Septiembre 2024
14 Septiembre 2024
11 Septiembre 2024
11 Septiembre 2024