Fellowes Powershred 450Cs Manual de Usario

Fellowes trituradora de papel Powershred 450Cs

Lee a continuación 📖 el manual en español para Fellowes Powershred 450Cs (4 páginas) en la categoría trituradora de papel. Esta guía fue útil para 14 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Quality Office Products Since 1917

Please read these instructions before use.

Do not discard: keep for future reference.

POWERSHRED® 450Ms

A. SafeSense

Technology

B. CD entry

C. See safety instructions

D. Paper/card entry

E. Pull-out bin

F. Window

G. Casters

H. ON/OFF switch

1. OFF

2. ON

Will shred: Paper, credit cards, CD/DVDs and staples

Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper,

cardboard, laminates, paper clips, file folders, X-rays or plastic other than noted above

Paper/card shred size:

Micro-Cut .......................................................................................................2mm x 8mm

CD shred size:

Strip-Cut 8mm ....................................................................................................................

Maximum:

Sheets per pass ............................................................................................................. 7*

Cards/CDs per pass ....................................................................................................... 1*

Paper entry width .................................................................................................. 224mm

CD entry width ...................................................................................................... 124mm

* A4 (70g), paper at 220V-240V, 50/60 Hz, 1.7Amps; heavier paper, humidity or other

than rated voltage may reduce capacity. Maximum recommended daily usage rates: 300

sheets per day; 25 credit cards; 5 CDs. 7 sheets per pass to avoid jams.

Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging

between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.

CAPABILITIES

ENGLISH

Model 450Ms

KEY

IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!

• Operation,maintenance,andservicerequirementsarecoveredintheinstruction

manual. Read the entire instruction manual before operating shredders.

• Keepawayfromchildrenandpets.Keephandsawayfrompaperentry.Alwaysset

to off or unplug when not in use.

• Keepforeignobjects–gloves,jewelry,clothing,hair,etc.–awayfromshredder

openings. If object enters top opening, switch to Reverse ( ) to back out object.

• Neveruseaerosolproducts,petroleumbasedlubricantsorotherflammable

products on or near shredder. Do not use canned air on shredder.

• Donotuseifdamagedordefective.Donotdisassembleshredder.

Do not place near or over heat source or water.

• ThisshredderhasanON/OFFSwitch(H)thatmustbeintheON(I) position to

operate shredder. In case of emergency, move switch to OFF (O) position. This

action will stop shredder immediately.

• Avoidtouchingexposedcuttingbladesundershredderhead.

• Shreddermustbepluggedintoaproperlygroundedwalloutletorsocketofthe

voltage and amperage designated on the label. The grounded outlet or socket

must be installed near the equipment and easily accessible. Energy converters,

transformers, or extension cords should not be used with this product.

• FIREHAZARD–DoNOTshredgreetingcardswithsoundchipsorbatteries.

• Forindooruseonly.

• Unplugshredderbeforecleaningorservicing.

I. Control Panel and LEDs

1. Overheat (red)

2. SafeSense

indicator (yellow)

3. ON/OFF (blue)

4. Reverse

5. Forward

ADvANCED PRODUCT FEATURES

SafeSense® Technology

Stops shredding immediately when

hands touch the paper opening.

SilentShred™ Technology

Shreds without noisy disruptions

SafeSense

is active and

working properly

Touch test area and

look for the SafeSense

indicator to illuminate

SAFESENSE® TECHNOLOGY

SET-UP AND TESTING

Stops shredding immediately when hands touch the paper opening.

2 3

For more information about all of Fellowes Advanced Product Features go to www.fellowes.com

PRODUCT MAINTENANCE

TO CLEAN THE SENSORS

CLEANING AUTO-START INFRARED SENSORS

Paper detection sensors are designed for maintenance free operation. However, on rare

occasions the sensors may become blocked by paper dust causing the motor to run even if there

is no paper present.

(Note: two paper detection sensors are located in the center of the paper entry).

All micro-cut shredders require oil for peak performance. If not oiled, a

machine may experience diminished sheet capacity, intrusive noise when

shredding, and could ultimately stop running. To avoid these problems, we

recommend you oil your shredder each time you empty your waste bin.

OILING SHREDDER

* Only use a non-aerosol vegetable oil in long

nozzle container such as Fellowes 35250

FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE

Locate Auto-start

infrared sensor

Using cotton swab, wipe

away any contamination

from the paper sensors

Dip cotton swab in

rubbing alcohol

Press and hold forward

( ) 2-3 seconds

*Apply oil across entry

1 2

Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.

Turn the shredder ON

(I) to activate SafeSense

Turn OFF (O) and

unplug shredder

TROUBLESHOOTING

Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This indicator will remain

illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about the continuous operation and recovery

time for this shredder.

SafeSense

Indicator: If hands are too close to the paper entry, the SafeSense

indicator will illuminate and the shredder will stop shredding.

PAPER/CARD OR CD

BASIC SHREDDING OPERATION

Plug in and

turn ON (I)

Continuous operation:

Up to 8-minutes maximum

NOTE: Shredder runs briefly after each pass to

clear entry. Continuous operation beyond 8-minutes