Fender '63 Vibroverb Manual de Usario
Fender
amplificador de guitarra
'63 Vibroverb
Lee a continuación 📖 el manual en español para Fender '63 Vibroverb (7 páginas) en la categoría amplificador de guitarra. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/7
T H E S O U N T H A T C R E A T E S L E G E N D SD
P/N 037307
Owner,s Manual
‘63 Vibroverb
Your “new” ‘63 VIBROVERB amplifier is living proof of the
quality and longevity of Fender amplifier designs.
Fender first introduced the VIBROVERB in the early part of
1963. Unlike many of the other Fender amplifiers that
were produced for years, this version of the VIBROVERB
had a production life of less than 4 months. It is estimated
that fewer than 600 VIBROVERB units were ever produced.
This limited production is one of the reasons this amplifier
has become highly sought after by vintage amp collectors.
The VIBROVERB was the first Fender production model to
have both reverb and vibrato as built-in “effects”.
The original VIBROVERB shows Fender in a transitional
period with amplifiers changing from tweed covering to
brown “Tolex” and eventually to black “Tolex.” In the sum-
mer and fall of 1963, Fender changed the speaker configu-
ration of the VIBROVERB to a 15 inch speaker and the
brown “Tolex” covering changed to black. The single 15
inch model is also fairly rare, but the 2-10 version is leg-
endary.
Fender’s ‘63 VIBROVERB re-issue amplifier is based on the
original cosmetics, sound and circuit. Every effort was
made to be true to the original.
Several changes have been made for safety and reliability
reasons. A printed circuit board is used rather that the
phenolic “parts panel” of the sixties. A 3-prong line cord is
required for safety reasons. Minor modifications to the cir-
cuit took place since certain parts are no longer available,
but every effort was made to keep the original circuit values
and sound the same. We resisted the temptation to
“improve” the amp with features found on later models like
master volume, effects loop or channel switching. In order
to improve reliability, a solid state rectifier was used rather
than a 5AR4 tube. Since the ‘63 VIBROVERB uses a solid
state rectifier, there is one less tube and tube socket than an
original VIBROVERB. All internal circuit voltage values
have been precisely matched to the new solid state rectifier
to insure exact sonic reproduction and no alterations to the
“vintage” sound. On the original model, the Reverb /
Vibrato Footswitch connected to the unit via 2 RCA style
jacks; this has been changed to a more reliable 1/4” jack.
The reverb pan cables now connect more securely to the
chassis also.
The VIBROVERB is unique in Fender amplifier history by the
implementation of its tone circuit. The VIBROVERB was the
first and ONLY Fender amplifier to use this type of tone cir-
cuit. The treble control is “tapped,” meaning it responds
more like an active tone control allowing boost AND cut of
high frequencies. Conventional Fender tone circuits pro-
vide a small amount of tone shaping even in the “0” posi-
tion, but if the VIBROVERB Treble Control is set to about
“5”, the response is flat.
The speakers used in the ‘63 VIBROVERB are reproductions
of the original speakers made by the Oxford Speaker
Company. When Fender started work on this project,
Fender contacted Oxford who still had much of the original
tooling and documentation of this 10 inch speaker from the
early sixties.
The power and output transformers used in the ‘63
VIBROVERB are built to the original specifications, which
are still in the R&D engineering files at Fender’s office. The
same “direct-coupled” oscillator circuit is used for generat-
ing the vibrato. The reverb sound from the VIBROVERB is
“warmer” than later Fender amps due to the unique reverb
send and recovery circuit.
The cosmetics of the ‘63 VIBROVERB incorporate the brown
“Tolex” and “Ecru” grill cloth used in 1963. We have re-
tooled the “flat” Fender logo and have added the original
tilt-back legs found on so many Fender amps through the
sixties and seventies.
It is suggested that you read this manual thoroughly to
understand all the features and functions of your new
amplifier. The purchase of a Fender amplifier will provide
years of musical enjoyment and the ‘63 VIBROVERB helps
keep the Fender legend going strong.
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK
HAZARD, DO NOT EXPOSE AMPLIFIER TO RAIN OR
MOISTURE!
INTRODUCTION
‘63 VIBROVERB FRONT PANEL FUNCTIONS
NORMAL CHANNEL INPUTS - Plug-in connection for
instruments. Input 1 provides 6 dB more gain that
input 2. The NORMAL CHANNEL is affected by the
VIBRATO feature only. The REVERB feature does not
affect the NORMAL CHANNEL.
NORMAL CHANNEL VOLUME CONTROL - Adjusts the
overall loudness of the NORMAL CHANNEL.
TREBLE CONTROL - Adjusts the amount of high fre-
quency boost (accentuation) or cut (attenuation) in the
NORMAL CHANNEL.
BASS CONTROL - Adjusts the amount of low frequency
boost or cut in the NORMAL CHANNEL.
BRIGHT CHANNEL INPUTS - Plug-in connection for
instruments. The BRIGHT CHANNEL provides extra
treble boost, especially at low volume settings. Input 1
provides 6 dB more gain that input 2. The BRIGHT
CHANNEL is affected by both the REVERB and
VIBRATO features.
BRIGHT CHANNEL VOLUME CONTROL - Adjusts the
overall loudness of the BRIGHT CHANNEL.
TREBLE CONTROL - Adjusts the amount of high fre-
quency boost or cut in the BRIGHT CHANNEL.
BASS CONTROL - Adjusts the amount of low frequency
boost or cut in the BRIGHT CHANNEL.
REVERB CONTROL - Adjusts the amount of reverberat-
ed signal that is mixed in with the original, dry signal.
Turning the control full counter-clockwise turns the
REVERB feature off. The REVERB feature can also be
turned on and off using the footswitch. Note that the
REVERB feature does not affect the NORMAL CHAN-
NEL.
VIBRATO SPEED CONTROL - Adjusts the speed of the
VIBRATO feature.
A,B.
C.
D.
E.
F,G.
H.
I.
J.
K.
L.
Especificaciones del producto
| Marca: | Fender |
| Categoría: | amplificador de guitarra |
| Modelo: | '63 Vibroverb |
¿Necesitas ayuda?
Si necesitas ayuda con Fender '63 Vibroverb haz una pregunta a continuación y otros usuarios te responderán
amplificador de guitarra Fender Manuales
3 Octubre 2024
3 Octubre 2024
3 Octubre 2024
3 Octubre 2024
3 Octubre 2024
2 Septiembre 2024
30 Agosto 2024
28 Agosto 2024
28 Agosto 2024
26 Agosto 2024
amplificador de guitarra Manuales
- amplificador de guitarra Ampeg
- amplificador de guitarra Vox
- amplificador de guitarra Roland
- amplificador de guitarra ART
- amplificador de guitarra Peavey
- amplificador de guitarra Boss
- amplificador de guitarra Marshall
- amplificador de guitarra Radial Engineering
- amplificador de guitarra Blackstar
- amplificador de guitarra SPL
- amplificador de guitarra Hughes & Kettner
- amplificador de guitarra Ashdown Engineering
- amplificador de guitarra Markbass
- amplificador de guitarra Fishman
- amplificador de guitarra EBS
- amplificador de guitarra DV Mark
- amplificador de guitarra Budda
- amplificador de guitarra DACS Audio
Últimos amplificador de guitarra Manuales
21 Octubre 2024
21 Octubre 2024
22 Septiembre 2024
21 Septiembre 2024
19 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024