Fenton BoomBox400 Manual de Usario

Fenton Vocero BoomBox400

Lee a continuación 📖 el manual en español para Fenton BoomBox400 (16 páginas) en la categoría Vocero. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
BoomBox400
Ref. nr.: 8.317 71
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRU IONS CT
INSTRUKCJA OBSŁUGI
V1.2
2
ENGLISH
Congratulations to the purchase of this Fenton produc Please read this manual thoroughly prior to using the unit in order to t.
benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or ctrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock. ele
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. is is normal and will disappear Th
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfuncti on.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
ne to be replaced by a qualied technician. ed
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid re and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the xture on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the control s.
- is unit is with speaker inside which can cause Th
magnetic eld. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specications battery. And dispose the damaged battery
environment friendly.
- If the u has fallen, always have it checked by a nit
qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit o prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the uni t.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude cause a shock hazard. to
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make any changes to the unit. They would invalidate the CE certicate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the it. This would also invalid un
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations
and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.
CONTROLS AND CONN TIONS EC
1. 9VDC POWER INPUT
Connector for inserting the supplied power adapter.
Speaker can be used while charging.
2. USB RT PO
Connect your USB devices to this slot to play music
with MP3 or WMA format.
3. SD CARD SLOT
Insert an SD card in this slot to be able to play SD
card MP3 music les.
4. AUX INPUT
3.5mm auxiliary l input jack.ine
5. MICROPHONE INPUT
6.3 jack input for connecting a microphonmm e.
6. MODE
Press this button to switch between USB/SD-, AUX-,
FM and BT modes.
7. REC
Press to record the signal from the microphone input
(when USB is inserted).
8. PLAY/PAUSE LINK /
Press button to start/resume or pause playback. Press and hold for 3 seconds to initiate the ster pair (link) function.eo
9. MENU
Press to change bass/treble/ec . ho
10. PREVIOUS
Press to change to previous track/channel.
11. VOLUME CONTROL
Turn to adjust the volume output level.
12. NEXT
Press to change to next track/channel.
13. POWER SWITCH
Press to turn the device /o. on
14. LED
Press and hold to turn the party lighting on/o, press to change lighting eect.
15. MICROPHONE PRIORITY
Press to switch microphone priority function on/o. When set to on, microphone input will have priority, meaning the music
volume level will be turned down when a microphone input signal is detected.
16. REPEAT
Press to toggle repeat modes.
BT CONNECTI ON
1. Activate the on your dBT evice (Mobile phone, tablet etc.) which you want to play the music.
See the operating instructions for that device.
2. Press the “MODE” button and activate the -function. BT
3. 400 BoomBoxSelect “ ” on your device and pair BT .
Attention: distance is approx. 10meter w hout any barrier.BT it
STEREO PAIRING / LINK
The and feature a stereo pairing function. This means you ca purchase 2 a /or BoomBox400 BoomBox440 n BoomBox 400 nd
BoomBox440 speakers and connect them to play in stereo wirelessly. set up a BT connection with speaker 1. Step 1: Step 2:
set speaker 2 to BT mode. hold the button on speaker 1 and 2 for 3 seconds When pairing is Step 3: PLAY/PAUSE LINK/ .
successful, you ll hear a chime to conrm.

Especificaciones del producto

Marca: Fenton
Categoría: Vocero
Modelo: BoomBox400

¿Necesitas ayuda?

Si necesitas ayuda con Fenton BoomBox400 haz una pregunta a continuación y otros usuarios te responderán




Vocero Fenton Manuales

Vocero Manuales

Últimos Vocero Manuales