Fenton SPA1200 Manual de Usario

Fenton Vocero SPA1200

Lee a continuación 📖 el manual en español para Fenton SPA1200 (12 páginas) en la categoría Vocero. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
SPA-Series Active Speaker set
Item: 170.143; 170.146; 170.149
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
V1.3
4
FRONT PANEL
1. ualizer 5-Bands Left Channel Eq
2. LED VU-meter
3. Equalizer 5-Bands Right Channel
4. Microphone 1 and 2, Jack 6.3mm (¼”)
5. Microphone delay control
6. Microphone echo control
7. Microphone volume control
8. Master volume control
9. USB
10. /MMC SD
11. Input selector
12. MP3 Play/Pause
13. MP3 next track / Volume +
14. MP3 previous track / Volume-
BACKPANEL
15. Line input
16. Speaker output
17. AC Power cable
18. Power switch
WARNING:
After long time using the back panel will be hot, do not touch it
by hand.
5
OPERATION:
Connect the passive speaker with the delivered speaker cable to the speaker output connector ( ). 16
WARNING: connect the supplied passive speaker on the speaker output terminal only!
If required connect an external signal source like a CD-layer to LINE IN. Connect the device with an electric outlet
(230VAC / 50Hz)
LINE INPUT (DVD, CD-player etc.):
1. Connect the source (DVD-player, CD-player etc.) to the line input ( ) on the rear panel. 15
2. Select by pressing input selector switch (2) LINE mode.
USB/SD:
1. Insert an USB (9) or SD device (10).
2. Push the input selector (4) to USB / SD mode .
3. Press PLAY button, MP3 begin to play.
MICROPHONE:
1. Insert the microphone to the MIC1 or MIC2 jack (4).
2. Adjust the MIC volume (7).
3. Adjust the echo (6) and delay (5) control.
BT
1. Press input button (11) until the LED indicator will ashing fast.
2. Make connection between your BT-device and speaker.
3. When LED indicator flash slowly the connection is paired. BT
Volume control can be adjusted with the master VOLUME (8). Make sure that when you turn on the active
speaker's volume control is minimal. Adjust the Equalizer (1+3) to get the right sound.
TROUBLE SHOOTING
Failure
Possible cause
NO POWER
The power line is cut o or not connected
No power on the electric outlet
NO SOUND
Wrong input, check input selection
The volume knob at lowest
ONE SPEAKER WITHOUT SOUND
Connection between master & slave unit wrong
Signal line was broke
MICROPHONE NO SOUND
The microphone not complete connected
Adjust the microphone volume
Change microphone
MICROPHONE HOWL
The microphone is too close to the speaker
Master volume is set to high

Especificaciones del producto

Marca: Fenton
Categoría: Vocero
Modelo: SPA1200

¿Necesitas ayuda?

Si necesitas ayuda con Fenton SPA1200 haz una pregunta a continuación y otros usuarios te responderán




Vocero Fenton Manuales

Vocero Manuales

Últimos Vocero Manuales