Ferm FBS-1000 Manual de Usario
Lee a continuación 📖 el manual en español para Ferm FBS-1000 (4 páginas) en la categoría lijadora. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/4
Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0303-11
Ferm Belt Sander
FBS-1000
USER’S MANUAL
Art.nr. 730900
Screwfix Art.nr. 00000
UK Subject to change
Document Ref:
FBS-1000/00000/AAA00/issue 0/Month 00
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
FERM BELT SANDER FBS-1000
USERS MANUAL
TECHNICAL SPECIFICATIONS
PRODUCTINFORMATION
Fig. A
The belt sander is the perfect tool to sand wood and to
grind iron, plastic or similar materials.
The belt sander must be used for the rough work, for the
normal sanding work an orbital sander must be used.
1. On/off switch
2. Front handle
3. Rear handle
4. Blocking switch
5. Dust collection opening
6 Adjusting knob
7. Sanding belt fastener
8. Front belt roller
9. Direction indicator
10. Drive belt cover
11. Dust bag
PACKAGE CONTENTS
1 Belt sander
3 Sanding belts
1 Dust collection bag
1 Instruction manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for
transport damage.
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Ferm products are manufactured to high quality stan-
dards they are safe and fit for purpose at time of sale, but
all tools can be dangerous if the correct precautions are
not taken. Always follow these instructions, do not carry
out the operation until you are sure you can do so in saf-
ety. Remember to consider the work environment for
safe operation as well as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting, drilling or sanding is
dusty, in particular chipboard or MDF. Approved safety
footwear and headgear should worn as appropriate, for
example on building works or when heavy weights are
involved. Wear suitable gloves and apron to protect
against sparks/debris. Wear earplugs or ear defenders.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair.
11 5
2
3
10
8
1
4
6
9
7
Voltage | 230 V~
Frequency | 50 Hz
Power input | 1000 W
No load sander paper speed | 320 m/min
Sanding belt size | 100 x 533 mm
Sanding pad size | 100 x 135 mm
Weight | 4.8 kg
Lpa (Sound pressure) | 93.5 dB(A)
Lwa (Sound power level) | 106.5 dB(A)
Vibration value | 4.729 m/s2
UK English
2 7Ferm Ferm
EXPLODED VIEW
6Ferm
Stay alert
Watch what you are doing Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
OPERATIONAL SAFETY
Warning! Be aware this sander can produce fine
dust, which can be hazardous to your health.
Some older painted surfaces may contain harmful lead. Clean
the area and tool thoroughly after sanding.
Always use a suitable mask, eye protection, gloves and use
dust extraction during sanding and cleaning.
Concentrate
Routine and repetition can lead to mistakes. Remember
that a slight lack of concentration can result in serious
injuries in a split second.
Keep work area clean
Cluttered areas and benches invite injuries.
Consider the work environment
Do not expose power tools to rain or use them in damp
or wet locations. Keep work area well lit. Do not use
power tools in the presence of flammable liquids, vap-
ours or gases.
Guard against electric shock
This unit contains dangerous voltages. Use a RCD (resi-
dual current device) to provide protection against elec-
trical shock. Prevent body contact with grounded sur-
faces (e.g. pipes, radiator, ranges or refrigerators).
Keep children and pets away
Do not let children or pets come into contact with the
tool, extension cable or work area.
Do not force the tool
It will work better and safer at the rate for which it was
intended.
Use the right tool
Do not force small tools or attachments to do the job of a
heavy-duty tool. Do not use tools for purposes for which
they were not intended; for example do not use a circular
saw for cutting trees or logs.
Do not abuse the cable
Never carry the tool by the cable or pull it to disconnect
it from the power socket. Keep the cable away from heat,
oil and sharp edges. Do not touch the metal plug pins
when connecting or removing the plug.
Do not over-reach
Keep a proper footing and balance at all times.
Disconnect tools from power supply
When not in use, before servicing and when changing
accessories such as blades, bits and cutters.
Always switch off and unplug the sander from the
power supply before making adjustments or chan-
ging abrasive belts.
Remove adjusting keys and wrenches
Ensure that they are removed from the tool before swit-
ching on.
Avoid unintentional starting
Do not carry plugged in tools with your finger on the
switch. Check that the switch is off before plugging in to
socket.
Extension cables
Use only three core earthed extension cables suitable
for the power input of the tool (minimum cable size
1.5mm2). Plug into an earthed socket only.
When using a cable reel unwind it fully. Do not use long
extension cables.
Outdoors use
If the tool is suitable to be used outdoors, only use an
extension cable intended for outdoor use and marked
accordingly. Use a RCD (residual current device) to pro-
vide protection against electrical shock.
Do not use in rain or damp conditions.
Connect a dust extraction device
Whenever there are facilities for fitting a dust or fume
extraction system, make sure it is connected and used.
Use recommended accessories
The use of any other accessory or attachment other than
recommended in the instructions or catalogue may pre-
sent a risk of personal injury. Use an extension cable with
a minimum conductor size of 1.5mm2.
When using a cable reel unwind it fully.
OPERATION
Always observe the safety instructions and applica-
ble regulations.
CHOICE OF THE SAND-PAPER
Coarse sand-paper (grain 50) removes in general the big-
ger part of the material and fine sand-paper is used for the
finishing. If the surface is not even, then start with rough
sand-paper. Further you use middle coarse sand-
paper(grain 80) to remove the scratches left behind by
the coarse sand-paper and finally you take fine sand-
paper (grain 120) for the finishing.
REMOVING AND INSTALLING THE SAN-
DING BELT
Before assembly the sanding belt always remove
the plug from the mains.
• Put the machine on its side, with the drive belt cover
(10, Fig. A) down wards.
• Loosen the sanding belt fastener (7, Fig A).
• Remove the sanding belt from the machine
• Put a new sanding belt on the machine, make sure
that the direction arrows on the sanding belt are
pointing in the same direction as the direction indica-
tor (9, Fig. A).
• Fasten the sanding belt fastener again (7, Fig. A).
Ferm 3
SPARE PARTS LIST FBS-1000
REF NR DESCRIPTION FERM NR
007 BALL BEARING 629 Z 800629
009 ROTOR 409200
011 STATOR 409201
013 CARBON BRUSH CAP 409202
014 CARBON BRUSH SET 409203
015 CARBON BRUSH HOLDER 409204
019 SMALL BAND WHEEL 409205
020 V-BELT 409206
022 SPINDLE 409207
023 IDLE WHEEL 409208
030 NEEDLE BEARING HK081210 801211
036 SWITCH 302008
044 RUBBER FOR DRIVE WHEEL 409209
045 DRIVE WHEEL 409210
046 BALL BEARING 6800 ZZ 806800
050 + 051 ADJUSTING KNOB + SPRING 409211
053 BIG BAND WHEEL 409212
055 BALL BEARING 627 ZZ 800627
064 BALL BEARING 609 ZZ 800609
- DUSTBAG COMPLETE 409213
Especificaciones del producto
| Marca: | Ferm |
| Categoría: | lijadora |
| Modelo: | FBS-1000 |
¿Necesitas ayuda?
Si necesitas ayuda con Ferm FBS-1000 haz una pregunta a continuación y otros usuarios te responderán
lijadora Ferm Manuales
22 Septiembre 2024
16 Agosto 2024
12 Agosto 2024
31 Julio 2024
30 Julio 2024
22 Julio 2024
18 Julio 2024
15 Julio 2024
lijadora Manuales
- lijadora Bosch
- lijadora AEG
- lijadora DeWalt
- lijadora Arendo
- lijadora Silverline
- lijadora Workzone
- lijadora Ozito
- lijadora Makita
- lijadora Hitachi
- lijadora Black And Decker
- lijadora Vonroc
- lijadora Stanley
- lijadora Skil
- lijadora Hyundai
- lijadora Hilti
- lijadora Ryobi
- lijadora Festool
- lijadora Metabo
- lijadora Parkside
- lijadora Worx
- lijadora Milwaukee
- lijadora Hikoki
- lijadora Hazet
- lijadora Einhell
- lijadora Maktec
- lijadora Bort
- lijadora Powerplus
- lijadora Porter-Cable
- lijadora Topcraft
- lijadora Scheppach
- lijadora Gamma
- lijadora Matrix
- lijadora Bavaria
- lijadora Flex
- lijadora Duro
- lijadora Varo
- lijadora Max
- lijadora Truper
- lijadora Kinzo
- lijadora Cocraft
- lijadora Meister Craft
- lijadora RIDGID
- lijadora Rupes
- lijadora Proxxon
- lijadora Elu
- lijadora Global
- lijadora King Craft
- lijadora Rikon
- lijadora Duro Pro
- lijadora Alpha Tools
- lijadora Toledo
- lijadora FIXIT
- lijadora Einhell Bavaria
- lijadora Ergotools Pattfield
- lijadora McKenzie
- lijadora Proviel
- lijadora Bavaria By Einhell
- lijadora THUN
- lijadora Pevec
- lijadora Handwerk
- lijadora TAURUS Titanium
- lijadora Stalco
Últimos lijadora Manuales
27 Octubre 2024
20 Octubre 2024
19 Octubre 2024
14 Octubre 2024
14 Octubre 2024
10 Octubre 2024
8 Octubre 2024
7 Octubre 2024
6 Octubre 2024
5 Octubre 2024