Ferm FHB-940 Manual de Usario

Ferm No categorizado FHB-940

Lee a continuación 📖 el manual en español para Ferm FHB-940 (6 páginas) en la categoría No categorizado. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/6
Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com 0211/06
Ferm Wood Lathe
FHB-940
USER’S MANUAL
Art.nr. 760140
Screwfix Art.nr. 15092
UK Subject to change
Document Ref:
FHB-940/15092/PMR43/Issue 1/July 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
FERM WOOD LATHE FHB-940
USERS MANUAL
TECHNICAL SPECIFICATIONS
PRODUCT INFORMATION
A. Headstock
B. Bed tubes (b1 and b2)
C. Tailstock
E. Foot
F. Bed bolt
G. Tailstock barrel lock wheel
H. Saddle
I. Toolrest support
L/M. Tool rests
P. Faceplate
SAFETY INSTRUCTIONS
The following pictograms are used in these instructions
for use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of the
instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
Ferm products are manufactured to high quality stan-
dards, they are safe and fit for purpose at time of sale, but
all tools can be dangerous if the correct precautions are
not taken. Always follow these instructions, do not carry
out the operation until you are sure you can do so in saf-
ety. Remember to consider the work environment for
safe operation as well as safety for tool use.
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this product.
Save these instructions for future reference.
PERSONAL SAFETY
Use Personal Protection Safety Equipment
Protect eyes with safety glasses or goggles note: the use
of safety protective eyewear without the CE mark can
lead to serious injury if the lens breaks. A suitable dust
mask should be worn if cutting, drilling or sanding is
dusty, in particular chipboard or MDF.
Approved safety footwear and headgear should worn as
appropriate, for example on building works or when
heavy weights are involved. Wear suitable clothes to
protect against shavings/ debris. Wear earplugs or ear
defenders.
Dress properly
Do not wear loose clothing or jewellery. It can get caught
in moving parts. Non-skid footwear is recommended
when working out doors. Wear protective hair covering
to contain long hair.
Stay alert
Watch what you are doing. Use common sense. Do not
operate tools when tired or after taking alcohol or pre-
scription/ non-prescription drugs.
Voltage | 230 V~
Frequency | 50 Hz
Power | 370 W
Noload speed (-/min) | 480-3010
Number of speeds | 5
Headstock / |
morse taper & threaded | No.1, 3/4-16
Tailstock / morse taper | No.1
Overall dim (mm) | 375x400x308
Weight | 38 kg
2 11Ferm Ferm
EXPLODED VIEW
SPARE PARTS LIST FHB-940
REF NR DESCRIPTION FERM NR
45 V-BELT 800170
23 SWITCH 406103
3 MOTOR 406102
41 HEADSTOCK SPINDLE 406104
43 SPUR CENTRE 406105
55 QUICK-ACTING KEY 406106
57 TOOL SUPPORT HOLDER 406107
58 TOOL SUPPORT 406108
61 SREW HANDLE 406109
64 CUP CENTRE 406110
75 PUSHER 406111
10 Ferm
OPERATIONAL SAFETY
Warning! This machine can produce fine dust,
which can be harmful to your health. Always wear a
suitable dust mask and other protection equipment as
appropriate. Use dust extraction.
Concentrate
Routine and repetition can lead to mistakes. Remember
that a slight lack of concentration can result in serious
injuries in a split second.
Keep work area clean
Cluttered areas and benches invite injuries.
Consider the work environment
Do not expose power tools to rain or use them in damp
or wet locations. Keep work area well lit. Do not use
power tools in the presence of flammable liquids, vap-
ours or gases.
Guard against electric shock
This unit contains dangerous voltages. Use a RCD (resi-
dual current device) to provide protection against elec-
trical shock. Prevent body contact with grounded sur-
faces (e.g. pipes, radiator, ranges or refrigerators).
Keep children and pets away
Do not let children or pets come into contact with the
tool, extension cable or work area.
Do not force the tool
It will work better and safer at the rate for which it was
intended.
Use the right tool
Do not force small tools or attachments to do the job of a
heavy-duty tool. Do not use tools for purposes for which
they were not intended; for example do not use a circular
saw for cutting trees or logs.
Do not abuse the cable
Never carry the tool by the cable or pull it to disconnect
it from the power socket. Keep the cable away from heat,
oil and sharp edges. Do not touch the metal plug pins
when connecting or removing the plug.
Secure Work
Use clamps or a vice to hold work. It is safer than using
your hand and it frees both hands to operate the tool.
Do not over-reach
Keep a proper footing and balance at all times.
Disconnect tools from power supply
When not in use, before servicing and when changing
accessories such as bits and cutters.
Always switch off and unplug the lathe from the
power supply before making adjustments or chan-
ging the work piece.
Remove adjusting keys and wrenches
Ensure that they are removed from the tool before swit-
ching on.
Avoid unintentional starting
Do not carry plugged in tools with your finger on the
switch. Check that the switch is off before plugging in to
the socket.
Extension cables
Use only three core earthed extension cables suitable
for the power input of the tool (minimum cable size
1.5mm2). Plug into an earthed socket only.
When using a cable reel unwind it fully. Do not use long
extension cables.
Outdoors use
If the tool is suitable to be used outdoors, only use an
extension cable intended for outdoor use and marked
accordingly. Use a RCD (residual current device) to pro-
vide protection against electrical shock. Do not use in
rain or damp conditions.
Connect a dust extraction device
Whenever there are facilities for fitting a dust or fume
extraction system, make sure it is connected and used.
Use recommended accessories
The use of any other accessory or attachment other than
recommended in the instructions or catalogue may pre-
sent a risk of personal injury.
Extension cables
Use extension cables suitable for the power input of the
lathe (minimum cable size 1.5mm2, maximum cable
length 20 metres).
Only connect to an earthed socket When using a cable
reel unwind the cable fully.
Ferm 3
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
We declare under our sole responsability that this
product is in conformity with the following
standards or standardized documents
EN61029-1,
EN61000-3-2, EN61000-3-3,
EN55014-1, EN55014-2
in accordance with the regulations:
98/37EEC
73/23EEC
89/336EEC
from 26-05-1998
GENEMUIDEN NL
W. Kamphof
Quality department
CE
ı
DECLARATION OF CONFORMITY (UK)

Especificaciones del producto

Marca: Ferm
Categoría: No categorizado
Modelo: FHB-940

¿Necesitas ayuda?

Si necesitas ayuda con Ferm FHB-940 haz una pregunta a continuación y otros usuarios te responderán


No categorizado Ferm Manuales

Ferm

Ferm FCT-360L Manual de Usario

22 Agosto 2024
Ferm

Ferm LBM1010 Manual de Usario

17 Agosto 2024
Ferm

Ferm PDM1050P Manual de Usario

5 Agosto 2024
Ferm

Ferm FKE180 Manual de Usario

29 Julio 2024
Ferm

Ferm FHB-940 Manual de Usario

22 Julio 2024

No categorizado Manuales

Últimos No categorizado Manuales

POLARIS

POLARIS RZR S 1000 EPS (2018) Manual de Usario

27 Octubre 2024
Workzone

Workzone 20V Li-Ion Reciprocating Saw PT160501 Manual de Usario

27 Octubre 2024
Philips

Philips 43PUL7672 Manual de Usario

27 Octubre 2024
Manhattan

Manhattan 461504 Manual de Usario

27 Octubre 2024
Sungrow

Sungrow SG125HV Manual de Usario

27 Octubre 2024
Schneider

Schneider CCT724319 Manual de Usario

27 Octubre 2024
Technoline

Technoline WS 250 Manual de Usario

27 Octubre 2024
Livarno

Livarno IAN 354423 Manual de Usario

27 Octubre 2024
Kupper

Kupper 12152 Manual de Usario

27 Octubre 2024
JennAir

JennAir CARBON24L Manual de Usario

27 Octubre 2024