Fibaro FIBEFGDW-002-1 Manual de Usario
Fibaro
Sensor de movimiento/marco
FIBEFGDW-002-1
Lee a continuación 📖 el manual en español para Fibaro FIBEFGDW-002-1 (16 páginas) en la categoría Sensor de movimiento/marco. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/16
FIBARO DOOR/WINDOW SENSOR 2
FGDW-002
CONTENTS
#1: Description and features 3
#2: Basic activation 4
#3: Adding/removing the device 5
#4: Physical installation 6
#5: Operating the device 7
#6: Association 9
#7: Advanced parameters 10
#8: Specications 14
#9: Regulations 15
O P E R A T I N G
M A N U A L
EN
v1.1
2
Important safety information
Read this manual before attempting to install the device!
Failure to observe recommendations included in this manual
may be dangerous or cause a violation of the law. The manufacturer,
Fibar Group S.A. will not be held responsible for any loss or damage
resulting from not following the instructions of operating manual.
The alarm functionality of devices is an additional feature increasing
the comfort level of your home automation system. If you want to
use professional security service, please contact them to determine
what systems can provide a protection of your estate.
Compliance with safety standards:
The device is designed to be used in Z-wave home automation sys-
tems (e.g. FIBARO) and is complaint with IEC/UL/CSA 60950-1. In case
of the integration with another system, e.g. alarm system, it is re-
quired to verify the compliance with additional standards.
!
General information about
the FIBARO System
FIBARO is a wireless smart home automation system, based on the
Z-Wave protocol. All of available devices can be controlled through
a computer (PC or Mac), smartphone or tablet. Z-Wave devices are
not only receivers, but can also repeat the signal, increasing the
Z-Wave network’s range. It gives advantage over traditional wireless
systems that require direct link between transmitter and receiver, as
a result the construction of the building could aect network’s range
negatively.
Every Z-Wave network has its unique identication number (home
ID). Multiple independent networks can exist in the building without
interfering. Transmission security of FIBARO System is comparable to
wired systems.
Z-Wave technology is the leading solution in smart home automation.
There is a wide range of Z-Wave devices that are mutually
compatible, independently of manufacturer. It gives the system the
ability to evolve and expand over time. For more information visit
www.baro.com.
3
DESCRIPTION AND FEATURES
Main features of FIBARO Door/Window Sensor 2:
• Compatible with any Z-Wave or Z-Wave+ Controller,
• Supports protected mode (Z-Wave network Security Mode) with
AES-128 encryption,
• Door/window opening detected through separation of Sensor’s
body and a magnet,
• Built-in temperature sensor,
• Detects tampering, when detached or opened,
• Easily mounted on doors, windows, garage gates and roller blinds,
• Battery powered,
• Visual LED indicator signalling status of the device,
• 7 color variations.
FIBARO Door/Window Sensor 2 is a wireless, battery powered Hall
eect contact sensor, compatible with the Z-Wave Plus standard.
Changing the device’s status will automatically send signal to the
Z-Wave controller and associated devices.
Sensor can be used to trigger scenes and wherever there is a need
for information about opening or closing of doors, windows, garage
doors, etc. Opening is detected by separating the sensor’s body and
the magnet.
In addition the FIBARO Door/Window Sensor 2 is equipped with
a built-in temperature sensor.
#1: Description and features
FIBARO Door/Window Sensor 2
is a fully compatible Z-Wave
PLUS device.
NOTE
This device may be
used with all devices
certied with Z-Wave
Plus certicate and
should be compatible
with such devices pro-
duced by other manu-
facturers.
i
NOTE
Z-Wave Controller
must support Z-Wave
Security Mode in
order to fully utilize the
product.
i
Especificaciones del producto
| Marca: | Fibaro |
| Categoría: | Sensor de movimiento/marco |
| Modelo: | FIBEFGDW-002-1 |
¿Necesitas ayuda?
Si necesitas ayuda con Fibaro FIBEFGDW-002-1 haz una pregunta a continuación y otros usuarios te responderán
Sensor de movimiento/marco Fibaro Manuales
2 Septiembre 2024
28 Agosto 2024
25 Agosto 2024
25 Agosto 2024
23 Agosto 2024
23 Agosto 2024
23 Agosto 2024
23 Agosto 2024
21 Agosto 2024
21 Agosto 2024
Sensor de movimiento/marco Manuales
- Sensor de movimiento/marco Abus
- Sensor de movimiento/marco Hikvision
- Sensor de movimiento/marco Nedis
- Sensor de movimiento/marco Caliber
- Sensor de movimiento/marco Vivanco
- Sensor de movimiento/marco Ezviz
- Sensor de movimiento/marco EMOS
- Sensor de movimiento/marco Optex
- Sensor de movimiento/marco Axis
- Sensor de movimiento/marco Hama
- Sensor de movimiento/marco Techly
- Sensor de movimiento/marco Steren
- Sensor de movimiento/marco Olympia
- Sensor de movimiento/marco Kidde
- Sensor de movimiento/marco Konig
- Sensor de movimiento/marco Xavax
- Sensor de movimiento/marco X4-Tech
- Sensor de movimiento/marco Marmitek
- Sensor de movimiento/marco Nexa
- Sensor de movimiento/marco Satel
- Sensor de movimiento/marco Homematic IP
- Sensor de movimiento/marco Avidsen
- Sensor de movimiento/marco ORNO
- Sensor de movimiento/marco Kanlux
- Sensor de movimiento/marco Schwaiger
- Sensor de movimiento/marco Inovonics
- Sensor de movimiento/marco Tellur
- Sensor de movimiento/marco Sonoff
- Sensor de movimiento/marco Gewiss
- Sensor de movimiento/marco Setti+
Últimos Sensor de movimiento/marco Manuales
14 Octubre 2024
6 Octubre 2024
4 Octubre 2024
19 Septiembre 2024
19 Septiembre 2024
18 Septiembre 2024
18 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024
17 Septiembre 2024