Fiio UTWS5 Manual de Usario

Lee a continuación 📖 el manual en español para Fiio UTWS5 (5 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/5
快速入门指
Quick Start Guide
型号:UTWS5
Instructions for multifunction button of the earhook
Instructions for multifunction button of the charging case & indicator
light
(Notes: Before using, please tear the insulated gummed paper off on the metal contact of the
earhook.)
Triple click: Activate voice assistant
L
R
Long press: Next track, hang up, decline
a call
Double click: Pause
Single click: Resume playback,
decrease volume, answer a call
Long press: Previous track, hang
up, decline a call
Left and right earhooks are fully
charged: White light keeps
constantly on for about 15s before
going off. (The indicator light will
stay ON if the charging case (case
lid closed) is connected to a USB
or if the earhooks are charged with
the case lid opened.)
Remaining power indication (indicates
when opening the case every time.)
21%~100%: White light constantly on for 5s
20%~0%: Red light constantly on for 5s.
Double click: Pause
Operation instructions for the multifunction
button of the charging case:
Enter pairing state: Long press the
multifunction button for about 3s;
Reset: Long press the multifunction button for
about 12s;
Short press: Display the remaining power of
the charging case.
Charging case status indication:
Charging: White light pulses (case lid
closed);
Fully charged: White light constantly on (case
lid closed).
Earhook (in the case) status indication:
Pairing: Red&white light flash alternately.
Triple click: Activate voice assistant
Single click: Resume playback,
increase volume, answer a call
Notes:
1) When the charging case is opened, the earhooks will power on and enter the
pairing/reconnecting state, which means they can be searched for and connected to.
2) After taking the 2 earhooks out of the charging case and then putting them back,
they will enter the charging state. The corresponding indicator light of the charging
case indicates the charging state of each earkook.
3) When opening the case, the middle indicator light will indicate the remaining
power of the charging case.
Power on
1) When opening the charging case, the UTWS5 will turn on automatically. (The one
never been connected will auto-enter pairing state when powering on for the first
time.)
2) If the UTWS5 is outside the charging case (off state), hold the multifunction button
for about 1s to turn it on. After being turned on, it can automatically reconnect to the
last-connected device.
Power off
If the UTWS5 is outside the case (on state), hold the multifunction button for about 5s
to turn it off. Or to turn it off in the Settings menu of the FiiO Control APP.
Pairing mode
1) If the UTWS5 is inside the charging case, it can enter pairing state by pressing the
multifunction button on the case for about 3s after opening the case.
2) If the UTWS5 is outside the case, it can enter pairing state by corresponding
operation in the Settings menu of the FiiO Control APP.
(Note: When the charging case is opened over 3 minutes, the UTWS5 will no longer
respond to any commands of the multifunction button of the case. So please keep the
UTWS5 in the case and operate it within valid time.)
Factory data reset/Bluetooth pairing
Charging port of the charging case

Especificaciones del producto

Marca: Fiio
Categoría: No categorizado
Modelo: UTWS5

¿Necesitas ayuda?

Si necesitas ayuda con Fiio UTWS5 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Fiio Manuales

Fiio

Fiio PL50 Manual de Usario

16 Septiembre 2024
Fiio

Fiio Q15 Manual de Usario

10 Septiembre 2024
Fiio

Fiio UTWS5 Manual de Usario

1 Septiembre 2024

No categorizado Manuales

Últimos No categorizado Manuales