Finlux ID-F510 Manual de Usario

Lee a continuación 📖 el manual en español para Finlux ID-F510 (6 páginas) en la categoría radio reloj. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/6
E-2
iPod/ iPhone DOCKING HIGH FIDELITY
SPEAKER SYSTEM
WITH FM PLL RADIO TUNER
AND ALARM CLOCK
OPERATING INSTRUCTIONS
WARNIN G : To redu c e
the risk of electric shock, do
not remove cover (or back).
N o u s e r - s e r v i c e a b l e
p a r t s i n s i d e . R e f e r
s e rv i c i n g t o q u a l i f i e d
service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
T h e e x c l a m a t i o n
p o i n t w i t h i n t h e
triangle is a warning
sign alerting you of
important instructions
accompanying the
product.
The lightning flash
a n d a r r o w h e a d
within the triangle
i s a w a r n i n g
sign alerting you of
"dangerous voltage"
inside the product.
NOTE: CAUTION SYMBOLS ARE PRINTED ON THE BOTTOM OF UNIT.
PLEASE REFER TO INSTRUCTION MANUAL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING LIQUIDS.
CAUTION: GROUNDING OR POLARIZATION. THE PRECAUTIONS
SHOULD BE TAKEN SO THAT THE WIDER BLADE OF THE AC PLUG
MUST MATCH THE SLOT IN RECEPTACLE "WALL SOCKET".
MODEL: iP-3-AFP
WHEN ELECTROSTATIC DISCHARGE (ESD) OCCURS AT THE FRONT SURFACE (WHETHER
METAL OR PLASTIC) OR NEAR ANY PART OR ANY BUTTON OF THIS UNIT, OR AT THE USB
PORT AND/ OR SD-CARD SLOTS (IF THEY EXIST ON THIS PRODUCT),
THERE MAY BE A POSSIBILITY THAT THE PRODUCT MAY STOP OPERATION AND/ OR
SHUT DOWN IMMEDIATELY. THIS IS A NORMAL CONDITION AND INTENDED TO PROTECT
THE UNIT AND INTERNAL COMPONENTS AGAINST DAMAGE.
IN SUCH A CASE, PLEASE RESET THE UNIT (BY DISCONNECTING AND RECONNECTING
AC-POWER SOURCE) TO REVERT THE UNIT TO NORMAL OPERATION.
ELECTROSTATIC DISCHARGE (ESD) PRECAUTION
BATTERY SHOULD NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE,
FIRE OR THE LIKE.
THE APPARATUS SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS
FILLED WITH LIQUIDS SHOULD BE PLACED ON THE APPARATUS.
THE MARKING AND RATING LABEL IS LOCATED AT BOTTOM ENCLOSURE OFTHE APPARATUS.
THE MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN READILY
OPERABLE. TO BE COMPLETELY DISCONNECTED THE POWER INPUT, THE MAINS PLUG
OF THE APPARATUS SHALL BE DISCONNECTED FROM THE MAINS COMPLETELY.
THE MAINS PLUG SHOULD NOT BE OBSTRUCTED OR SHOULD BE EASILY ACCESSED
DURING INTENDED USE.
UNDER THE INFLUENCE OF ELECTROSTATIC PHENOMENON,
THE PRODUCT MAY MALFUNCTION AND USER TO POWER RESET.
CAUTION
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE.
MODEL iP-3-AFP
ENGLISH MANUAL PLAN
SIZE: 102(W) x 136(H) MM
MATERIAL: 80G WOODFREE PAPER
PRINTING COLOR: BLACK
E-4
E-3
LOCATION OF CONTROLS
1. LED DISPLAY
2. SPEAKER
3. BACK-UP BATTERY
COMPARTMENT (BOTTOM OF UNIT)
4. CAVITY FOR DOCK ADAPTOR
5. ON/ STANDBY KEY
6. PLAY/ PAUSE KEY
7. FUNCTION/ CL. SET
8. SEARCH - / SKIP - KEY
9. SEARCH + / SKIP + KEY
10. AL-MODE/ AL-SET KEY
11. EQ/ SLEEP KEY
12. MEMORY KEY
13. VOL. - KEY
14. VOL. + KEY
15. SNOOZE/ DIMMER KEY
16.
17. DC JACK (DC 7V )
18.
iPod/ iPhone STAND BOARD
FM ANTENNA WIRE
AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)
- THIS SET IS EQUIPPED WITH A "DC-JACK" CAPABLE OF ACCEPTING
AC-ADAPTORS WITH A RATING OF DC = 7V, 2A, AND WITH A PLUG
WITH THE FOLLOWING POLARITIES AS SHOWN (CENTER POSITIVE) :
- PLEASE USE ONLY THE SUPPLIED AC-ADAPTOR TO OPERATE THE UNIT.
USE OF OTHER ADAPTORS MAY DAMAGE THE UNIT OR CAUSE IT TO MALFUNCTION.
- PLUG THE TAIL END OF THE AC-ADAPTOR INTO THE DC-JACK (SOCKET)
ON THE REAR OF THE UNIT.
- INSERT THE PLUG OF THE AC-ADAPTOR INTO A WALL OUTLET WITH AC-POWER.
- PRESS THE "ON/ OFF" KEY TO SWITCH ON THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED "OFF".
IT WILL EITHER BE "ON" OR IN "STANDBY MODE".
- IN STANDBY MODE, THE BLUE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE DIMMED
BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).
- ANYTIME DURING STANDBY MODE, YOU CAN SWITCH "ON" THE UNIT BY PRESSING
THE "ON/ OFF" KEY.
- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE WHEN NOT IN USE.
POWER SUPPLY
- - -
-
-
-
--
-
-
--
-
-
-
FRONT VIEW:
BACK VIEW:
1
TOP VIEW:
3
- OPEN THE BATTERY DOOR AT THE BOTTOM OF UNIT.
- INSERT 2 PCS "AAA-CELL" (UM-4/LR03 TYPE) BATTERIES IN THE BATTERY
COMPARTMENT.
THESE 2 BATTERIES ARE FOR BACKUP OF THE "CLOCK" DURING BRIEF POWER
OUTAGES".
BACK UP BATTERIES
-
-
-
--
+
+
+
++
DIMMER FUNCTION
THIS SET HAS A DIMMER FUNCTION TO ADJUST THE BRIGHTNESS LEVEL
OF THE DISPLAY BACKLIGHT. SIMPLY ADJUST IT AS DESIRED BY PRESSING
THE SNOOZE/ DIMMER KEY REPEATEDLY
TO REDUCE EYE STRAIN, AND TO
(HI-DIMMER / LOW-DIMMER / OFF.)
SAVE ENERGY.
THE DISPLAY BACKLIGHT WILL ALWAYS RETURN IN HI-DIMMER AFTER RESET THE UNIT.
2
5
4
6
7
8
9
10
11
12
13
14
15
18
17
16
E-6
DIGITAL CLOCK FUNCTION
- THE SET HAS A BUILT-IN DIGITAL CLOCK, WHEN THE SET IS IN "STANDBY MODE".
(THE DISPLAY WILL CONTINUOUSLY SHOW THE CURRENT TIME).
HOW TO SET CORRECT TIME:
CORRECT TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY.
SWITCH UNIT TO "STAND-BY" MODE
PRESS & HOLD FUNC./ CL-SET KEY FOR 3 SECONDS DISPLAY SHOWS
HOUR OR HOUR (FLASHING)
12H 24H
PRESS SKIP- / SEARCH- OR SKIP+/SEARCH+ KEY TO SELECT
12-HOUR OR 24-HOUR CLOCK DISPLAY SYSTEM & PRESS
O CONFIRM YOUR SELECTION
FUNC./CL-SET KEY
T
PRESS REPEATEDLY TO
SET THE CORRECT IN THE DISPLAY & PRESS
TO CONFIRM
SKIP- / SEARCH- OR SKIP+ /SEARCH+ KEY
FUNC./ CL-SET KEYMINUTE
PRESS REPEATEDLY TO
SET THE CORRECT IN THE DISPLAY & PRESS
TO CONFIRM
SKIP- / SEARCH- OR SKIP+ /SEARCH+ KEY
FUNC./ CL-SET KEYHOUR
E-5
ALARM FUNCTION
- THIS SET IS EQUIPPED WITH 3 ALARM MODES: BUZZER, RADIO AND iPod.
BEFORE SETTING THE ALARM, MAKE SURE TO SET THE CLOCK (SEE "DIGITAL
CLOCK FUNCTION" IN THE PERVIOUS SECTION) .
PREPARE FOR THE ALARM SETTINGS
PRESS THE KEY TO SWITCH ON THE SET (DISPLAY BLUE LIGHT WILL
BE "ON").
ON/ STANDBY
1. PRESS THE KEY TO PUT THE SET INTO "STANDBY" MODE .
2. PRESS AND HOLD KEY UNTIL
THE DISPLAY WILL NOW SHOW:
3. PRESS SKIP- / SEARCH- AND SKIP+ /SEARCH+ KEY TO REACH THE HOUR
OF THE DESIRED WAKE UP TIME THEN PRESS KEY TO CONFIRM.
THE DISPLAY WILL NOW SHOW:
ON/STANDBY
AL-SET/ AL-MODE
AL-SET/ AL-MODE
0 00
HOUR (FLASHING)
MINUTES
(FLASHING)
8 00
4. PRESS SKIP- / SEARCH- AND SKIP+ /SEARCH+ KEY TO REACH THE
MINUTES OF THE DESIRED WAKE UP TIME, THEN PRESS THE
KEY TO CONFIRM.
AL-SET/ AL-MODE
"ALARM" TIME SETTING
ONCE THE DESIRED SOURCE HAS BEEN READY, PRESS THE ON/ STANDBY KEY TO
PUT THE SET INTO STANDBY MODE AND THEN SHORT PRESS THE AL-SET/ AL-MODE KEY
REPEATEDLY TO SELECT THE SOURCE AS DESIRED.
5. "ALARM" MODE SETTING
NOW SELECT THE SOURCE THAT YOU WISH THE UNIT TO PLAY AT THE "WAKE UP"
TIME AS BELOW:
PRESS THE KEY TO SWITCH ON THE SET (DISPLAY BLUE LIGHT WILL
BE "ON").
1. CONNECT THE iPod/ iPhone AS DESCRIBED.
THE
TUNE IN THE DESIRED STATION.
2. ADJUST THE VOLUME LEVEL AS DESIRED BY PRESSING OR
KEY.
ON/ STANDBY
:
:
VOL. UP + VOL. DN -
FOR iPod/ iPhone
FOR RADIO
SELECT THE SONG OR THE DESIRED PLAYLIST TO PLAY AT
“WAKE UP TIME.
START AND PAUSE PLAYBACK OF THE SONG/PLAYLIST AT
THE POINT FROM WHICH YOU WANT PLAYBACK TO BEGIN
AT THE “WAKE UP TIME.
*REMARK: = BUZZER ALARM / = RADIO / = iPod/ iPhone
AL FM iPod
AL
AL

Especificaciones del producto

Marca: Finlux
Categoría: radio reloj
Modelo: ID-F510

¿Necesitas ayuda?

Si necesitas ayuda con Finlux ID-F510 haz una pregunta a continuación y otros usuarios te responderán




radio reloj Finlux Manuales

radio reloj Manuales

Últimos radio reloj Manuales