Flashforge Creator 3D Manual de Usario

Lee a continuación 📖 el manual en español para Flashforge Creator 3D (31 páginas) en la categoría Impresora 3D. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/31
2
Contents
4
Secon 1: the Box?What’s Included in
5
Secon 2: Unboxing
8
Secon 3: Inial Hardware Installaon
11
Secon 4: Soware Installaon
17
Secon 5: USB Connecon & Temperature Seng
22
Secon 6: Filament
22
Installing the Filament
23
Feeding the Filament Using LCM Screen
24
Withdrawing the Filament Using LCM Screen
25
Seng the Parameter
26
Inial Print
28
Dual Extruder Print
3
WARNING:
Prior to powering on the Creator, make sure the power supply switch is set
to 115v if you are located in the United States. For other countries, please
refer to your country standards. Failure to do so will damage the
motherboard. For instrucons on how to do this, please refer to page 8.
Precauon s:
Please make sure to read this page carefully prior to seng up and operang the Creator.
The Creator is very sensive to stac electricity, so please make sure you contact a grounded
object before operang the machine.
efore repairing or making any alteraons to the Creator, it is essenal that the machine is B
turned o, and the power cord is unplugged.
he Creator operates at very high temperature; allow the nozzle, extruded plasc and heang Ta
plate to cool before touching.
ome plasc laments may give o a slight odor when heated. Because of this, the machine S
should always operate in a well-venlated area.
o not wear gloves when operang or repairing, as entanglement may occur and cause injury. D
o not leave the machine unaended when in operaon. D

Especificaciones del producto

Marca: Flashforge
Categoría: Impresora 3D
Modelo: Creator 3D

¿Necesitas ayuda?

Si necesitas ayuda con Flashforge Creator 3D haz una pregunta a continuación y otros usuarios te responderán