Fredenstein Bento 10 DS Manual de Usario
Fredenstein
Maquina de efectos
Bento 10 DS
Lee a continuación 📖 el manual en español para Fredenstein Bento 10 DS (9 páginas) en la categoría Maquina de efectos. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/9
Bento 10 DS
Module Carrier
Operating Manual
Fredenstein Bento 10 DS Module Carrier
The Fredenstein Bento 10 DS is the most advanced module carrier for ten Fredenstein Series 600
modules or API-500 compatible plug-in cards in 3U 19 inch rack-mount format. The Bento 10 DS
features several important upgrades compared with third party products:
the color LCD Display and a rotary encoder:
to set routing and other parameters with non-volatile storage. In addition, if certain Fredenstein
modules are used, like the F600A, F601A, F602, F603A/B, and the F607, all operating parameters
of theses modules are displayed as well.
Universal power supply:
accepting mains voltages from 90V AC to 240V AC, 50 to 60 Hz.
Increased output currents: 6A or 600 mA per slot and +48V DC 0.25A
Monitoring of output voltages and currents.
Auxiliary Audio Inputs and Outputs
Built-in Audio Routing:
Modules can be daisy-chained by simply using the menu driven user interface on the LCD.
Built-in compatibility switches for non-conforming modules.
Compressor buss linking:
Compressor modules can be linked simply using the menu driven user interface on the LCD as well.
Multi-layer back-plane:
Increased signal integrity and lower noise floor.
Ground-lift :
In case of ground loops, the audio ground and the protective ground can be disconnected. Please use
only if absolutely necessary.
Installation:
Electrical Safety Warnings:
Do not open the enclosure, hazardous voltages are present inside!
There are no user serviceable parts inside.
Always disconnect the mains cord before installing or removing modules!
If you need to replace the mains fuse, make sure the replacement has the same
rating ( 3.15 AT).
Please disconnect the mains from your Bento 10 DS before installing or removing modules. Make
sure each installed module is well seated in the receiving connector and the module is secured by
fasten the two mounting screws (size: M3).
Front View:
Fredenstein Bento 10 DS Manual V1.0 Sep 25, 2017 Page 1
Fredenstein Bento 10 DS Module Carrier
If certain non-Fredenstein modules are used, which bridge several pins on the connector and
connected the contacts on the top and button side, the double switches, located directly besides the
slot connectors, can both be turned off (lower position) to avoid interference between the module
and the digital interconnect. For Fredenstein modules, both need to be in the ON (upper) position.
To rack-mount the unit, the four feet have to be removed by their center screws.
Operation:
After installation of the modules, connect the mains cord to the Bento 10 DS IEC socket located on
the back-panel and than connect the mains cable to a grounded outlet. Now turn the Bento 10 DS on
by operating the I/O switch (also part of the IEC socket on the back). The following screen will be
displayed indicating the status and power-supply voltages and currents.
Now the Bento 10 DS is ready and will display any request from
certain Fredenstein modules. The Bento 10 DS will continuously
monitor the power-supplies and display the voltages and currents.
To enter the setup menu, please push the wheel and the setup menu
will appear.
Configuration of audio linking
Configuration of compressor buss linking
Various Setting
Save Configuration
Recall Configuration
Turning the wheel left or right to scroll from one menu point to the next, the highlighted menu point
will get selected when the wheel is pushed. Selecting Exit and pushing the wheel will show the
Status screen again.
Fredenstein Bento 10 DS Manual V1.0 Sep 25, 2017 Page 2
Especificaciones del producto
| Marca: | Fredenstein |
| Categoría: | Maquina de efectos |
| Modelo: | Bento 10 DS |
¿Necesitas ayuda?
Si necesitas ayuda con Fredenstein Bento 10 DS haz una pregunta a continuación y otros usuarios te responderán
Maquina de efectos Fredenstein Manuales
29 Julio 2024
Maquina de efectos Manuales
- Maquina de efectos Manta
- Maquina de efectos BeamZ
- Maquina de efectos Velleman
- Maquina de efectos American DJ
- Maquina de efectos Adj
- Maquina de efectos Behringer
- Maquina de efectos NGS
- Maquina de efectos Valcom
- Maquina de efectos Elation
- Maquina de efectos Valueline
- Maquina de efectos Chauvet
- Maquina de efectos Showtec
- Maquina de efectos Eurolite
- Maquina de efectos Monoprice
- Maquina de efectos Elysia
- Maquina de efectos HQ Power
- Maquina de efectos Antari
- Maquina de efectos Stairville
- Maquina de efectos Black Lion Audio
- Maquina de efectos Laserworld
- Maquina de efectos Martin
- Maquina de efectos ColorKey
- Maquina de efectos Evo-Lite
- Maquina de efectos Blizzard
- Maquina de efectos Cameo
- Maquina de efectos Sagitter
- Maquina de efectos DJPower
- Maquina de efectos Lotronic
- Maquina de efectos Lexicon
- Maquina de efectos Futurelight
- Maquina de efectos The Confetti Maker
- Maquina de efectos Eliminator Lighting
- Maquina de efectos Klark Teknik
- Maquina de efectos Lab Gruppen
- Maquina de efectos TCM FX
- Maquina de efectos Magmatic
- Maquina de efectos Technical Pro
- Maquina de efectos Rosco
- Maquina de efectos Showven
Últimos Maquina de efectos Manuales
18 Octubre 2024
10 Octubre 2024
8 Octubre 2024
6 Octubre 2024
3 Octubre 2024
2 Octubre 2024
2 Octubre 2024
1 Octubre 2024
30 Septiembre 2024
29 Septiembre 2024