Fujitsu AOT90TP Manual de Usario

Fujitsu Acondicionador de aire AOT90TP

Lee a continuación 📖 el manual en español para Fujitsu AOT90TP (15 páginas) en la categoría Acondicionador de aire. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/15

KEEP THIS OPERATION MANUAL

FOR FUTURE REFERENCE

FUJITSU GENERAL LIMITED P/N9365350010

Indoor Unit

ART90EL(3)

ART90TL(3)

Outdoor Unit

AOT90EP(3)

AOT90TP(3)

OPERATING MANUAL

AIR CONDITIONER

DUCT TYPE

CONTENTS

●Do not attempt to install this air conditioner by yourself.

●This unit contains no user-serviceable parts. Always consult authorized service per-

sonnel for repairs.

●When moving, consult authorized service personnel for disconnection and installa-

tion of the unit.

●Do not become over-exposed to cold air by staying in the direct path of the air flow of

the air conditioner for extended periods of time.

●Do not insert fingers or objects into the outlet port or intake grilles.

●Do not start and stop air conditioner operation by turning off the electrical breaker

and so on.

●In the event of a malfunction (burning smell, etc.), immediately stop operation, turn

off the electrical breaker, and consult authorized service personnel.

●Provide occasional ventilation during use.

●Do not direct air flow at fireplaces or heating apparatus.

●Do not climb on, or place objects on, the air conditioner.

●Do not expose the air conditioner directly to water.

●Do not operate the air conditioner with wet hands.

●Turn off power source when not using the unit for extended periods.

●Always turn off the electrical breaker whenever cleaning the air conditioner or chang-

ing the air filter.

●Connection valves become hot during Heating; handle with care.

●Check the condition of the installation stand for damage.

●Do not place animals or plants in the direct path of the air flow.

●When restarting after a long period of disuse in the winter, do:

Turn the power switch on at least 12 hours before starting the unit.

●Do not drink the water drained from the air conditioner.

●Do not use in applications involving the storage of foods, plants or animals, precision

equipment, or art works.

●Do not apply any heavy pressure to radiator fins.

●Operate only with air filters installed.

●Do not block or cover the intake grille and outlet port.

●Ensure that any electronic equipment is at least one metre away from either the in-

door or outdoor units.

●Avoid installing the air conditioner near a fireplace or other heating apparatus.

●Whe

n installing the indoor and outdoor unit, take precautions to prevent access to infan

ts.

●Do not use inflammable gases near the air conditioner.

CAUTION!

DANGER!

SAFETY PRECAUTIONS

●Before using the appliance, read these “PRECAUTIONS” thoroughly and operate in the correct way.

●The instructions in this section all relate to safety; be sure to maintain save operating conditions.

●“DANGER”, “WARNING” and “CAUTION” have the following meanings in these instructions:

WARNING!

CAUTION!

This mark indicates procedures which, if improperly performed, are most likely to

result in the death of or serious injury to the user or service personnel.

This mark indicates procedures which, if improperly performed, might lead to the

death or serious injury of the user.

This mark indicates procedures which, if improperly performed, might possibly result

in personal harm to the user, or damage to property.

DANGER!

SAFETY PRECAUTIONS ....................................... 1

NAME OF PARTS ................................................... 2

PREPARATION ....................................................... 3

OPERATION ........................................................... 3

TIMER OPERATION (OFF TIMER/ON TIMER) ...... 4

TIMER OPERATION (WEEKLY TIMER) ................. 5

ENERGY SAVE OPERATION ............................... 10

SYSTEM OPERATION ......................................... 11

CARE AND MAINTENANCE ............................... 11

OPERATION DETAILS .......................................... 12

ERRORS AND SELF DIAGNOSIS ....................... 13

TROUBLESHOOTING .......................................... 13

°C

NON STOP

CLOCK

TEMP

AUTO

TIMER

MODE

SET

ZONE

START/STOP

CLOCK ADJUST

SET TIME TEMP./DAY FAN

CONTROL

MASTER

CONTROL

HIGH

COOL

DEFROST TEST

DAY OFF

ENERGY SAVE

°C

NON STOP

CLOCK

TIMER

NEXT DAY

DAY

TEMP.

OFFON

TIMER

WEEKLY

AUTO

OFF

DAY OFF

HIGH

MED

LOW

AUTO

HEAT

FAN

COOL

DEFROST TEST

B 80

C 9 7

H I

MNOP

NAME OF PARTS

Fig. 1 Fig. 2

Fig. 3

●For explanatory purposes, the figure showing the remote

controller display shows all possible displays. The actual

display shows only that area that is being adjusted or used.

Fig. 4 Display

Fig. 1 Indoor Unit

1Outlet Port

2Intake Port

3Drain Pipe (Main)

4Drain Pipe (Safety)

Fig. 2 Outdoor Unit

5Air intake

6Air outlet

Fig. 3 Remote Controller

7START/STOP Button

8Operation Lamp

9ENERGY SAVE Button

0DAY OFF Button

AENERGY SAVE Lamp

BZONE Control Button

CSET Button

DZONE Control Lamp

ECLOCK ADJUST Button

FTIMER MODE Button

GSET TIME Button

HSET TEMP./DAY Button

#IFAN CONTROL Button

JMASTER CONTROL Button

KRemote Controller Display

(Fig. 4)

LTimer Mode Display

MClock Display (CLOCK/TIMER)

NSet Temperature Display

(TEMP.)

#OFan Speed Display

POperation Mode Display

QDEFROST Display

RTEST Display

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).

●Install this with the power sup-

ply chain during on-site instal-

lation.

#NOTE:

This model does not have a fan speed

function. (I, O)

Electrical Breaker

Especificaciones del producto

Marca:	Fujitsu
Categoría:	Acondicionador de aire
Modelo:	AOT90TP
Color del producto:	Zwart
Peso.:	630 g
Ancho:	122 mm
Profundidad:	48 mm
Altura:	158 mm
Material de la carcasa:	Metaal
Fuente-de-alimentación:	DC/PoE
Código de seguridad internacional (IP):	IP30
Indicadores LED:	Ja
Actual:	2 A
Guía de inicio rápido:	Ja
Consumo de energía (máx.):	6.2 W
Certificación:	FCC\nIEC 60068-2-27\nIEC 60068-2-32\nIEC 60068-2-6\nIEC 61000-4-2\nIEC 61000-4-4\nIEC 61000-4-5
Certificados de sostenibilidad:	CE
Voltaje de entrada:	48 - 56 V
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Estándar de red:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x
Montaje en bastidor:	Nee
Cumplimiento de la sostenibilidad:	Ja
Tiempo medio entre fallos (MTBF):	510304 uur
Alimentación a través de Ethernet (PoE):	Ja
Capacidad de conmutación:	20 Gbit/s
Dirección MAC:	11000 entries
soporte 10G:	Nee
Gestión del flujo de datos:	Ja
Tipo de interruptor:	Unmanaged
Número de puertos Ethernet RJ-45 de conmutación básica:	10
Número de puertos Gigabit Ethernet (cobre):	10
Tipo de conmutación básica de puertos Ethernet RJ-45:	Gigabit Ethernet (10/100/1000)
Almacenamiento de búfer de paquetes:	2 MB
Compatibilidad con tramas gigantes:	Ja
Duplex completo:	Ja
Tecnología de cableado Ethernet de cobre:	10BASE-T, 100BASE-TX, 1000BASE-T
Autonegociación:	Ja
voltaje-de-entrada-de-CA:	100 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Temperatura de funcionamiento (TT):	-40 - 75 °C
Presupuesto total de alimentación a través de Ethernet (PoE):	360 W
Número de puertos Power over Ethernet plus (PoE+):	4
Velocidad de envío:	8.9 Mpps
Marcos gigantes:	10000
Montaje en carril DIN:	Ja
almacenamiento y reenvio:	Ja
Función de envejecimiento automático de la dirección MAC:	Ja
Función de autoaprendizaje de dirección MAC:	Ja
Número de puertos SFP combinados:	2
Número de puertos Power over Ethernet 4PPoE (PoE++):	4