Fujitsu Intel Pentium Dual Core E2160 Manual de Usario

Fujitsu Procesador Intel Pentium Dual Core E2160

Lee a continuación 📖 el manual en español para Fujitsu Intel Pentium Dual Core E2160 (104 páginas) en la categoría Procesador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/104

Document Number: 316981-005

Intel® Pentium® Dual-Core Desktop

Processor E2000Δ Series

Datasheet

March 2008

2 Datasheet

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR

OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS

OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING

TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE,

MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. INTEL PRODUCTS ARE NOT

INTENDED FOR USE IN MEDICAL, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS.

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for

future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

ΔIntel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across different

processor families. See http://www.intel.com/products/processor_number for details. Over time processor numbers will increment based on changes in

clock, speed, cache, FSB, or other features, and increments are not intended to represent proportional or quantitative increases in any particular

feature. Current roadmap processor number progression is not necessarily representative of future roadmaps. See www.intel.com/products/

processor_number for details.

Intel® 64 requires a computer system with a processor, chipset, BIOS, operating system, device drivers, and applications enabled for Intel 64. Processor

will not operate (including 32-bit operation) without an Intel 64-enabled BIOS. Performance will vary depending on your hardware and software

configurations. See http://www.intel.com/technology/intel64/index.htm for more information including details on which processors support Intel 64, or

consult with your system vendor for more information.

Enabling Execute Disable Bit functionality requires a PC with a processor with Execute Disable Bit capability and a supporting operating system. Check

with your PC manufacturer on whether your system delivers Execute Disable Bit functionality.

The Intel® Pentium® Dual-Core Desktop processor E2000 series may contain design defects or errors known as errata which may cause the product to

deviate from published specifications.

Not all specified units of this processor support Thermal Monitor 2, Enhanced HALT State and Enhanced Intel SpeedStep® Technology. See the Processor

Spec Finder at http://processorfinder.intel.com or contact your Intel representative for more information.”

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Intel, Pentium, Intel SpeedStep, Intel Core, and the Intel logo are trademarks of Intel Corporation in the U.S. and other countries.

*Other names and brands may be claimed as the property of others.

Datasheet 3

Contents

1 Introduction ..............................................................................................................9

1.1 Terminology .......................................................................................................9

1.1.1 Processor Terminology ............................................................................ 10

1.2 References ....................................................................................................... 11

2 Electrical Specifications ........................................................................................... 13

2.1 Power and Ground Lands.................................................................................... 13

2.2 Decoupling Guidelines........................................................................................ 13

2.2.1 VCC Decoupling ..................................................................................... 13

2.2.2 Vtt Decoupling ....................................................................................... 13

2.2.3 FSB Decoupling...................................................................................... 14

2.3 Voltage Identification......................................................................................... 14

2.4 Market Segment Identification (MSID) ................................................................. 16

2.5 Reserved, Unused, and TESTHI Signals ................................................................ 16

2.6 Voltage and Current Specification ........................................................................ 17

2.6.1 Absolute Maximum and Minimum Ratings .................................................. 17

2.6.2 DC Voltage and Current Specification ........................................................ 19

2.6.3 Vcc Overshoot ....................................................................................... 21

2.6.4 Die Voltage Validation............................................................................. 22

2.7 Signaling Specifications...................................................................................... 22

2.7.1 FSB Signal Groups.................................................................................. 23

2.7.2 CMOS and Open Drain Signals ................................................................. 24

2.7.3 Processor DC Specifications ..................................................................... 25

2.7.3.1 GTL+ Front Side Bus Specifications ............................................. 26

2.8 Clock Specifications ........................................................................................... 28

2.8.1 Front Side Bus Clock (BCLK[1:0]) and Processor Clocking ............................ 28

2.8.2 FSB Frequency Select Signals (BSEL[2:0])................................................. 28

2.8.3 Phase Lock Loop (PLL) and Filter .............................................................. 29

2.8.4 BCLK[1:0] Specifications (CK505 based Platforms) ..................................... 29

2.8.5 BCLK[1:0] Specifications (CK410 based Platforms) ..................................... 31

2.9 PECI DC Specifications ....................................................................................... 32

3 Package Mechanical Specifications .......................................................................... 33

3.1 Package Mechanical Drawing............................................................................... 33

3.2 Processor Component Keep-Out Zones................................................................. 37

3.3 Package Loading Specifications ........................................................................... 37

3.4 Package Handling Guidelines............................................................................... 37

3.5 Package Insertion Specifications.......................................................................... 38

3.6 Processor Mass Specification............................................................................... 38

3.7 Processor Materials............................................................................................ 38

3.8 Processor Markings............................................................................................ 38

3.9 Processor Land Coordinates ................................................................................ 39

4 Land Listing and Signal Descriptions ....................................................................... 41

4.1 Processor Land Assignments ............................................................................... 41

4.2 Alphabetical Signals Reference ............................................................................ 64

5 Thermal Specifications and Design Considerations .................................................. 73

5.1 Processor Thermal Specifications ......................................................................... 73

5.1.1 Thermal Specifications ............................................................................ 73

5.1.2 Thermal Metrology ................................................................................. 77

5.2 Processor Thermal Features................................................................................ 77

5.2.1 Thermal Monitor..................................................................................... 77

Especificaciones del producto

Marca:	Fujitsu
Categoría:	Procesador
Modelo:	Intel Pentium Dual Core E2160
Peso.:	- g
Ancho:	1100 mm
Profundidad:	400 mm
Altura:	480 mm
Amable:	Vaste vloerstandaard
Método de montaje:	Vloer
Capacidad máxima de peso:	60 kg
Tamaño máximo de pantalla:	47 "
Tamaño mínimo de pantalla:	- "
Número de estantes incluidos:	3