Fun Generation USB Mix 3 Manual de Usario

Fun Generation Equipo de DJ USB Mix 3

Lee a continuación 📖 el manual en español para Fun Generation USB Mix 3 (16 páginas) en la categoría Equipo de DJ. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/16
EHD9 eZ.HD Series 30
720p Analog High Denion True Day/Night
Outdoor IR Dome Vandal Camera
User’s Manual
Copyright © EverFocus Electronics Corp,
Release Date: Nov., 2014
2
Precauons
1. Do not install the camera near electric or magnec elds. Install the camera away from
TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the
electromagnetic elds generated from these devices may distort the video image or
otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendaons in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introducon of
corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun. In some circumstances, direct sunlight may
cause permanent damage to the sensor and/or internal circuits, as well as creang
unbalanced illuminaon beyond the capability of the camera to compensate.
4. Keep the power cable away from water and other liquids and never touch the power cord
with wet hands. Touching a wet power cord with your hands or touching the power cord
with wet hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents. Oil, gas or solvents may
result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning. For cameras with interchangeable lenses, do not touch the surface of the sensor
directly with the hands. Use lens ssue or a cotton pped applicator and ethanol to clean
the sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera
body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any
part of the camera.
7. Do not operate the camera beyond the specied temperature, humidity or power source
rangs. This camera is suitable for indoor operaon only. Use the camera at temperatures
within -40°C~50 (- °F~1 °F) and humidity between 20%~ 80%; this device is not rated °C 40 22
as submersible. The input power source is 12VDC or 24VAC. Be sure to connect the proper +
/ - polarity and voltage, as incorrect polarity or too high a voltage will likely cause the
camera to fail, and such damage is not covered by the warranty.
8. Mounng. Use care in selecng a solid mounng surface which will support the weight of
the camera plus any wind, snow, ice or other loading, and securely aach the camera to the
mounng surface using screws and anchors which will properly support the camera. If
necessary (e.g. when mounng to drop ceilings) use a safety wire to provide addional
support for the camera.
3
Safety Noce
Federal Communicaon Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon
against harmful interference in a residenal installaon. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons. However, there is no
guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Cauon: Any changes or modications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two
condions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operaon.

Especificaciones del producto

Marca: Fun Generation
Categoría: Equipo de DJ
Modelo: USB Mix 3

¿Necesitas ayuda?

Si necesitas ayuda con Fun Generation USB Mix 3 haz una pregunta a continuación y otros usuarios te responderán


Equipo de DJ Fun Generation Manuales

Fun Generation

Fun Generation USB Mix 2 Manual de Usario

31 Agosto 2024
Fun Generation

Fun Generation USB Mix 4 Manual de Usario

30 Agosto 2024
Fun Generation

Fun Generation USB Mix 3 Manual de Usario

29 Agosto 2024

Equipo de DJ Manuales

Últimos Equipo de DJ Manuales

Line 6

Line 6 Helix Control Manual de Usario

27 Octubre 2024
Line 6

Line 6 HX Effects Manual de Usario

15 Octubre 2024
Korg

Korg DT-10 Manual de Usario

8 Octubre 2024
Tascam

Tascam XS-3 Manual de Usario

2 Octubre 2024
Behringer

Behringer PSU11-UL Manual de Usario

2 Octubre 2024
Numark

Numark Scratch Manual de Usario

2 Octubre 2024
Pioneer

Pioneer DJM-750MK2 Manual de Usario

2 Octubre 2024
Audio-Technica

Audio-Technica AT-VM95EN Manual de Usario

29 Septiembre 2024
Karcher

Karcher RR 5140BT Manual de Usario

29 Septiembre 2024
Korg

Korg OT-120 Manual de Usario

27 Septiembre 2024