Gamber-Johnson 7160-0318-04 Manual de Usario

Gamber-Johnson Otro accesorio de computadora 7160-0318-04

Lee a continuación 📖 el manual en español para Gamber-Johnson 7160-0318-04 (9 páginas) en la categoría Otro accesorio de computadora. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/9
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
7160-0318-00 THROUGH 7160-0318-12
INSTALLATION INSTRUCTIONS
Form Product Revision
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
PS-001
PANASONIC TOUGHBOOK CF-31 DOCKING STATION
Item No. 7160-0318-06 (-P)
Item No. 7160-0318-12 (-P)
(Auto lock, Dual RF)
Item No. 7160-0318-09 (-P)
(Button lock, Dual RF, Int power)
dual integrated high gain antenna pass-thru cable.
(Button lock, Dual RF)
Item No. 7160-0318-02 (-P)
(Auto lock, Dual RF, Int. power)
shielded interface cables when connecting a peripheral to the docking station.
This instruction sheet is for the following products:
Panasonic Toughbook CF-31 docking station with NO integrated
high gain antenna pass-thru cables.
Item No. 7160-0318-00 (-P) (button lock, No RF)
Item No. 7160-0318-04 (-P) (button lock, No RF, Int. power)
Item No. 7160-0318-07 (-P) (Auto lock, No RF)
Item No. 7160-0318-10 (-P) (Auto lock, No RF, Int power)
Panasonic Toughbook CF-31 docking station with single
integrated high gain antenna pass-thru cable.
Item No. 7160-0318-01 (-P) (Button lock, Single RF)
Item No. 7160-0318-05 (-P) (Button lock, Single RF, Int power)
Item No. 7160-0318-08 (-P) (Auto lock, Single RF)
Item No. 7160-0318-11 (-P) (Auto lock, Single RF, Int. power)
Panasonic Toughbook CF-31 docking station with
* These instructions are for the docking station only. For instructions on features, set-up
and operation of the Toughbook CF-31 computer, please refer to the manuals provided by
Panasonic with the computer.
** This docking station is designed to be used with a variety of Gamber Johnson mounting
systems. Installation for other Gamber Johnson products are provided with each
individual product.
*** This device is Class B verified to comply with Part 15 of FCC Rules when used with a
Panasonic Toughbook CF-31 computer. To assure continued compliance, use only
Pg 1
REV. K INST-509
©
C
opyright 20
1
7
Gamber
-
Johnson, LLC
CF-31 DOCKING STATION FEATURE IDENTIFICATION
Alignment Pin
Interlock Pin
Front Retainer
Docking Connector
External Antenna
Connectors
Alignment Pin
USB Port
Docking Indicator
LED
Docking Handle
Push Button / Auto Lock
Wireless Antenna Switch
(WWAN Antenna)
Serial 2
Serial 1
Video Connection
External Microphone External Speaker
or Headphones
Ethernet 2
Ethernet 1
USB Ports
Cable Restraint
Bracket
WLAN/GPS Antenna
Connector
WWAN Antenna
Connector
DC IN
Pg 2
Power Supply, Cables &Covers
Internal Power Models Only
IMPORTANT SAFETY INFORMATION FOR
INSTALLERS
Safety is dependent on the proper installation and servicing of this docking station. It is important to
read and follow all instructions before installing this product.
To properly install Gamber Johnson docking station you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the installation and service of
aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the docking station.
Opening the port replication housing will void the product warranty.
During Installation:
DO NOT connect this docking station to the vehicle battery until:•
ALL other electrical connections are made1.
Mounting of ALL components is complete2.
VERIFICATION that no shorts exist in the entire system3.
DO NOT install equipment or route wiring or cords in the deployment path of any airbag.•
When drilling into the vehicle. DO make sure that both sides of the surface are clear of anything •
that could be damaged.
CAUTION: If wiring is shorted to the frame, high current conductors can cause hazardous
sparks resulting in electrical fires or flying molten metal.
After Installation:
Test the docking station to ensure that it is working properly.•
File these instructions in a safe place and refer to them when performing maintenance or re-•
installing.
WARNING: Failure to follow all safety precautions and instructions may result in property
damage, serious injury or death.
PRE-INSTALLATION RECOMMENDATIONS
Conduct a "Bench Test"
Gamber Johnson strongly advises a "Bench Test" be conducted to verify that all electronic and software
issues are resolved prior to installation:
Make sure computer is operational by itself.1.
Insert computer into docking station and verify that the computer is operating in the dock.2.
Interconnect entire assembly and verify start-up of all components, including other equipment 3.
(printers,modems, scanners, etc.)
*Gamber Johnson recommends positioning of all mounts and equipment in the vehicle prior to the actual
install to verify that mounting locations are safe and practical.
Pg 3

Especificaciones del producto

Marca: Gamber-Johnson
Categoría: Otro accesorio de computadora
Modelo: 7160-0318-04

¿Necesitas ayuda?

Si necesitas ayuda con Gamber-Johnson 7160-0318-04 haz una pregunta a continuación y otros usuarios te responderán


Otro accesorio de computadora Gamber-Johnson Manuales

Gamber-Johnson

Gamber-Johnson 7300-0190-10 Manual de Usario

16 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7170-0647 Manual de Usario

11 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-0358-P Manual de Usario

11 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-0318-04 Manual de Usario

11 Septiembre 2024

Otro accesorio de computadora Manuales

Últimos Otro accesorio de computadora Manuales

Avocent

Avocent AVCTBND1 Manual de Usario

26 Octubre 2024
Panasonic

Panasonic CF-VEB522 Manual de Usario

24 Octubre 2024
Sony

Sony PCGA-AC71 Manual de Usario

20 Octubre 2024
Dell

Dell WD19DC Manual de Usario

14 Octubre 2024
Lenco

Lenco IPT-223 Manual de Usario

13 Octubre 2024
Sony

Sony PCGA-CG10 Manual de Usario

8 Octubre 2024
Acer

Acer USB Type-C Dock III Manual de Usario

7 Octubre 2024
Origin Storage

Origin Storage OSDOCK-MMUSBCA Manual de Usario

3 Octubre 2024
Origin Storage

Origin Storage OSDOCK-USBC Manual de Usario

3 Octubre 2024
Origin Storage

Origin Storage OSDOCK-USB3 Manual de Usario

3 Octubre 2024