Gamber-Johnson 7160-0880 Manual de Usario

Gamber-Johnson Base/estación de acoplamiento 7160-0880

Lee a continuación 📖 el manual en español para Gamber-Johnson 7160-0880 (5 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/5
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Rev.A
INST-777
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
1/5
INSTALLATION INSTRUCTIONS
Product
Revision
Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
PS-001
GETAC- RX10H MEDICAL DOCK
7160-0880
This instruction sheet is for the RX10H docking station only. For instructions on
features, set-up, and operation of the RX10 computer, please refer to the manual
provided by Getac with the computer.
This docking station is designed to be used with a variety of Gamber-Johnson
mounting systems. Installation instructions for other Gamber-Johnson products
are provided with each individual product.
This instruction sheet is for the following products:
For Vehicle Mounting Applications (M4 X 0.7 Mounting Hardware):
Item No. 7160-0880-00 DOCK - GETAC - RX10H -No RF
Item No. 7160-0880-03 DOCK - GETAC - RX10H -Tri-RF
Conduct a "Bench Test"
Gamber-Johnson strongly advises a "bench test" be conducted to verify all
electronic and software issues are resolved prior to installation:
Make sure the computer is operational by itself.
1.
Insert computer into the docking station and verify that the computer is
2.
operating in the dock.
Interconnect entire assembly and verify start-up of all components,
3.
including other equipment (printers, modems, scanners, etc.)
Gamber-Johnson recommends positioning of all mounts and equipment in the
vehicle prior to the actual install to verify that mounting locations are safe and
practical.
PRE-INSTALLATION RECOMMENDATOINS
During Installation:
DO NOT
connect this docking station to the vehicle battery until:
All other electrical connections are made
1.
Mounting of all components is complete
2.
Verification that no shorts exist in the entire system
3.
DO NOT
install equipment or route wiring or cords in the deployment path of any air bag.
When drilling into the vehicle, DO make sure that both sides of the surface are clear of
anything that could be damaged.
CAUTION:
If wiring is shorted to the frame, high current conductors can cause hazardous
sparks resulting in electrical fires or flying molten metal.
After installation:
Test the docking station to ensure that it is working properly.
File these instructions in a safe place and refer to them when performing maintenance or re-
installing.
WARNING
: Failure to follow all safety precautions and instructions may result in property
damage, serious injury, or death.
Safety is dependent on the proper installation and servicing of this docking station. It is
important to read and follow all instructions before installing this product.
To properly install a Gamber-Johnson docking station you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the installation and
service of aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the
docking station.
Opening the docking station will void the product warranty.
IMPORTANT SAFETY INFORMATION FOR INSTALLERS
2/5
Thumb Knob
Latch
Lock
Through Holes
for mounting to
a wall
Guide Pins
Docking Connector
Triangle Alignment Mark
TRI-RF
Connector
GPS
WLAN
WWLAN
VGA PORT
Ethernet
19 Vdc Input
(1) USB 3.0
HDMI
(3) USB 2.0
Part#/Serial #
Label
Vesa 75mm Hole Pattern
M4 X 0.7 Threaded Inserts
Warranty Label
Port Identification Label
Cable Restraint Bracket
RX10H DOCKING STATION FEATURE IDENTIFICATON
3/5

Especificaciones del producto

Marca: Gamber-Johnson
Categoría: Base/estación de acoplamiento
Modelo: 7160-0880

¿Necesitas ayuda?

Si necesitas ayuda con Gamber-Johnson 7160-0880 haz una pregunta a continuación y otros usuarios te responderán


Base/estación de acoplamiento Gamber-Johnson Manuales

Gamber-Johnson

Gamber-Johnson 7170-0551-03 Manual de Usario

16 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-1642-00 Manual de Usario

16 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-1882-00 Manual de Usario

16 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-1883-00 Manual de Usario

16 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-1882-10 Manual de Usario

16 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-1584-00 Manual de Usario

16 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-1884-00 Manual de Usario

16 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-1084 Manual de Usario

11 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-1418 Manual de Usario

11 Septiembre 2024
Gamber-Johnson

Gamber-Johnson 7160-1368 Manual de Usario

11 Septiembre 2024

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales

Pyle

Pyle PHST92IBK Manual de Usario

20 Octubre 2024
Roberts

Roberts R100 Manual de Usario

19 Octubre 2024
Yamaha

Yamaha ISX-800 Manual de Usario

17 Octubre 2024
Polk

Polk BOOM Bit Manual de Usario

16 Octubre 2024
Vorago

Vorago KSP-600 Manual de Usario

8 Octubre 2024
IDance

IDance Mini Blaster 2L Manual de Usario

7 Octubre 2024
Pyle

Pyle PWPBT05BL Manual de Usario

5 Octubre 2024
Ewent

Ewent EW7018 Manual de Usario

5 Octubre 2024
Jam

Jam Splash Manual de Usario

5 Octubre 2024
Denver

Denver BTG-615 Manual de Usario

5 Octubre 2024