Gamber-Johnson 7170-0551-03 Manual de Usario

Lee a continuación 📖 el manual en español para Gamber-Johnson 7170-0551-03 (8 páginas) en la categoría Base/estación de acoplamiento. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
Rev. I INST-775
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
PS-001
INSTALLATION INSTRUCTIONS
Form Product Revision
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
7160-0882
Dell Latitude Rugged Laptop Docking Station
Dock - Dell Rugged Laptop Tri RF Item No. 7160-0882-03
Dock - Dell Rugged Laptop No RF Item No. 7160-0882-00
This instruction sheet is for the following products:
1.
Dell 14" Rugged Laptop2.
Dell 14" Rugged Extreme Laptop3.
Dell 14" Rugged Extreme Business Laptop
Note: *Use the hardware provided in the hardware bag for attaching the dock to the
mounting surface.
4.
See page 4 for set-up instructions.
This instruction sheet is for the Dell Rugged Laptop docking station only. For instructions
on features, set-up, and operation of the Dell Rugged computer, please refer to the
manual provided by Dell with the computer.
This docking station works with
Dell 12" Latitude Rugged Extreme 2-in-1 Laptop
Gamber Johnson recommends the following power supply to power the
docking station. They can be ordered from Gamber-Johnson seperatley.
7300-0468 - Auto (11-16 Vdc Input) - Available with the docking station as KIT
7170-0551-00 7170-0551-03 (Non-RF) and (Tri-RF)
1 / 8
© copyright 20
21
Gamber
-
Johnson, LLC
prior to the actual install to verify that mounting locations are safe and practical.
serious injury, or death.
When drilling into the vehicle, DO make sure that both sides of the surface are clear of anything that
could be damaged.
CAUTION: If wiring is shorted to the frame, high current conductors can cause hazardous sparks
resulting in electrical fires or flying molten metal.
After installation:
Safety is dependent on the proper installation and servicing of this docking station. It is important to
read and follow all instructions before installing this product.
To properly install a Gamber-Johnson docking station you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the installation and service of
aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the docking station.
install equipment or route wiring or cords in the deployment path of any air bag.
IMPORTANT SAFETY INFORMATION FOR INSTALLERS
Opening the docking station will void the product warranty.
: Failure to follow all safety precautions and instructions may result in property damage,
Test the docking station to ensure that it is working properly.
File these instructions in a safe place and refer to them when performing maintenance or re-
installing.
WARNING
During Installation:
DO NOT connect this docking station to the vehicle battery until:
All other electrical connections are made1.
Mounting of all components is complete2.
Verification that no shorts exist in the entire system3.
DO NOT
Conduct a "Bench Test"
Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and
software issues are resolved prior to installation:
Make sure the computer is operational by itself.1.
Insert computer into the docking station and verify that the computer is 2.
operating in the dock.
Interconnect entire assembly and verify start-up of all components, including 3.
other equipment (printers, modems, scanners, etc.)
Gamber-Johnson recommends positioning of all mounts and equipment in the vehicle
PRE-INSTALLATION RECOMMENDATIONS
2 / 8
DELL RUGGED DOCKING STATION FEATURE IDENTIFICATION
3 / 8
DO NOT OVER-TORQUE BOLTS
Power
(Use 1/4-20 hardware bag
for mounting.)
WLAN
RF-ANT 1
GPS
RF-ANT 2
WWAN
HDMI
Ethernet
VGA
Serial
Serial RF-ANT 3
(900mA)
3x USB 3.0
Recommended Torque = 25 in/lbs
Vesa 75 mm hole pattern
MICROPHONE
JACK
(Optional)
Adjustable Front Hooks
TRI RF Connector
Connector
Rear Hook
Lockable Latch
Docking
(For Front Hook Adjustment)
Recessed Button
(900mA)
USB 2.0
HEADPHONES/
SPEAKER JACK

Especificaciones del producto

Marca: Gamber-Johnson
Categoría: Base/estación de acoplamiento
Modelo: 7170-0551-03

¿Necesitas ayuda?

Si necesitas ayuda con Gamber-Johnson 7170-0551-03 haz una pregunta a continuación y otros usuarios te responderán




Base/estación de acoplamiento Gamber-Johnson Manuales

Base/estación de acoplamiento Manuales

Últimos Base/estación de acoplamiento Manuales