GARDE 181ONSLIC14 Manual de Usario

GARDE maquina cortadora 181ONSLIC14

Lee a continuación 📖 el manual en español para GARDE 181ONSLIC14 (4 páginas) en la categoría maquina cortadora. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
USER MANUAL
1/4”
Item #181ONSLIC14
3/16”
Item #181ONSLC316
07/2020
Onion Slicers
Safety Instructions
Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands
away from the blades. When not in use, use the ring pin to secure the machine in the lockdown posion.
Operation
1) Remove ring pin from lockdown posion hole and place in the hole on the handle.
2) Use the handle to raise the push plate to the upright posion.
3) Carefully place produce on the blade surface. Make sure the produce isn’t larger than the blade surface.
a. Note: For proper funconality and slice size make sure the two appropriate blade cartridges are set
on top of one another.
4) Make sure hands/ngers are clear of the cung area.
5) With one rm, swi moon bring the handle down unl the push plate pushes the produce completely
through the blade cartridges.
Cleaning and Maintenance
1) To remove pusher assembly, remove the ring pin and use the handle to li the pusher assembly o of the
guide rods.
2) Carefully remove both blade assemblies from the main frame one at a me
3) Thoroughly clean the frame, blade assemblies, and pusher assembly.
4) Dry all components then replace the blade assembly, pusher assembly, and ring pin.
5) If necessary lubricate the guide rods with food grade mineral oil. Do NOT use cooking or vegetable oil.
Please read and comply with the instrucons listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and aer each use by following the instrucons
listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.
USER MANUAL
3/16” Blade Set
#181ONBLD316
1/4” Blade Set
#181ONBLD14
3/16” Pusher Plate
#181ONPUSH316
1/4” Pusher Plate
#181ONPUSH14
Chain Pin Assembly
#181CHAINPIN
Non-Skid Foot
#181NSKIDFEET
Replacement Parts
USER MANUAL
Bushing
#181BUSHING2
Bumper
#181BUMPER2

Especificaciones del producto

Marca: GARDE
Categoría: maquina cortadora
Modelo: 181ONSLIC14

¿Necesitas ayuda?

Si necesitas ayuda con GARDE 181ONSLIC14 haz una pregunta a continuación y otros usuarios te responderán




maquina cortadora GARDE Manuales

maquina cortadora Manuales

Últimos maquina cortadora Manuales