GE JX36DWW Manual de Usario

GE Magnetron JX36DWW

Lee a continuación 📖 el manual en español para GE JX36DWW (2 páginas) en la categoría Magnetron. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Installation Filler Panel Kit

Instructions JX36

FOR 36” INSTALLATIONS

49-40720-4 07-17 GEA

TOOLS YOU WILL NEED

• Phillips screwdriver

PARTS INCLUDED

• Trim kit side mount (2)

• Connecting Bar (1)

• Installation screws (2)

Kit Model

JX36B CVM1750/CVM1790/CSA1201/

PSA9120/PSA9240/JVM3162/

JNM3163/PVM9179EF/

PVM9179DF/PVM9179SF

JX36C JVM6170/JNM6171/JVM6172/

JVM6175/JVM6177

JX36D JVM7195/DVM7195/JNM7196/

PVM9195/PNM9196/PVM9215/

PNM9216/

PVM9179EK/PVM9179DK/

PVM9179SK

CVM9179/CVM9215

Installation Instructions

Install the OTR bracket according to OTR

Installation Instructions.

NOTE: This kit is best installed with 12” base

cabinets. Cabinets with greater than a 12” base

may have a larger gap between back wall and

kit.

NOTE: Ensure the OTR and the Cooking

Product installation manuals are followed.

1. Place the microwave on a flat surface where

you can work on the bottom of both sides.

2. Remove all 3 pieces from the package (right

panel, left panel, top brace.

3. Remove the screws from the lower back

corner of the microwave.

4. Your microwave will have 1-3 screws on the

bottom left side. Remove these screws to

create a gap between the bottom plate and

the case of the microwave.

NOTE: For CVM9179 and CVM9215, Also

remove the screw from the bottom left front

side attaching the heat deflector.

5. With the short edge of the side trim to the

back of the left side of the microwave, slide

the lower lip of the side panel inside the gap

between the bottom plate and the case.

6. Attach the side trim to the back of the

microwave using the screw removed in step 3,

then reattach the screws removed in step 4 to

the underside of the microwave.

7. Make adjustments so the side panel is in line

with the front of the microwave case.

8. Repeat the same procedure for the other side.

9. Using the 2 flat head screws provided, attach

the top brace to the 2 side panels to pull both

panels together.

10. Install the over-the-range microwave with side

panels into the 36” opening.

NOTE: Make sure you have installed the

mounting wall bracket in the center of the 36”

opening per the installation instructions provided

with your microwave.

OTR Bracket

Flush with front of

microwave case.

KIT INSTALLATION

Screw

Holes

Printed in USA

Especificaciones del producto

Marca:	GE
Categoría:	Magnetron
Modelo:	JX36DWW
Colocación del dispositivo:	Aanrecht
Tipo de operación:	Touch
Color del producto:	Wit
Peso.:	708 g
Ancho:	20 mm
Profundidad:	25.5 mm
Altura:	0.42 mm
Amable:	Elektronische keukenweegschaal
Tipo de material (arriba):	Glas
Interruptor encendido / apagado:	Ja
Apagado automático:	Ja
Exactitud:	1 g
Capacidad máxima de peso:	5 kg
Forma:	Rechthoek
Unidad de medida:	g, lb, ml, oz
Indicador de sobrecarga:	Ja
Tipo-de-visualización:	LCD
Función de tara:	Ja
Función de conversión:	Ja
Alta-precisión:	Ja