Panasonic NN-CT552W Manual de Usario

Panasonic Magnetron NN-CT552W

Lee a continuación 📖 el manual en español para Panasonic NN-CT552W (34 páginas) en la categoría Magnetron. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/34
/ 9
E
N
G
L
I
S
H
1
CAUTION
z
z
z
zz CAREFULLY READ THIS MANUAL BEFORE OPERATING YOUR
BOAT.
z
z
z
zz THIS OWNER’S MANUAL IS IN TWO VOLUMES THAT MUST BE
KEPT TOGETHER.
NOTICE:
THE OWNER'S MANUAL IS IN TWO VOLUMES:
- VOLUME 1
DEALS WITH OPERATING PRECAUTIONS AND SAFETY
RECOMMENDATIONS THAT MUST BE OBSERVED.
- VOLUME 2
DEALS WITH TECHNICAL SPECIFICATIONS AND ASSEMBLY
PROCEDURE OF THE BOAT AND ITS EQUIPMENT.
VOLUME 2
TECHNICAL SPECIFICATIONS - ASSEMBLY PROCEDURE
ZODIAC
CADET AERO
240 AERO - 260 AERO
CADET FAST ROLLER ACTI-V
CFR 285 ACTI-V - CFR 325 ACTI-V
CADET FAST ROLLER ACTI-V INT’L
CFR 360 ACTI-V INT’L
CONTENTS
Page Page
Ö
Ö
Ö
ÖÖ Ö
Ö
Ö
ÖÖAssembly procedure 2 Pressure 7
Ö
Ö
Ö
ÖÖ Ö
Ö
Ö
ÖÖCheck on unpacking 2 Assembly of equipment 8
Ö
Ö
Ö
ÖÖ Ö
Ö
Ö
ÖÖAssembly 3-4 Deflation - folding the boat 9
Ö
Ö
Ö
ÖÖInflation system 5
Ö
Ö
Ö
ÖÖ Ö
Ö
Ö
ÖÖInflation 6 General description I - VI
/ 9
2
ASSEMBLY PROCEDURE
We recommend that you follow the specific order of the assembly procedure. Proceed step by step
and refer to the corresponding pages.
PROCEDURE PAGE SECTION
1. inventory the elements composing your boat,
and learn how to recognise them
2 CHECK ON UNPACKING
I - V DESCRIPTION
2. Install the stowage box (Model Int’L only) 3 ASSEMBLY
3. activate valves into inflating position 5 INFLATION SYSTEM
4. install the H2P floor in the boat 4 ASSEMBLY
5. Begin inflation of the boat. (not completely) 6 INFLATION
6. Inflate the H2P floor to correct pressure 6 INFLATION / PRESSURE
7. Install the seat 8 ASSEMBLY OF EQUIPMENT
8. finish inflation of the boat to the correct pressure 6- 7 INFLATION / PRESSURE
9. Install the oars 8 ASSEMBLY OF EQUIPMENT
CHECK ON UNPACKING
CAUTION
DO NOT USE A SHARP TOOL
The pack must contain: 1 buoyancy tube +
CADET Aero
240
Aero
260
CFR
285 acti-v
CFR
325 acti-v
CFR
360 acti-v –
Int’L
Inflatable floorboard H2P
+ keel X X
Acti-V floorboard (built-in
keel) X X X
Repair kit X X X X X
Owner’s manual * X X X X X
Standard equipment
Removable wooden seat X X X X X
Carry bag X X X X X
Reinforced aluminium
oar 2 2 2 2 2
Fuel tank strap X X X X X
High pressure foot pump X X X X X
Stowage box Int’L (with
bag) X
* 2 volumes
You can equip your boat with many optional accessories (transportation wheels, boarding ladder,
lifting rings etc.). Ask your dealer to advise you.
/ 9
E
N
G
L
I
S
H
3
BOAT ASSEMBLY
CHOOSE A SMOOTH, CLEAN SURFACE.
IF THE BUOYANCY TUBE WAS STORED AT A TEMPERATURE BELOW 0°C / 32°F,
LEAVE IT AT 20°C / 68°F FOR 12 HOURS BEFORE UNFOLDING.
INSTALLING THE REMOVABLE RECESSED STOWAGE BOX (INT’L SYSTEM ONLY).
CAUTION
THE STOWAGE BOX MUST BE INSTALLED ON ITS FLANGE BEFORE INFLATING THE
MAIN BUOYANCY TUBE.
IF THE TUBE IS INFLATED WITHOUT THE BOX, THE POCKET PROVIDING SEALING
INTEGRITY MAY BE DAMAGED.
TO LOCK THE BOX ON ITS FLANGE, INSERT THE BOX LUGS INTO THE
CORRESPONDING SOCKETS ON THE FLANGE.
CAUTION THERE IS A PREFERENTIAL POSITION (LOCK SLOT TOWARDS THE INSIDE
AND IN THE BOAT'S LONGITUDINAL CENTERLINE) TO ALLOW THE BOX TO BE
TURNED TO ITS LOCKED POSITION.
CAUTION:
THE BOAT MUST BE DEFLATED FOR THE
INSTALLATION
THE BOAT MUST NEVER BE INFLATED WITHOUT THE
BOX BEING INSTALLED.
1- Insert the box into the buoyancy tube flange.
The lock closing slot must be in the boat's longitudinal
centerline and towards the inside of the deck
2- Lock the box by turning it through a 1/6th of a turn
in the clockwise direction.
3- Make sure that the box is properly locked and fully
home.
You can then inflate the boat
4- Always use the key to open or close.
REMOVING THE REMOVABLE RECESSED STOWAGE BOX.
CAUTION
IT IS ESSENTIAL TO DEFLATE THE BOAT (ZERO PRESSURE) BEFORE REMOVING THE
REMOVABLE BOX.
TO FOLD THE BOAT AFTER DEFLATING IT, FIRST REMOVE THE REMOVABLE BOX
(following the assembly procedure in the reverse order).

Especificaciones del producto

Marca: Panasonic
Categoría: Magnetron
Modelo: NN-CT552W

¿Necesitas ayuda?

Si necesitas ayuda con Panasonic NN-CT552W haz una pregunta a continuación y otros usuarios te responderán




Magnetron Panasonic Manuales

Magnetron Manuales

Últimos Magnetron Manuales