GL.iNet Flint GL-AX1800 Manual de Usario

GL.iNet Enrutador Flint GL-AX1800

Lee a continuación 📖 el manual en español para GL.iNet Flint GL-AX1800 (3 páginas) en la categoría Enrutador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
Let’s get
started.
GL-AX1800 / Flint
AX Wireless Router1800
Set Up Router
Visit http://192.168.8.1 in your browser to set
up your router; start by choosing your preferred
language.
Power On
When powered up, your router will broadcast
both 2.4G and 5G Wi-Fi signal with the SSID:
GL-AX1800-xxx GL-AX1800-xxx-5G and .
or
Default password is goodlife
Search the SSID and connect to it
Connect to the Wi-Fi called , GL-AX1800-xxx
and then input the default Wi-Fi password
goodlife, which is also printed on the bottom
of the router.
Connect via Wi-Fi Connect via LAN
Plug the cable connecting
to your computer into LAN port
Plug in power cable
SETTING UP
SUPPORT
Technical Supports
For more detailed and updated instructions, please visit our website docs.gl-inet.com
For further questions, you can get help from the following ways:
- Email to support@gl-inet.com
- Message us on our Facebook: facebook.com/gl.inet.wifi/
- Post questions in our forum: forum.gl-inet.com
- Ask professionals in other forums e.g. OpenWrt, LEDE or other professional websites
Repair / Reset
If you cannot access the web-based setup page or cannot connect to the router,
you can press the button:Reset
Press and hold for , and then release to repair your network.3 seconds
Press and hold for , and then release to reset the router to 10 seconds
factory settings. All user data will be cleared. https://docs.gl-inet.com/en/3/
USB3.0 port
LAN port
WAN port
Reset button
Reset button
Sync button
LED light
WARRANTY
We provide for routers and for accessories. Extra warranty may apply one year limited warranty 3-month limited warranty
according to the local law in which the product purchase took place.
Highly recommend using the included power adapter.12V/1.5A
Any damage to the router caused by not following the instructions will render this warranty null and void.
Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void.
Issues caused by the use of third-party firmware may not get official support from us.
Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or
on the ground will render this warranty null and void.
Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice.
ver. 20210824
GL Technologies (Hong Kong) Limited
Unit 203, 2/F, Building 19W, 19 Science Park West Avenue,
Hong Kong Science Park, Pak Shek Kok, N.T., Hong Kong
Hong Kong Office
Shenzhen Guanglianzhitong Tech Co., Ltd.
Room 305 - 306, Skyworth Digital Building, Shiyan Street,
Baoan District, Shenzhen, China, 518000 ( +86-0755-86606126 )
Shenzhen Office
Hereby, GL TECHNOLOGIES (HONG KONG) LIMITED declares that the radio equipment type [AX1800 Wireless Router, GL-AX1800] is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:
https://www.gl-inet.com/products/certificate
Caution:
This product uses WiFi 2.4GHz Operating Frequency is 2400~2483.5MHz/20dBm; 5GHz Operating Frequency is 5150~5250MHz/23dBm.
Restriction Statement:
The 5150~5250MHz band is allocated for indoor use only.
Restriction in BE, BG, CH, CZ, DK, DE, EE, IE, EL, ES, FR, HR, IT, CY, LV, LT, LU, HU, MT, NL, AT,PL, PT, RO, SI, SK, FI, SE, UK(NI).
The Product comply with Directive 2011/65/EU and its amendment directive 2015/863/EU (RoHS2.0)
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
3. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help important announcement.
FCC ID: 2AFIW-AX1800
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum
distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Especificaciones del producto

Marca: GL.iNet
Categoría: Enrutador
Modelo: Flint GL-AX1800

¿Necesitas ayuda?

Si necesitas ayuda con GL.iNet Flint GL-AX1800 haz una pregunta a continuación y otros usuarios te responderán




Enrutador GL.iNet Manuales

Enrutador Manuales

Últimos Enrutador Manuales