Globe G12A Manual de Usario

Globe No categorizado G12A

Lee a continuación 📖 el manual en español para Globe G12A (9 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/9

Instruction Manual for the Globe Slicer

Models: G10, G12, G12A, and G14

This manual contains important safety instructions that

must be strictly followed when using this equipment.

For Service on Your Slicer:

1. Visit our website at www.globefoodequip.com

2. Or call the Globe Service Department at 937-299-8625 and ask for contact

information for your local service company.

Visit our website for information on additional products available from Globe.

www.globefoodequip.com

Slicers, Mixers, Countertop Cooking Equipment, Meat Choppers & Scales

- IMPORTANT SAFETY NOTICE -

Model #:

Serial #:

WARRANTY REGISTRATION

SCAN THE QR CODE WITH YOUR MOBILE DEVICE OR GO TO

WWW.GLOBEFOODEQUIP.COM

TO FILL OUT AND SUBMIT YOUR WARRANTY REGISTRATION.

WWW.GLOBEFOODEQUIP.COM/SUPPORT/WARRANTY-REGISTRATION-FORM

2010

Model G12

Page 5

Globe Slicer Safety Tips

SHARP KNIFE BLADE

TO AVOID SERIOUS PERSONAL INJURY:

• NEVER touch this slicer without training and authorization from your supervisor or if you are under 18

years old. Read this instruction manual rst.

• ONLY install the slicer on a level nonskid surface that is nonammable and is located in a clean, well-lit

work area away from children and visitors.

• ALWAYS ground slicer utilizing proper power source.

• NEVER TOUCH KNIFE. Keep hands and arms away from all moving parts.

• NEVER OPERATE slicer without knife cover, knife sharpener and knife ring guard securely installed.

• BEFORE TURNING SLICER ON, place auto engage lever in “Manual” position (G12A only).

• BE ALERT. The food chute moves back and forth during automatic operation and can move in either

direction on start up (G12A only).

• NEVER HOLD THE FOOD PRODUCT WHILE SLICING. Hold only the end weight handle to slice.

• DO NOT CATCH SLICES WITH YOUR HAND. Let slices drop onto the receiving area.

• ALWAYS turn slicer off, return auto engage lever to “Manual” position (G12A only) and turn the slice

thickness dial clockwise until it stops after each use.

• BEFORE CLEANING, SHARPENING, SERVICING, OR REMOVING ANY PARTS always turn slicer off,

turn the slice thickness dial clockwise until it stops, remove food chute and unplug power cord.

• ALWAYS properly clean and sanitize your slicer. To prevent illness or death caused by the spread of

food-borne pathogens, it is important to properly clean and sanitize the entire slicer as any surface of the

slicer can become contaminated. It is the responsibility of the slicer owner/operator to follow all guide-

lines, instructions and laws as established by your local and state health departments and the manufac-

turers of chemical sanitizers.

• USE ONLY GLOBE SLICER ACCESSORIES properly installed.

Page 7

6. Install food chute on food chute arm (Fig. 7-1).

7. Install food chute arm and food chute on slicer base.

Securely tighten food chute release knob to prevent “play”

between food chute and chute arm (Fig. 7-2).

NEVER USE SLICER WITHOUT RUBBER FEET ON

UNIT.

8. Select a location for the slicer that has a level, solid, nonskid

surface that is nonammable and is in a well-lit work area

that is away from children and visitors.

USE AT LEAST TWO PEOPLE TO LIFT SLICER UP TO OPERATING

LOCATION. NEVER ATTEMPT TO LIFT SLICER ALONE.

THIS MACHINE IS PROVIDED WITH A THREE-PRONG GROUNDING

PLUG. THE OUTLET TO WHICH THIS PLUG IS CONNECTED MUST

BE PROPERLY GROUNDED. IF THE RECEPTACLE IS NOT THE

PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO

NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD

GROUND PRONG FROM THE POWER CORD OR USE ANY ADAPTER

PLUG (Fig. 7-3 and Fig. 7-4).

9. Inspect slicer to make sure all parts have been provided.

10. Make sure knife cover, knife ring guard and knife sharpener are in place.

11. Make sure warning label is properly positioned and legible and the instruction manual is available near slicer.

12. Complete warranty registration online at www.globefoodequip.com/support/warranty-registration-form.

13. Post the provided wall chart in a visible area near slicer. Refer to this wall chart and the Owner’s Manual

for proper cleaning, sanitizing and inspection of your slicer.

14. Clean slicer using the procedures outlined in Cleaning & Sanitizing (pages 10 and 13) before using slicer.

15. Contact your local representative, or Globe directly, if you have questions or problems with the installation or

operation of slicer.

Installation

Figure 7-3 Correct Figure 7-4 Incorrect

Figure 7-2

Figure 7-1

Especificaciones del producto

Marca:	Globe
Categoría:	No categorizado
Modelo:	G12A
Color del producto:	Zwart
Peso.:	60 g
Ancho:	112 mm
Profundidad:	120 mm
Altura:	18 mm
Peso del embalaje:	66 g
Ancho del embalaje:	170 mm
Empaquetadura en profundidad:	142 mm
Altura del embalaje:	30 mm
Indicadores LED:	Activity, Link
Tecnología de conectividad:	Bedraad
red LAN:	Ja
Número de puertos Ethernet LAN (RJ-45):	2
Interfaz:	Ethernet
LAN Ethernet, velocidades de transferencia de datos:	10,1000,2500,100,2000 Mbit/s
Estándar de red:	IEEE 1588, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3i, IEEE 802.1as, IEEE 802.1p, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3az, IEEE 802.1x
Temperatura de almacenamiento:	-10 - 70 °C
Interno:	Ja
Compatible con Linux:	Ja
Guía de Instalación Rápida:	Ja
Tipo de interfaz Ethernet:	Gigabit Ethernet, 2.5 Gigabit Ethernet, Fast Ethernet
Interfaz de host:	PCI Express
Velocidad máxima de transferencia de datos:	2500 Mbit/s
Calidad de servicio (QoS):	Ja
Sistemas operativos de servidor compatibles:	Windows Server 2019, Windows Server 2022
Compatibilidad con tramas gigantes:	Ja
Tecnología de cableado Ethernet de cobre:	100BASE-TX, 10BASE-TX, 1000BASE-T, 2500BASE-T
conjunto de chips:	Intel I225-V
Componente para:	Pc/server
Altura del paquete principal (exterior):	385 mm
Ancho del embalaje principal (exterior):	605 mm
Longitud del paquete principal (exterior):	325 mm
Cantidad por caja principal (exterior):	80 stuk(s)
MDIX automático IEEE:	Ja
Activación de la LAN:	Ja
Temperatura de funcionamiento (TT):	0 - 55 °C
Humedad relativa de funcionamiento (VV):	5 - 90 procent
Marcos gigantes:	9000
versión PCI:	2.0
etiquetado VLAN:	Ja
Soporte de perfil bajo:	Ja