Golden Lighting Torbellino 8106-9 CDB Manual de Usario
Golden Lighting
Lámpara
Torbellino 8106-9 CDB
Lee a continuación 📖 el manual en español para Golden Lighting Torbellino 8106-9 CDB (3 páginas) en la categoría Lámpara. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/3
Canopy 1ea Mounting
Screws 2ea Top loop 1ea
Chain 6ft Threaded ring 1ea Wire connectors 2ea
Chain connector 2ea Canopy loop 1ea Nipple 1ea
Mounting Strap 1ea Hex Nut 1ea Finial 1ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad nish)
Comments
F A IIXTURE SSEMBLY NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: INSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
1. Feed the xture wires through the Top loop (J)
and pull the wires until taut.
2.Then screw the Top Loop (J) to the top of Frame
(K) until tight.
8106-9 CDB
Read and review installation instruction sheet before
assembling the xture.
Fig 1
Notice: Please review the parts listing and check for all parts before assembling the xture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for
replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be lled out by retailer
PARTS & ASSEMBLY SHEET
This xture assembled PO:__________ Date: ________
Fixture Name: Torbellino 8106-9 CDB
K
CHAIN
J
H
For Customer Service, contact the place of purchase to arrange for replacement parts.
8. By measuring determine correct number of links
needed for proper hanging height. Use a pair of
pliers to open one link of the Chain (C2) then
remove the excess Chain (C2) and discard it.
9. Use one chain connector(E2) to attach one end
of the chain to the Top loop (D2) and close the
chain connector.
10. Feed the xture wires through the Chain (every
three links) and pull the wires until taut.
11. Slip Canopy loop collar (B2) over the chain,
then do the same with the canopy (F2).
12. When ready to complete the installation Use the
other chain connector and attach the other end of
the chain to the canopy loop (A2) and close the
chain connector.
13. Make sure the weight of the chandelier is
supported by the chain-not the electrical wire.
* You may now install the xture.
Fig 3
3. Unscrew the Deco screws (L,M) from the
Frame (K) and save.
4. Several of the arms are already attached to the
Frame. Gently spread the remaining arms until
evenly spaced.
5. Align the hole in lower side of Frame arm (K) with
hole Frame (K). Secure in place with the Deco
screw (M).
6. Repeat with remaining arms both upper and
lower, secure with the Deco screws (L, M).
* NOTE: The Finial can be scratched or broken if
the full weight of the xture is placed on it. To avoid
damage attach Finial after hanging the xture.
7. Attach Finial (O) to the base of xture Frame (K)
by threading the Finial (O) onto the threaded rod
(N) until tight.
Fig 2
PARTS & ASSEMBLY SHEET
Fixture Name: Torbellino 8106-9 CDB
Note: Complete these remaining steps after the
xture is hung.
14. Place the Glass Shade (Q) over the Threaded
Socket (P),place the Socket washer (R) over the
threaded socket (P) then secure the Glass Shade
(Q) by threading by the Socket Ring (S) until tight.
15. Install the light bulbs in accordance with the
xture's specications.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING)
Fig 4
B2
A2
C2
E2
D2
E2
INSTALLATION INSTRUCTIONS
Fixture Name: Torbellino 8106-9 CDB
For Chandelier Light Fixture
13. Raise Canopy (G) to the ceiling and secure in place by
tightening the Canopy loop collar(H) into the Canopy Loop(F)
14. Install the light bulbs and glass shade as per the xture
assembly sheet.
YOUR INSTALLATION IS NOW COMPLETE.
RETURN POWER TO THE JUNCTION BOX
AND TEST THE FIXTURE.
For Customer Service, contact the place of purchase to arrange for replacement parts.
7. Unscrew the Canopy loop collar (H) from the Canopy loop.
Take the canopy and pass over the Canopy loop. approximatly
one half of the canopy loop exterior threads should be exposed.
Adjust until desired height is reached. *the Canopy loop collar
should t snugly on the Canopy loop after the canopy is
installed. Remove Canopy and Canopy lock collar.
8. Assemble the xture and have an assistant or secure support
hold the weight of the xture while you complete the wiring
connections.
9.Thread the xture wires and ground wire of the assembled
xture through the canopy loop and nipple and into the outlet
box.
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
HANGING THE FIXTURE (Fig.1)
1. Carefully remove the new xture from the carton and the
yellow bag that holds all parts. Check that all parts are included
as shown in the illustration and parts list.
2. Shut o the power at the circuit breaker and remove old
xture from ceiling, including the old mounting strap.
3. Thread Nipple(C) into Canopy Loop (F) until snug.
4. Thread other end of the Nipple (C) with Canopy Loop
attached into Mounting Strap (D).
5. Place Lock Washer (B) over end of Nipple (C) protruding
through Mounting Strap (D) and thread Hex Nuts (A) onto Nipple
until tight.
6. Take this mounting strap assembly and mount to ceiling
junction box with junction box Screws (E). Tighten screw
securely with screw driver.
Fig. 1
CONNECTING THE WIRES (Fig 2)
10. Attach the power supply wires to the xture lead wires by
connecting BLACK to BLACK (or SMOOTH) and WHITE to
WHITE (or RIBBED).
11. Attach the GROUND wire(GREEN or COPPER) from the
Junction Box and the xture Ground wire to the green Ground
Screw on the Mounting Bracket (D) or connect both wires
together using the correct size of wire connectors.
NOTE: Twist the wires together in the same direction you twist
the wire connector onto the wires.
12. Tuck these wire connections neatly into the Junction Box.
Fig. 2
G
CHAIN
J
H
F
E
D
JUNCTION BOX
(CEILING)
A
C
B
Especificaciones del producto
| Marca: | Golden Lighting |
| Categoría: | Lámpara |
| Modelo: | Torbellino 8106-9 CDB |
¿Necesitas ayuda?
Si necesitas ayuda con Golden Lighting Torbellino 8106-9 CDB haz una pregunta a continuación y otros usuarios te responderán
Lámpara Golden Lighting Manuales
1 Octubre 2024
1 Octubre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
19 Septiembre 2024
Lámpara Manuales
- Lámpara Sony
- Lámpara Samsung
- Lámpara IKEA
- Lámpara Philips
- Lámpara Honeywell
- Lámpara Canon
- Lámpara Alecto
- Lámpara Ansmann
- Lámpara Akasa
- Lámpara Silverline
- Lámpara Brennenstuhl
- Lámpara Workzone
- Lámpara BenQ
- Lámpara Ozito
- Lámpara Klarstein
- Lámpara Silvercrest
- Lámpara Nedis
- Lámpara Gembird
- Lámpara Innoliving
- Lámpara Livoo
- Lámpara Stanley
- Lámpara Crivit
- Lámpara Eglo
- Lámpara Lucide
- Lámpara OK
- Lámpara Hilti
- Lámpara Westinghouse
- Lámpara Kodak
- Lámpara Blaupunkt
- Lámpara Metabo
- Lámpara BeamZ
- Lámpara Logik
- Lámpara Trust
- Lámpara Carson
- Lámpara Elro
- Lámpara EMOS
- Lámpara Mesko
- Lámpara Hähnel
- Lámpara Silva
- Lámpara Hazet
- Lámpara Hama
- Lámpara Fenix
- Lámpara Theben
- Lámpara Velleman
- Lámpara Smartwares
- Lámpara Easymaxx
- Lámpara Steren
- Lámpara Hansa
- Lámpara Steinel
- Lámpara Livarno
- Lámpara Sanitas
- Lámpara Petzl
- Lámpara Black Diamond
- Lámpara Craftsman
- Lámpara Digitus
- Lámpara Nitecore
- Lámpara In Lite
- Lámpara Barco
- Lámpara Näve
- Lámpara Godox
- Lámpara Luceplan
- Lámpara Bresser
- Lámpara Olight
- Lámpara Elation
- Lámpara Sygonix
- Lámpara Runtastic
- Lámpara Steinhauer
- Lámpara Topeak
- Lámpara Zuiver
- Lámpara Konig
- Lámpara Chauvet
- Lámpara Flex
- Lámpara X4-Tech
- Lámpara HQ
- Lámpara Nanlite
- Lámpara Profoto
- Lámpara Trio Lighting
- Lámpara Ranex
- Lámpara Globo
- Lámpara Eurolite
- Lámpara August
- Lámpara Paul Neuhaus
- Lámpara Revo
- Lámpara Ibiza Sound
- Lámpara Impact
- Lámpara Avidsen
- Lámpara Lume Cube
- Lámpara Konig & Meyer
- Lámpara Ozone
- Lámpara ORNO
- Lámpara Toolcraft
- Lámpara Unilux
- Lámpara Aputure
- Lámpara Brandson
- Lámpara ARRI
- Lámpara Martin
- Lámpara Osram
- Lámpara Bolt
- Lámpara Duronic
- Lámpara Dorr
- Lámpara Ledlenser
- Lámpara Honeycomb
- Lámpara Elinchrom
- Lámpara Mission
- Lámpara Paulmann
- Lámpara Vimar
- Lámpara Dedra
- Lámpara Cameo
- Lámpara Kanlux
- Lámpara XQ-Lite
- Lámpara Wetelux
- Lámpara SLV
- Lámpara Sagitter
- Lámpara Elgato
- Lámpara Schwaiger
- Lámpara V-Tac
- Lámpara Neo
- Lámpara Gravity
- Lámpara Berger & Schröter
- Lámpara Apa
- Lámpara Prixton
- Lámpara Hatco
- Lámpara Goal Zero
- Lámpara Lutec
- Lámpara Karma
- Lámpara Livarno Lux
- Lámpara Neewer
- Lámpara Zafferano
- Lámpara Lightway
- Lámpara NUVO
- Lámpara Omnilux
- Lámpara Brilliant
- Lámpara Heitronic
- Lámpara NEO Tools
- Lámpara Angler
- Lámpara AccuLux
- Lámpara Luxform
- Lámpara Adviti
- Lámpara ArmyTek
- Lámpara Lalumi
- Lámpara Raya
- Lámpara Lupine
- Lámpara Rotolight
- Lámpara SIGOR
- Lámpara Maxim
- Lámpara Oecolux
- Lámpara Megatron
- Lámpara Integral LED
- Lámpara Casalux
- Lámpara Lowel
- Lámpara Airam
- Lámpara Sonoff
- Lámpara Lirio By Philips
- Lámpara Westcott
- Lámpara Gewiss
- Lámpara SecoRüt
- Lámpara Meross
- Lámpara Fabas Luce
- Lámpara Dainolite
- Lámpara Signature Design By Ashley
- Lámpara NightStick
- Lámpara Videx
- Lámpara Kartell
- Lámpara Louis Poulsen
- Lámpara Artecta
- Lámpara Fixpoint
- Lámpara Zadro
- Lámpara Kind LED
- Lámpara Waldmann
- Lámpara Hensel
- Lámpara Altman
- Lámpara Setti+
- Lámpara Jinbei
- Lámpara XCell
- Lámpara Perfect Christmans
- Lámpara Xline
- Lámpara ET2
- Lámpara Quoizel
- Lámpara Ridem
- Lámpara Fredrick Ramond
- Lámpara Crystorama
- Lámpara Sonneman
- Lámpara AFX
Últimos Lámpara Manuales
26 Octubre 2024
26 Octubre 2024
25 Octubre 2024
24 Octubre 2024
24 Octubre 2024
24 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024
23 Octubre 2024