Gorenje ECT 680 Manual de Usario

Gorenje horno ECT 680

Lee a continuación 📖 el manual en español para Gorenje ECT 680 (13 páginas) en la categoría horno. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/13
Instructions for use, mounting and connection
16
Built-in ceramic-glass cooktop GB IE MT
Dear customer !
The built-in ceramic-glass cooktop is intended for household
use only.
Materials used for packaging are nature friendly and may be
recycled, deposited or destroyed without any threats to the
environment.
In order to recognize these features, all packing materials are
marked with relevant symbols.
Once your appliance has become obsolete and you do not
intend to use it any longer, take adequate care not to litter the
environment. Deposit your old appliance with the authorized
depot dealing with used household appliances.
Instructions for use
Instructions for use have been prepared for the user, and
describe the particulars and handling of the appliance. These
instructions apply to different models from the same family of
appliances, therefore you may find information and
descriptions that may not apply to your particular appliance.
Installation instructions
The appliance should be connected to the power supply in
accordance with the instructions from the chapter "Electrical
connections" and in line with the standing regulations and
standards.
The connections should be carried out by a qualified personnel
only.
Rating plate
The rating plate with basic information is located underneath
the appliance.
Fire hazard protection
Appliances are allowed to be mounted on one side next to a
high kitchen cabinet, the height of which may exceed that of
the appliance. On the opposite side however, only a kitchen
cabinet of equal height as the appliance is allowed.
Important warnings...................................................... 16
Connection to the power 17supply ..................................
Basic adjustment of sensors to the ambience
Installation diagram
Mounting the built-in 18cooktop.....................................
Caution !
Dimensions of the built-in hob opening
Installation procedure
Ceramic-glass cooktop ................................................. 19
Cookware ...................................................................... 19
Energy saving tips
Glass ceramic hob control 20elements ............................
Control panel
Control elements
Automatic cooking mode
Blocking the hob operation
Timer function
Limited time of operation
Safety functions and error display
Cooker controls .............................................................24
Control panel
Control elements ...........................................................25
Switching the hob on
Selecting the particular hotplate
Switching the hotplate on
Automatic cooking mode
Blocking the hob operation
Remaining heat indicators
Switching the entire hob off
Limited operation time
Power interruption
Safety warnings and error indication
Cleaning and maintenance of ceramic-glass hob........27
Technical information...................................................28
Important warnings
• The appliance may be built-in and connected to the power
supply only by a qualified technician.
• Particular areas of the cooktop surface (adjacent to the
hotplates) are hot during operation. Prevent the children to
hang around the appliance and warn them properly against
the danger of burns.
• Hot oil ignites readily, so be sure have the preparation of
such food (fries) under constant control.
• Hotplates may not be left in operation empty, without any
dishes on top.
• Never use the appliance for heating the ambience.
• Never use the ceramic-glass cooktop as a working surface.
Sharp objects may damage the cooktop surface.
• Preparation of food in aluminum or plastic cookware is not
allowed. Never place any plastic objects or aluminum foil
upon the cooktop surface.
• In case any other appliances are plugged in the electric
mains close to the cooktop, prevent the contact of the plug
cable with the hot cooking zones.
• Never keep any flammable or temperature sensitive objects,
like cleaning agents, sprays, detergents, etc., below the
appliance.
• Never use cracked or broken ceramic-glass cooktop. In case
you notice any visible cracks on the surface, cut the power
supply immediately.
• In case of any malfunctions, disconnect the appliance from
the power supply and call service department.
• Do not use high-pressure steam cleaner or hot steam to
clean the appliance.
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment and
human health, which could otherwise be caused by
inappropriate waste handling of thisproduct. For more
detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the
product.
Instructions for use, mounting and connection 17
Connection to the power supply
• Connections may be carried out by a qualified technician only.
The earthing protection must comply with the standing
regulations.
• Connection terminals are revealed when the connection box
cover is removed.
• Prior any attempted connection check that the voltage indicated
on the rating plate is in line with your home power supply.
• The rating plate is located underneath the appliance.
• The appliance is manufactured for use with the power supply
voltage AC 230 V.
• The electric wiring should be equipped with a circuit breaker able
to isolate the appliance from the mains in all points, with the
distance between terminals of at least 3 mm in open position.
This may be done by means of fuses, safety switches, etc.
• The connection should be selected in accordance with the
declared charge capacity of the mains and the fuse power.
• Such appliances are allowed to be mounted on one side next to
a high kitchen cabinet, the height of which may exceed that of
the appliance. On the opposite side however, only a kitchen
cabinet of equal height as the appliance is allowed.
• Upon the completion of installation, live wires and isolated cables
must be adequately protected against accidental touching.
• Distance between the cooktop surface and the cooking hood
must be such as indicated in the instructions for use of the hood.
• Kitchen cabinets may not be mounted underneath the built-in
ceramic-glass cooktop.
Basic adjustment of sensors to the ambience
Upon each connection to the power supply the sensors of the
appliance are automatically adjusted to the environment to
ensure their proper function. All displays indicate the sign "-".
Once the successful adjustment is completed it is signaled with
a beep, all displays are switched off and your cooktop is ready
for use.
During the adjustment procedure the sensors must be free of
any objects, otherwise the adjustment procedure will be
interrupted until such objects are removed from the sensor
surface. During this period the regulation of the cooktop is
impossible.
ATTENTION !
Before attempting any repairs on the appliance, disconnect the
power supply. In accordance with the mains voltage the
appliance should be connected in line with the attached
diagram. The earthing wire (PE) must be connected to the
terminal marked with the earthing symbol .
The connection cable must lead through the relief safety
device, protecting it from accidental pulling out.
Upon the completion of installation switch all the hotplates on
for about 3 minutes to check the proper functioning.
Installation diagram
NOTE
In some connection boxes the connector bridges are placed between contacts 4 and 5, and in the others they are stored at a
designated place within the box. These boxes have the connection screws already in open position so they need not be unscrewed.
Connection may be carried out by means of:
− rubber coated connection cables, model H05 RR-F 4x1,5 with yellow-green earthing cable;
− PVC insulated connection cables, model H05 VV-F 4x1,5 with yellow-green earthing cable; or
− any other suitable cables.
Instructions for use, mounting and connection
18
Mounting the built-in cooktop
Caution !
• To avoid any possible hazard, the appliance may be
installed by qualified personnel only.
• Panels and furniture lining of the kitchen cabinet receiving
the hob must be treated with temperature resistant
adhesives (100°C), otherwise they might be discoloured or
deformed because of inadequate temperature resistance.
• The cooking hob is intended for building into the worktop
above the kitchen element of 600 mm width or more.
• After the installation of built-in hob make sure that there is
free access to the two fixing elements in front.
• Suspended kitchen elements above the cooktop must be
installed at such distance to provide enough room for
comfortable working process.
• The distance between the worktop and the hood must be at
least such as indicated in the instructions for installation of
the kitchen hood, but in no case it may be less than 650
mm.
• The smallest distance between the edge of the appliance
and the adjacent high kitchen cabinet is 40 mm.
• The use of hard wood decorative borders around the
worktop behind the appliance is allowed, in case the
minimum distance remains as indicated on the installation
illustrations.
• Minimum distance between the built-in cooktop and rear wall
is indicated at the illustration for the installation of the built-in
cooktop.
• The appliance may be installed in any worktop with a
thickness from 30 mm to 50 mm.
• In case there is a drawer in kitchen cabinet under the built-in
hob, it is necessary to install an additional horizontal barrier
of height 6 cm under the hob and above the drawer
Dimensions of the built-in hob opening
Installation procedure
• Worktop must be placed absolutely horizontal.
• Suitably protect the edges of the cut aperture.
• By means of the supplied screws 4 (or 6 by some models)
fasten the supplied tightening brackets 4 (or 6 by some
models) fasten to the front and the rear side of the cooking
hob and to the prepared aperture.
• Connect the cooking hob to the mains power supply (see
instructions for the connection of the cooking hob to mains
power supply).
• Insert the hob into the cut aperture.
• Press the hob firmly towards the worktop from above.

Especificaciones del producto

Marca: Gorenje
Categoría: horno
Modelo: ECT 680

¿Necesitas ayuda?

Si necesitas ayuda con Gorenje ECT 680 haz una pregunta a continuación y otros usuarios te responderán


horno Gorenje Manuales

Gorenje

Gorenje BO71ORAX Manual de Usario

13 Octubre 2024
Gorenje

Gorenje BOP747ST Manual de Usario

11 Octubre 2024
Gorenje

Gorenje ECT 680 Manual de Usario

2 Octubre 2024
Gorenje

Gorenje EC605ASC Manual de Usario

2 Octubre 2024
Gorenje

Gorenje GI53378AX Manual de Usario

1 Octubre 2024
Gorenje

Gorenje ECT 750 Manual de Usario

1 Octubre 2024
Gorenje

Gorenje E6151WA Manual de Usario

1 Octubre 2024
Gorenje

Gorenje BO6615E01B Manual de Usario

29 Septiembre 2024
Gorenje

Gorenje ECT680CSC Manual de Usario

27 Septiembre 2024
Gorenje

Gorenje EC 7304 W Manual de Usario

27 Septiembre 2024

horno Manuales

Últimos horno Manuales

Continental Edison

Continental Edison CECM6065W Manual de Usario

27 Octubre 2024
Taurus

Taurus HM778WHD Manual de Usario

27 Octubre 2024
Lacanche

Lacanche CITEAUX Manual de Usario

27 Octubre 2024
JennAir

JennAir JDS1450FS Manual de Usario

27 Octubre 2024
Orima

Orima ORP-76-IN Manual de Usario

27 Octubre 2024
Breville

Breville the Handy Hot Plate BHP150 Manual de Usario

27 Octubre 2024
JennAir

JennAir JGRP436HL Manual de Usario

27 Octubre 2024
Neff

Neff C17MS22G1 Manual de Usario

27 Octubre 2024
Pit Boss

Pit Boss BK24 Manual de Usario

27 Octubre 2024
Guzzanti

Guzzanti GZ-8206 Manual de Usario

27 Octubre 2024