Grandstream GXP2130 v2 Manual de Usario

Grandstream telefono GXP2130 v2

Lee a continuación 📖 el manual en español para Grandstream GXP2130 v2 (1 páginas) en la categoría telefono. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/1

Grandstream

GXP2130/2140/2160/2135/2170

IP Phone

Quick User Guide

Basic Phone Operation

For detailed information please

consult the GXP2130/2140/2160/2135/2170

User Manual

available at:

www.grandstream.com

reserved.

Reproduction or transmittal of the entire or any

part, in any form or by any means, electronic or

print, for any purpose without the express

written permission of Grandstream Networks,

Inc. is not permitted. Information in this

document is subject to change without notice.

USING THE HEADSET OR SPEAKER

1) Use the Speaker Button to turn

speaker ON/OFF.

2) Use the Headset button to use

the headset once it had been connected.

MAKING A CALL

1) Take Handset/Headset off hook or press -

Speaker button or an available LINE key

(activates speakerphone) .

2) The line will have dial tone and the

corresponding line’s LED will turn green.

3) If you wish, select another LINE key

(alternative SIP account).

4) Enter the phone number.

5) Press the SEND button or press

the “DIAL” soft key.

REDIAL

1) Take the phone off hook.-

2) Press the SEND button or press

the “REDIAL” soft key.

Note: The phone will redial using the

same SIP account as was used for the last

call.

ANSWERING CALLS

Single Incoming Call:

1) Answer call by taking Handset/Headset

off hook or pressing SPEAKER or by

pressing the corresponding account LINE

button.

Multiple Incoming Calls:

1) When there is a call waiting, users will

hear a Call Waiting tone .

2) The next available line will flash red.

3) Answer the incoming call by pressing its

corresponding LINE button.

4) The current call will be put on hold.

5) Toggle between the calls using the LINE

button.

ENDING A CALL

End a call by pressing the “EndCall” soft key

or hang up the phone.

CALL HOLD/RESUME

1) Hold: Place a call on ‘hold’ by pressing

the hold button.

2) Resume: Resume call by pressing the

corresponding blinking LINE.

CALL TRANSFER

Assuming that you are in a call and wish to

transfer the call to another party.

Blind Transfer:

1) Press transfer button.

2) Dial the number and press the send button

to complete transfer of active call.

Attended Transfer:

1) Press an idle line key to make a new call and the

active LINE will be placed on hold automatically.

2) Once the call is established, press transfer

button followed by the LINE button of the held line to

transfer the call.

3) After the call is transferred, phone will display idle

screen.

Auto Attended Transfer:-

1) Set "Auto Attended Transfer" to "Yes" on Web -

GUI.

2) Establish one call first.

3) Press transfer key to bring up a new line,

and the first call will be placed on hold automatically.

4) Dial the number and press SEND button

to make a second call.

5) Press transfer key again to make the transfer.

Note: For Auto Attended Transfer, after dialing out -

the number for the second call, a “Split” soft key will

show. If the second call is not established yet

(ringing), pressing “Split” will hang up the second

call. If the second call is established (answered),

pressing “Split” will resume the second call and keep

the first call on hold.

3 WAY CONFERENCE-

Initiate a Conference Call:

Assuming that you are already in a conversation and

wish to bring a third party together in a 3 way -

conference.

1) Press conference button to bring

up conference dialing screen.

2) Dial the third party number followed by

SEND key.

3) When the call is established to the third

party, press the “ConfCall” soft key to initiate 3

- way conference.

Cancel a Conference Call:

1) Press “Cancel” soft key in conference

dialing screen to resume the two way -

conversation.

Hold The Conference:

1) Press hold button to hold the

conference call with all parties are on hold;

2) Press “ReConf” soft key to resume

conference call; or select the corresponding

blinking LINE to speak with an individual party.

End The Conference:

The conference will be terminated for all three

parties if the conference initiator hangs up or

presses “EndCall” soft key.

VOICEMAIL MESSAGE

A blinking red MWI (Message Waiting

Indicator) indicates a message is waiting.

1) Press the Message button to retrieve the

message. An IVR will prompt the user

through the process of message retrieval.

2) Press a specific LINE to retrieve messages

for a specific line account.

Note: Each account requires a voicemail

portal number to be configured in the

“voicemail user id” field.

MUTE/DELETE

1) Press the MUTE button to mute/

unmute the microphone.

2) The Mute icon indicates whether the

microphone is muted.

VOLUME ADJUSTMENTS

Use the volume button to

adjust the ring volume when the phone is idle.

Press the volume button during an active call

to adjust the call volume.

Especificaciones del producto

Marca:	Grandstream
Categoría:	telefono
Modelo:	GXP2130 v2
Ancho:	170 mm
Profundidad:	170 mm
red LAN:	Ja
Tipo de fuente de energía:	ATX
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	2
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Zócalo del procesador:	LGA 1151 (Socket H4)
Fabricante del procesador:	Intel
Memoria interna máxima:	32 GB
Canales de salida de audio:	7.1 kanalen
Compatible con Linux:	Ja
placa base con chipset:	Intel® Q170
Tipo de ranura de memoria:	DIMM
Canal de memoria:	Dubbelkanaals
Ranuras PCI Express x4:	1
Componente para:	PC
Número de conectores SATA III:	2
No ECC:	Ja
Procesadores compatibles:	Intel Celeron, Intel Pentium
Tipos de memoria soportados:	DDR4-SDRAM
Familia de chipsets de placa base:	Intel
Factor de forma de la placa base:	ATX
Número de ranuras de memoria:	2
Velocidades de reloj de memoria admitidas:	2133 MHz
tipo de BIOS:	UEFI AMI
Tamaño de la memoria del BIOS:	128 Mbit
Versión ACPI:	5.0
Conexión para refrigerador de CPU:	Ja
Conector del panel frontal:	Ja
Conexiones USB 2.0:	2
Conexión para panel de audio en el frente:	Ja
Memoria sin búfer:	Ja
Puerto paralelo a través de encabezado interno:	Ja
Conector TPM:	Ja
Salida-S/PDIF:	Ja
Conector de alimentación EPS (8 pines):	Ja
Capacidades de módulos de memoria admitidas:	4GB
Borrar puente CMOS:	Ja
Puerto serie a través de encabezado interno:	Ja