Hamlet HBCS2D100W Manual de Usario

Hamlet Lector de código de barras HBCS2D100W

Lee a continuación 📖 el manual en español para Hamlet HBCS2D100W (8 páginas) en la categoría Lector de código de barras. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

MANUAL SUCCESSIVE SCAN

AUTO-CONDUCTION TRIGGER COMMAND

ENTER* ENTER AND LINE

TAB NONE

NORMAL

ILLUMINATION*

CONTINUOUS

LIGHT MODE

SCAN MODE

SUFFIX SETTINGS

ILLUMINATION AND AIM

SLEEP TIME SETTINGS

ENTER SLEEP

TIME SETTING

SAVE SLEEP

TIME PARAMETER

1. Scan “Enter Sleep Time Setting” QR code.

2. Set sleep time parameter (Unit: minutes).

Example: To set sleep time 10 minutes, scan sleep

time number “0”, “1” and “0” in sequence.

Note: Sleep time can be from 1 to 999 minutes,

consinsting of 3 digits, followed by one hundred, ten,

a bit. Each set of sleep time must be 3 digits number.

3. Scan “Save Sleep Time Parameter”.

Note: After setting the sleep time parameter, it must

be saved. If set error, the scanner will give an alarm

and you need to set it again.

Under data uploading mode, the purple led indicator

keeps flashing when uploading data.

Under invetory mode, the red led indicator keeps on

when uploading data.

Under over-distance storage mode, the red led

indicator keeps flashing when uploading data.

When battery power is too low, the scanner makes

“beep” every 10 seconds. After 5 “beep” sounds, the

scanner turns off automatically.

When the scanner is in over transmission distance

condition, connect the scanner to the receiver and

press trigger button to upload data to the receiver. But

data will not be uploaded to a cell phone.

When the scanner is in inventory mode, it will not go

into over-distance storage mode.

Note: To return to Factory Default settings, scan

“Factory Default”, “RF Setting” and “Bluetooth Mode”

QR codes in sequence.

1. Connect the USB receiver to the computer.

2. Scan below QR code or “Disconnect” QR code on

the receiver.

3. Scan “Connect” QR code on the receiver and wait

few seconds to complete pairing.

Note: Purple led indicates pairing succeed.

INTRODUCTION

One Scanner To One Receiver

Open Android or iOs devices

bluetooth and search for bluetooth

devices after scanning this barcode,

then connect to the bluetooth

device.

Connect To Mobile Device

In iOS, if keyboard is on, scan this

code to turn off the keyboard.

If keyboard is off, scan this code to

turn on the keyboard.

Keyboard ON/OFF in iOS

UPLOAD ALL DATA

CLEAR ALL

DATA

UPLOAD

STATISTIC DATA

QUIT

INVENTORY MODE

ENTER

INVETORY MODE

INVENTORY MODE

HBCS2D100W

www.hamletcom.com

BLUETOOTH INDUSTRIAL BARCODE

SCANNER FOR LINEAR AND QR CODES

USER MANUAL

2D BARCODE SCANNER

Dear Customer,

thanks for choosing an Hamlet product. Please

carefully follow the instructions for its use and

maintenance and, once this item has run its life

span, we kindly ask You to dispose of it in an environmen-

tally friendly way, by putting it in the separate bins for

electrical/electronic waste, or to bring it back to your

retailer who will collect it for free.

We inform You this product is manufactured with

materials and components in compliance with RoHS

Directive 2011/65/EU, WEEE Directive 2002/96/CE,

2003/108/CE Italian Legislative Decree 2005/151 and

RED Directive 2014/53/EU for the following standards:

EN 60950-1: 2006 + A2: 2013

EN 62479: 2010

EN 301 489-1 V1.9.2

EN 301 489-17 V2.2.1

EN 300 328 V1.8.1

CE Mark Warning

This is a Class B product. In a domestic environment, this

product may cause radio interference, in which case the

user may be required to take adequate measures.

The complete CE declaration of conformity of the product

can be obtained by contacting Hamlet at

info@hamletcom.com.

Visit www.hamletcom.com for complete information on

Hamlet products and to access downloads and technical

support.

Imported by:

CARECA ITALIA SPA - Scandiano (RE) . Italy

All trademarks and company names mentioned in this

manual are used for description purpose only and remain

property of their respective owners. The material in this

document is for information only. Contents, specifications

and appearance of the product are indicative and may

change without notice.

LED Devices

Hamlet products using led sources comply with IEC

60825-1, EN 60825-1: 2014. The led classification is

marked on one of the labels on the product. Class 1 Led

devices are not considered to be hazardous when used

for their intended purpose.

The following statement is required to comply with US

and international regulations:

Caution: Use of controls, adjustments or performance of

procedures other than those specified herein may result

in hazardous led light exposure.

Class 2 Led scanners use a low power, visible light diode.

As with any very bright light source, such as the sun, the

user should avoid staring directly into the light beam.

Momentary exposure to a Class 2 Led is not known to be

harmful.

In accordance with Clause 5, IEC 60825 and EN 60825,

the following information is provided to the user:

CLASS 1: CLASS 1 LED PRODUCT

CLASS 2: VISIBLE LED RADIATION

DO NOT STARE INTO BEAM

CLASS 2 LED PRODUCT

RF SETTINGFACTORY

DEFAULT

OVER-DISTANCE

STORAGE OFF

OVER-DISTANCE

STORAGE ON

BLUETOOTH

MODE

NO ILLUMINATION

SUFFISSO PERSONALIZZATO

Scansionare “Modifica Prefisso” quindi il codice che

si desidera aggiungere. L’utente può personalizzare il

contenuto del prefisso.

BUZZER

NUMBERS APPENDIX

SPAINJAPAN

ITALY*

HUNGARY

GERMANYFRENCH

CZECH

USA

0 1

2 3

4 5

6 7

8 9

A B

C D

E F

2 3

0 1

8 9

5 MIN 10 MIN

30 MIN NONE

4 5

6 7

SAVE

DELETE ONE DATA

BEFORE READ

DELETE A STRING OF

DATA BEFORE READ

CANCEL SETTINGS

ADD SUFFIX

MODIFY SUFFIX

DELETE SUFFIX*

MODIFY PREFIX SAVE PREFIX

SAVE SUFFIX

CUSTOM PREFIX SETTING

To setup the following sleep time, just scan the QR

code with desired sleep time.

Special Sleep Time Setting

CUSTOM SUFFIX SETTING

USB KEYBOARD COUNTRY

ADD PREFIX DELETE PREFIX

To set a custom Prefix proceed as follows.

1. Scan “Add Prefix” > “Modify Prefix”.

2. Scan the Data Code* in the “Numbers Appendix”

and then “Save”.

3. Scan “Save Prefix” to confirm setting.

* Data Code consists of an alphanumeric code.

To insert the desired Data Code, please refer to

Hexadecimal Encoding table in the complete user

manual available for download at hamletcom.com

website.

To set a custom Suffix proceed as follows.

1. Scan “Add Suffix” > “Modify Suffix”.

2. Scan the Data Code* in the “Numbers Appendix”

and then “Save”.

3. Scan “Save Suffix” to confirm setting.

* Data Code consists of an alphanumeric code.

To insert the desired Data Code, please refer to

Hexadecimal Encoding table in the complete user

manual available for download at hamletcom.com

website.

OFFON*

MID*HIGH

LOW

Especificaciones del producto

Marca:	Hamlet
Categoría:	Lector de código de barras
Modelo:	HBCS2D100W
Tipo de operación:	Touch
Color del producto:	Beige
Código de seguridad internacional (IP):	IPX5
Bluetooth:	Ja
Tiempo de reproducción de audio continuo:	10 uur
Versión Bluetooth:	5.3
Perfiles Bluetooth:	AAC, LDAC, SBC
Tecnología de conectividad:	Draadloos
Cables suministrados:	USB Type-C
Nombre del color:	Sunrise Beige
Carga rápida:	Ja
Guía de inicio rápido:	Ja
Tarjeta de garantía:	Ja
Reducción de ruido:	Ja
Número:	1
Método de uso:	In-ear
Uso recomendado:	Oproepen/muziek
Colocar los auriculares de los altavoces.:	Intraauraal
Rango de frecuencia de los auriculares:	20 - 40000 Hz
Rango de conexión:	10 m
tipo microfoon:	Ingebouwd
Batería/Tiempo de carga de la batería:	2 uur
Tiempo de reproducción de audio continuo (con base de carga/caja de almacenamiento):	40 uur
Funciones de seguridad:	Waterbestendig
Modo de juego:	Ja
Estación de carga:	Ja
Fuente de carga:	USB
Número de micrófonos:	6
Número de conductores:	2
Diámetro del altavoz:	11 mm
Tiempo de conversación:	5.5 uur
Tiempo de conversación (con base de carga/caja de almacenamiento):	20 uur
Número de dispositivos conectados simultáneamente (máx.):	2
Tipo de reducción de ruido:	Actief
Tiempo de carga rápido:	10 min
Tipo-producto:	Hoofdtelefoons
Micrófono con reducción de ruido:	Ja
Tocando musica:	Ja
Audio espacial personalizado:	Ja