Hartke 115XL Manual de Usario

Lee a continuación 📖 el manual en español para Hartke 115XL (4 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
1 x15Stackable
Aluminum Drive Bass Enclosure
Hartke
115XL Introduction and Features
Congratulations on purchasing the 115XL bass enclosure by Hartke! The XL
Series enclosures have been designed to provide excellent tone with a warm
punchy output. The 115XL features a 15”, proprietary low frequency driver with
an aluminum cone, impregnated fabric surround, and matched convex dust
cover all mounted in a heavy-duty steel frame. Using heavy-duty plywood con-
struction, covered in rugged carpet with recessed jack plate and ergonomic han-
dle, the 115XL will provide reliable performance from gig to gig and venue to
venue.
In these pages, you’ll find a detailed description of the features of the 115XL , as
well as a description of its front and rear panels, step-by-step instructions for its
setup and use and full specifications. You’ll also find a warranty card enclosed—
please don’t forget to fill it out and mail it in so that you can receive online tech-
nical support and so we can send you updated information about these and
other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the origi-
nal carton and packing materials.
115XL Features
1 x 15 Inch heavy-duty, Aluminum
Low Frequency driver
3/4" Plywood construction
Front Shelf Port
Perforated metal speaker grill
Recessed metal handles
Stacking corners
Dual, parallel wired 1/4" jacks
Covered in durable carpet
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little about
impedance. Impedance is the electronic load that the speaker puts on the power amplifier
and is measured in Ohms.
Here is the tricky, yet simple rule of impedance: When two speakers, of equal impedance
are wired in "Parallel", the total imped-
ance is cut in half and when two speak-
ers are wired in “Series,” the total
impedance is the sum of the speakers
individual impedance.
The 115XL impedance is 8 Ohms.
So, when two 115XL’s are connected
together in parallel, the total impedance
is 4 Ohms. The impedance of your
speaker also has an effect on your
amplifier. In general, the lower the
impedance, the more power your ampli-
fier will put out.
IMPORTANT: There is a minimum safe
impedance so be sure to check the
manufacturer’s recommended imped-
ance for your amplifier to avoid any
damage to your amplifier or voiding
your warranty.
Connecting the 115XL to Your Amplifier
The 115XL connections are made via
1/4” phone jacks located on the rear
panel jack-plate. Be sure to make your
connection with un-shielded speaker
cable. Connect the Amplifier Output to
the speaker Input on the 115XL’s rear
jackplate.
Using the EXTENSION Output
The 115XL provides a convenient
Extension Output for connecting addi-
tional speaker cabinets in parallel. Be
sure to read the section above on
impedance to insure a proper hook up
with your amplifier. Follow the steps
below to connect two 115XL ’s using
the Extension Output. Connect the
Amplifier Output to the Input of the first
115XL. Now, connect the Extension
Output to the Input of the second
115XL.
4.5XL BASS C ABINE T
400 WAT T S
Hartke
8 EXTENS IO N
INPUTS
MADE IN CHINA
S ERIAL N UMBER
Hartke S ys tems Dis tribut worldwide by Sa m s on Te chnologies
www.hartke .com
Har t ke Sys t e ms
Dis tributed Ex clus ively by
Samso n Technolo gies Co rp.
Hic ksville, New Y ork 11802
MOD EL 2000
200 WATTS
8
= 120 WA TTS
4
= 200 WA TTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-
ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK
HAZ ARD, DO NOT EXPOS E TO RAIN OR MOIS TURE.
ASSEMBLED IN R.O.K.
SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/2 50V, 180 W (115 V)
2.5A/2 50V, 450W (230V)
SP EAKER OUTPU TS
8
ON OFF
HPF
EFFE CT
SENDRETUIRN
8
Connecting the 115XL
4.5XL BASS C ABINE T
400 WAT T S
Hartke
8 EXT S ION
INPUTS
ADE IN CHIN A
S ERIAL N UMBER
Hartke S ys tems Dis tribut worldwide by Sa m s on Te chnologies
www.hartke .com
4.5XL BASS CABI ET
400 WAT T S
Hartke
PUTS
Hartke S ys tems Dis tribute d worldwide am s on Te chnologies
Har t ke Sys t e ms
Dis tributed Ex clus ively by
Samso n Technolo gies Co rp.
Hic ksville, New Y ork 11802
MOD EL 2000
200 WATTS
8
= 120 WA TTS
4
= 200 WA TTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-
ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK
HAZ ARD, DO NOT EXPOS E TO RAIN OR MOIS TURE.
ASSEMBLED IN R.O.K. SERIAL NUMBER
115
~ AC INPUT
115V/230V 50/60Hz
FUSE
5A/2 50V, 180 W (115 V)
2.5A/2 50V, 450W (230V)
SP EAKER OUTPU TS
8
ON OFF
HPF
EFFE CT
SENDRETUIRN
8

Especificaciones del producto

Marca: Hartke
Categoría: No categorizado
Modelo: 115XL

¿Necesitas ayuda?

Si necesitas ayuda con Hartke 115XL haz una pregunta a continuación y otros usuarios te responderán




No categorizado Hartke Manuales

No categorizado Manuales

Últimos No categorizado Manuales