Hartke 810XL Manual de Usario

Lee a continuación 📖 el manual en español para Hartke 810XL (4 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
8 x10Stackable
Aluminum Drive Bass Enclosure
Hartke
810XL Introduction and Features
Congratulations on purchasing the 810XL bass enclosure by Hartke! The XL
Series enclosures have been designed to provide excellent tone with a fast
attack, deep low-end and punchy output. The 810XL Features eight 10”, propri-
etary low frequency drivers with specially designed aluminum cones, large voice
coils on Kapton formers, impregnated fabric surrounds, and matched convex
dust covers all mounted in a heavy-duty steel frames. In order to reduce distor-
tion caused by standing waves, and to increase the overall output level, the
810XL enclosure has been designed with four separate chambers, each housing
two 10” drivers. Using heavy-duty plywood construction, covered in rugged car-
pet with recessed jack plate and ergonomic metal handles, the 810XL will pro-
vide reliable performance from gig to gig and venue to venue.
In these pages, you’ll find a detailed description of the features of the 810XL, as
well as a description of its front and rear panels, step-by-step instructions for its
setup and use and full specifications. You’ll also find a warranty card enclosed—
please don’t forget to fill it out and mail it in so that you can receive online tech-
nical support and so we can send you updated information about these and
other Samson products in the future.
We recommend you record your serial number in the space provided below for
future reference.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the original
carton and packing materials.
810XL Features
8 x 10 Inch heavy-duty, Aluminum,
Low Frequency drivers
3/4" Plywood construction
Four chamber, sealed enclosure
Perforated metal speaker grill
Recessed metal handles
Stacking corners
1/4" Input jack
Covered in durable carpet
Connecting the 810XL
About Impedance
Before you hook up your speaker cabinet, be sure that you understand a little about
impedance. Impedance is the electronic load that the speaker puts on the power amplifier
and is measured in Ohms.
Here is the tricky, yet simple rule of impedance: When two speakers are wired in "Parallel"
the total impedance is cut in half and
when two speakers are wire in Series”
the total impedance is the sum of the
speakers individual impedance.
The 810XL impedance is 4 Ohms. So,
when two 810XL’s are connected
together in parallel, the total impedance
is 2 Ohms. The impedance of your
speaker also has an effect on your
amplifier. In general, the lower the
impedance, the more power your ampli-
fier will put out.
IMPORTANT: There is a minimum safe
impedance so be sure to check the
manufacturer’s recommended imped-
ance for your amplifier to avoid any
damage to your amplifier or voiding
your warranty.
Connecting the 810XL to Your Amplifier
The 810XL connections are made via
1/4” phone jack located on the rear
panel jack-plate. Be sure to make your
connection with un-shielded speaker
cable. Connect the Amplifier Output to
the speaker Input on the 810XL’s rear
jackplate.
Har t ke Sys t e ms
Distributed Exclusively by
Samso n Technolo gies Co rp.
Hicksv ille, New York 11802
MOD EL 2000
200 WATTS
8
= 120 WATTS
4
= 200 WATTS
CAUTION
TO PREVENT SHOCK, DO NOT OPEN. NO US ER S ERVICE-
ABLE PARTS INS IDE. REFER S ERVICING TO QUALIFIED
SERVICE PERSONNEL. TO PREVENT FIRE OR S HOCK
HAZ ARD, DO NOT EXPOS E TO RAIN OR MOISTURE.
ASSEMBLED IN R.O.K. SERIAL NUMBER
115
~ AC INPUT
115 V/230V 5 0/60 Hz
FUSE
5A/2 50V, 180 W (115 V)
2.5A/2 50V, 450W (230V)
SP EAKER OUTPU TS
8
ON OFF
HPF
EFFE CT
SENDRETUIRN
4

Especificaciones del producto

Marca: Hartke
Categoría: No categorizado
Modelo: 810XL

¿Necesitas ayuda?

Si necesitas ayuda con Hartke 810XL haz una pregunta a continuación y otros usuarios te responderán




No categorizado Hartke Manuales

No categorizado Manuales

Últimos No categorizado Manuales