Hatco DCS400-1 Manual de Usario

Hatco Lámpara DCS400-1

Lee a continuación 📖 el manual en español para Hatco DCS400-1 (28 páginas) en la categoría Lámpara. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/28
Decorative Carving Stations
Stations de découpage décoratives
DCS Series Série DCS
Installation and Operating Manual
Manuel d'installation et d'utilisation
P/N 07.04.493.00
© 2014 Hatco Corporation
Do not operate this equipment unless you
have read and understood the contents of
this manual! Failure to follow the
instructions contained in this manual may
result in serious injury or death. This
manual contains important safety
information concerning the maintenance,
use, and operation of this product. If
you’re unable to understand the contents
of this manual, please bring it to the
attention of your supervisor. Keep this
manual in a safe location for future
reference.
English = p 2
No opere este equipo al menos que haya
leído y comprendido el contenido de este
manual! Cualquier falla en el seguimiento
de las instrucciones contenidas en este
manual puede resultar en un serio lesión
o muerte. Este manual contiene
importante información sobre seguridad
concerniente al mantenimiento, uso y
operación de este producto. Si usted no
puede entender el contenido de este
manual por favor pregunte a su
supervisor. Almacenar este manual en
una localización segura para la referencia
futura.
Ne pas utiliser cet équipement sans avoir
lu et compris le contenu de ce manuel !
Le non-respect des instructions
contenues dans ce manuel peut entraîner
de graves blessures ou la mort. Ce
manuel contient des informations
importantes concernant l'entretien,
l'utilisation et le fonctionnement de ce
produit. Si vous ne comprenez pas le
contenu de ce manuel, veuillez le signaler
à votre supérieur. Conservez ce manuel
dans un endroit sûr pour pouvoir vous y
référer plus tard.
Français = p 14
WARNING
ADVERTENCIA
AVERTISSEMENT
Register Online!
(see page 2)
S'inscrire en ligne!
(voir page 14)
hatcocorp.com
2Form No. DCSM-0214
CONTENTS
English
Important Owner Information ..............................................2
Introduction...........................................................................2
Important Safety Information...............................................3
Model Description.................................................................4
Model Designation................................................................5
Specifications........................................................................6
Plug Configurations ............................................................6
Electrical Rating Chart........................................................6
Dimensions.........................................................................6
Installation.............................................................................8
General...............................................................................8
Installing Countertop Mounted Models...............................8
Operation...............................................................................9
General...............................................................................9
Maintenance ........................................................................10
General.............................................................................10
Daily Cleaning ..................................................................10
Cleaning the Stone Surface .............................................10
Replacing a Heat Bulb .....................................................10
Troubleshooting Guide.......................................................11
Options and Accessories...................................................12
Hatco Limited Warranty .....................................................13
Authorized Parts Distributors............................Back Cover
IMPORTANT OWNER INFORMATION
Record the model number, serial number (specification label
located on the bottom of the unit), voltage, and purchase date
of the unit in the spaces below. Please have this information
available when calling Hatco for service assistance.
Model No. ____________________________________
Serial No. ____________________________________
Voltage ______________________________________
Date of Purchase ______________________________
Register your unit!
Completing online warranty registration will prevent delay in
obtaining warranty coverage. Access the Hatco website at
www.hatcocorp.com, select the Parts & Service pull-down
menu, and click on “Warranty Registration”.
Business
Hours: 8:00 AM PMto 5:00 Central Standard Time (CST)
(Summer Hours: June to September
8:00 AM PMto 5:00 CST Monday Thursday
8:00 AM PMto 2:30 CST Friday)
Telephone: 800-558-0607; 414-671-6350
e-mail: partsandservice@hatcocorp.com
Fax: 800-690-2966 (Parts and Service)
414-671-3976 (International)
Additional information can be found by visiting our web site at
www.hatcocorp.com.
24 Hour 7 Day Parts and Service
Assistance available in the United States
and Canada by calling 800-558-0607.
INTRODUCTION
Hatco Decorative Carving Stations create an attractive and
functional carving display for restaurants, hotels, country clubs,
casinos, and caterers to hold and serve carving meats at proper
food-safe temperatures. Adjustable and stylish overhead heat
lamps combined with a heated stone base and stone cutting
board give chefs flexibility and control for a variety of products.
Decorative Carving Stations are quality built to meet the
demands of foodservice operations and provide years of
trouble-free performance.
Hatco Decorative Carving Stations are products of extensive
research and field testing. The materials used were selected for
maximum durability, attractive appearance, and optimum
performance. Every unit is inspected and tested thoroughly prior
to shipment.
This manual provides the installation, safety, and operating
instructions for Decorative Carving Stations. Hatco
recommends all installation, operating, and safety instructions
appearing in this manual be read prior to installation or
operation of a unit.
Safety information that appears in this manual is identified by the
following signal word panels:
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to
personal injury.
WARNING
CAUTION
NOTICE
Form No. DCSM-0214 3
IMPORTANT SAFETY INFORMATION
English
ELECTRIC SHOCK HAZARD:
Plug unit into a properly grounded electrical receptacle
of the correct voltage, size, and plug configuration. If
plug and receptacle do not match, contact a qualified
electrician to determine and install the proper voltage
and size electrical receptacle.
Turn OFF power switch, unplug power cord, and allow
unit to cool before performing any cleaning,
adjustments, or maintenance.
Never overload extension cord. Use heavy duty, three-
wire extension cord only. Make sure current carrying
capacity of extension cord complies with electrical
rating of unit.
DO NOT submerge or saturate with water. Unit is not
waterproof. Do not operate if unit has been submerged
or saturated with water.
Unit is not weatherproof. Locate unit indoors where
ambient air temperature is a minimum of 70°F (21°C).
Do not steam clean or use excessive water on unit.
This unit is not “jet-proof” construction. Do not use jet-
clean spray to clean this unit.
Do not pull unit by power cord.
Discontinue use if power cord is frayed or worn.
Do not attempt to repair or replace a damaged power
cord. The cord must be replaced by Hatco, an
Authorized Hatco Service Agent, or a person with
similar qualifications.
This unit must be serviced by qualified personnel only.
Service by unqualified personnel may lead to electric
shock or burn.
Use only Genuine Hatco Replacement Parts when
service is required. Failure to use Genuine Hatco
Replacement Parts will void all warranties and may
subject operators of the equipment to hazardous
electrical voltage, resulting in electrical shock or burn.
Genuine Hatco Replacement Parts are specified to
operate safely in the environments in which they are
used. Some aftermarket or generic replacement parts
do not have the characteristics that will allow them to
operate safely in Hatco equipment.
FIRE HAZARD:
Locate unit a minimum of 1″ (25 mm) from combustible
walls and materials. If safe distances are not
maintained, discoloration or combustion could occur.
Never overload extension cord. If extension cord feels
hot, turn off unit immediately and replace with cord that
has larger current carrying capacity.
EXPLOSION HAZARD: Do not store or use gasoline or
other flammable vapors or liquids in the vicinity of this or
any other appliance.
WARNING
Use only heat lamps that meet or exceed National
Sanitation Foundation (NSF) standards and are specifically
designed for food holding areas. Breakage of heat lamps
not specially protected could result in personal injury
and/or food contamination.
Hatco Corporation is not responsible for the actual food
product serving temperature. It is the responsibility of the
user to ensure that the food product is held and served at
a safe temperature.
Make sure all operators have been instructed on the safe
and proper use of the unit.
This unit is not intended for use by children or persons
with reduced physical, sensory, or mental capabilities.
Ensure proper supervision of children and keep them away
from the unit.
This unit has no “user-serviceable” parts. If service is
required on this unit, contact an Authorized Hatco Service
Agent or contact the Hatco Service Department at
800-558-0607 or 414-671-6350; fax 800-690-2966; or
International fax 414-671-3976.
BURN HAZARD: Some exterior surfaces on unit will get
hot. Use caution when touching these areas.
Locate unit at the proper counter height in an area that is
convenient for use. The location should be level to prevent
the unit or its contents from falling accidentally and strong
enough to support the weight of the unit and contents.
Damage to any countertop material caused by heat
generated from Hatco equipment is not covered under the
Hatco warranty. Contact the manufacturer of the
countertop material for application information.
Use non-abrasive cleaners on glass and metal surfaces.
Abrasive cleaners could scratch the finish of the unit,
marring its appearance and making it susceptible to soil
accumulation.
Clean unit daily to avoid malfunctions and maintain
sanitary operation.
WARNING
NOTICE
CAUTION
Read the following important safety information before using this equipment to avoid serious
injury or death and to avoid damage to equipment or property.

Especificaciones del producto

Marca: Hatco
Categoría: Lámpara
Modelo: DCS400-1

¿Necesitas ayuda?

Si necesitas ayuda con Hatco DCS400-1 haz una pregunta a continuación y otros usuarios te responderán




Lámpara Hatco Manuales

Lámpara Manuales

Últimos Lámpara Manuales