Hawke Nite-Eye 2000 Manual de Usario

Hawke No categorizado Nite-Eye 2000

Lee a continuación 📖 el manual en español para Hawke Nite-Eye 2000 (13 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/13
NITE-EYE 2000
3
OVERVIEW
• The Hawke Nite-Eye 2000 digital camera can be used for observation and photo/video capture in
complete darkness or low light conditions.
• View up to 200 meters in complete darkness using digital night vision technology.
• A built-in infrared illuminator provides additional light when in darker conditions. The infrared
strength can be adjusted to suit your situation.
• Quick and easy transfer of photos/videos and battery recharge via USB.
• Rechargeable 18650 lithium battery for extended performance and runtime.
BATTERY INSTALLATION
Unscrew the battery cover located underneath the front lens. Insert a 18650 battery, negative end
rst, then screw the battery cover back in place.
Notes:
• Only use 3.7V 18650 rechargeable batteries.
Ensure the battery has sufcient charge.
Ensure battery has been inserted negative end rst.
Ensure the battery is charged before rst use to increase life expectancy.
4
RECHARGING
The Nite-Eye 2000 is powered by a 18650 lithium battery. The battery can either be recharged in
the Nite-Eye 2000 unit, or separately if using a battery charger (not supplied).
• To charge the battery while installed in the camera, connect the power adaptor to the USB cable
and insert this into the mini-USB socket on the Nite-Eye 2000, located on the underside of the
unit, beneath the rubber ap.
• The LED charging indicator next to the mini-USB socket will glow red while the battery is
charging and turn off when it is fully charged.
• When recharging from mains power supply the Nite-Eye 2000 will automatically power on. If not
needed, the camera can be powered off by pressing and holding the ON/OK” button for 3 seconds.
• The Nite-Eye 2000 can also be charged by connecting directly to a computer via USB. In this
mode data transfer will also be available.
MEMORY CARD INSTALLATION
• The Nite-Eye 2000 accepts micro SD memory cards only.
• Memory card capacity between 2GB-32GB only.
• Install the micro SD memory card into the memory card socket located on the underside of the
unit, beneath the rubber ap.
Install micro SD memory card with exposed contacts rst and facing outwards.

Especificaciones del producto

Marca: Hawke
Categoría: No categorizado
Modelo: Nite-Eye 2000

¿Necesitas ayuda?

Si necesitas ayuda con Hawke Nite-Eye 2000 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Hawke Manuales

No categorizado Manuales

Últimos No categorizado Manuales