Heritage Audio RAM System 2000 Manual de Usario

Heritage Audio controlador RAM System 2000

Lee a continuación 📖 el manual en español para Heritage Audio RAM System 2000 (12 páginas) en la categoría controlador. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

RAM SYSTEM 2000 USER MANUAL

Jan 18th, 2018

Rev. 1.0, Firmware version V15

INSTALLING THE RAM SYSTEM 2000

Thanks for purchasing the RAM System 2000. Please make sure the following

items are in the box when you open it.

• This manual.

• RAM System 2000 main unit.

• Power Supply labelled HA- .PSU03

• Bluetooth antenna.

• IEC Cable.

Depending on your system requirements, you will need several TRS cables to

hook up your system. Please check your input sources and output

destinations and buy the correct cables.

Additionally, please insert the Bluetooth antenna in its threaded connector in

case it comes unplugged from the factory.

The power supply is of the auto switching type so it works worldwide without

adjusting anything. In case your country uses a different mains cable other

than the one provided in the box, just get the correct one and you are done.

Plugging the unit will display a welcome message and firmware unit´s

version. Please note that after turning on the unit, MUTE will always be

engaged regardless of the level shown on the red knob. This is to prevent

damage of your speakers due to excessive level on startup.

Any time you plug the unit on, the status of the RAM System will be that of

the last time it was turned off, so there is no need to reset preset levels or

talkback gain. Last input and output chosen is also stored.

GENERAL DESCRIPTION

The Heritage Audio RAM SYSTEM 2000 is a professional monitor controller in

a convenient tabletop format. With its matrix of inputs and outputs, covering

balanced and unbalanced analog, Spd and the innovative if digital

pro qualifessional ty HA Bluetooth technology, the System 2000 will cover all

the monitoring needs of the most demanding professional facilities at a price

never heard before.

The level control is taken care of by means of microprocessor controlled gold

plated relays, giving an exceptional resolution of 64dB of attenuation in 1dB

steps. Keeping active electronics to a minimum, the attenuator is buffered

using state of the art Burr Brown circuitry for negligible coloration and no

noise.

Headphone monitoring is as critical as main speaker is. Usually a weak part

even in the most expensive units, the RAM System 2000 employs very high

current drivers in a diamond buffer configuration which are able to drive any

headphones to very high levels without coloration or noise. mplifiers It has 2 a

individually configurable.

INPUT FEATURES

The RAM System 2000 has the following stereo inputs:

• INPUT 1: Balanced, accessible on a pair of TRS Jack connectors.

• INPUT 2: Exactly as Input 1.

• INPUT 3: Balanced by default, it can be configured as unbalanced -

10dBV by pressing SHIFT + IN3. The same key combination would

return this input to its balanced +4 configuration.

• DIGITAL: Transformer isolated, it is available on the RCA connector

on the back of the unit. It is able to read signals up to 24 bit/ 96Khz

and gets the word clock from the input . source

• BLUETOOTH: This input features the same architecture found in the

acclaimed Heritage -Audio BT 500. If you are not familiar with it, the

BT- 500 is an Audio Streaming device in a convenient 500 Series

format. It streams audio from your Bluetooth-equipped device and

Especificaciones del producto

Marca:	Heritage Audio
Categoría:	controlador
Modelo:	RAM System 2000
Color del producto:	Black, Blue
Peso.:	125000 g
Ancho:	518 mm
Profundidad:	959 mm
Altura:	1020 mm
Número de estantes:	6 schappen
El número de ruedas:	4 wiel(en)
Número:	1
Material del marco:	Staal
Ruedas:	Ja
Capacidad de carga del estante:	40 kg