Hifonics BXiPRO1.5 Manual de Usario

Hifonics Niet gecategoriseerd BXiPRO1.5

Lee a continuación 📖 el manual en español para Hifonics BXiPRO1.5 (10 páginas) en la categoría Niet gecategoriseerd. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/10

Operator’s Guide

BXiPRO1.5

Digital Bass Enhancement Processor

Thank you for purchasing the HIFONICS BXiPRO1.5 Digital Bass

Enhancement Processor. This unit has the ability to ne tuning bass

width and sweep for increased sound performance. Please read the

entire manual to ensure proper connections and application.

CAUTION

Always consider consulting a professional audio installer

before installing any audio components. Be careful and take

your time. Do not let wires make contact with metal edges or

hot engine components.

Features

• Enhances and restores the bass level

• Screw in power and speaker connecters to chassis for secure

connections that prevent disconnection

• Remote wire input, and output

• Mono adjustable output level (can be controlled by bass remote)

• Fine tuning adjustability using bass width and sweep

• Small prole

• Tiffany style RCA connectors

• Low level audio inputs

• Balanced differential inputs (for noise reduction).

Mounting and Hardware

Prior to mounting, connect the wires

to ensure proper operation.

MOUNTING

1. Select the desired mounting location that allows the unit to be

mounted on a at surface with room for connections.

2. Use the mounting brackets that are attached to the unit and use

the provided hardware for mounting the unit. Make sure there is

proper clearance for the mounting bracket screws when attaching

to selected location. Use caution to ensure there are no wiring

harnesses, mechanical or gas tanks under the location selected.

3. Route the power, ground and remote wires away from moving parts to

prevent pinching or shorting the wires. Also keep in mind of anything

that can creates excessive heat to avoid wires from detreating.

WIRING

1. : The power wire should connect to a constant or Power Wire

switched +12 volt source with a (1 Amp) provided in-line fuse. We

recommend that you use the radio constant or switch +12 volt source.

2. : Connect the ground wire to a clean chassis ground Gound Wire

point. Be sure to remove all paint and primer to expose clean metal.

Use a ring terminal and lock or star washer to secure the ground wire.

3. : The remote wire should be connected to the source Remote Wire

unit remote wire (amplier turn on or accessory wire) that provides

+12 volts when the source unit is “on” and 0 volts when the source

unit is turned “off”. (please note that some source unit’s antenna

connections will only show + 12 volts when AM/FM is selected

and 0 volts when other sources are selected).

Especificaciones del producto

Marca:	Hifonics
Categoría:	Niet gecategoriseerd
Modelo:	BXiPRO1.5
Peso.:	2720 g
Ancho:	125 mm
Profundidad:	262 mm
Altura:	43.8 mm
Código de seguridad internacional (IP):	IP20
Certificados de sostenibilidad:	RoHS
Potencia de salida:	480 W
Corriente de salida:	10 A
Abarcando:	48 V
voltaje-de-entrada-de-CA:	90 - 305 V