Hobart 4822 Manual de Usario

Lee a continuación 📖 el manual en español para Hobart 4822 (12 páginas) en la categoría picadora de carne. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobar tcorp.com F-35109 Rev. A (April 2014)
MODEL 4822 CHOPPER
ML-136125
ML-136126
– 2
© HOBART, 2014
Installation, Operation and Care of
MODEL 4822 CHOPPER
SAVE THESE INSTRUCTIONS
GENERAL
The 4822 Chopper uses a 11/2 horsepower motor. It will grind 16 lbs. per minute, rst cutting, through a
1/ " plate.8
The 4822 Chopper, with funnel-shaped cylinder, will grind 20 to 22 lbs. per minute, rst cutting, through
a 1/ " plate.8
Fig. 1
– 3
INSTALLATION
UNPACKING
Remove the carton from around the machine. Remove the four bolts holding the machine to the skid.
Unpack the chopper cylinder assembly.
Immediately after unpacking the chopper, check for possible shipping damage. If this machine is found to
be damaged after unpacking, save the packaging material and contact the carrier within 15 days of delivery.
Prior to installation, test the electrical service to make sure that it agrees with the speci cations on the
machine data plate.
The four leg assemblies (Fig. 1) are removed and packed in a separate carton for shipment. Unpack and
assemble these legs by screwing them into the four tapped holes of the frame. The rubber feet on these
legs cushion the machine. Under normal operation, the machine need not be bolted down.
ELECTRICAL CONNECTIONS
The electrical cord on this machine is equipped with a grounding- type plug which
must be connected to a properly grounded receptacle. If the receptacle is not the proper grounding
type, contact an electrician. Do not remove the grounding prong from the plug.
Choppers with three phase motors should be connected so that the hub drive runs counterclockwise
facing the cylinder assembly.
A check must be made to verify correct direction of rotation. Energize machine momentarily by turning
switch ON then OFF.
If rotation is incorrect, disconnect plug from electrical outlet, disassemble the plug and interchange any
two power leads (not the green ground lead). Then reassemble the plug and recheck.

Especificaciones del producto

Marca: Hobart
Categoría: picadora de carne
Modelo: 4822

¿Necesitas ayuda?

Si necesitas ayuda con Hobart 4822 haz una pregunta a continuación y otros usuarios te responderán




picadora de carne Hobart Manuales

Hobart

Hobart 4146 Manual de Usario

5 Septiembre 2024
Hobart

Hobart MG2032 Manual de Usario

5 Septiembre 2024
Hobart

Hobart 4246 Manual de Usario

5 Septiembre 2024
Hobart

Hobart 4822 Manual de Usario

5 Septiembre 2024
Hobart

Hobart 4732A Manual de Usario

5 Septiembre 2024
Hobart

Hobart 4812 Manual de Usario

5 Septiembre 2024
Hobart

Hobart 4732 Manual de Usario

5 Septiembre 2024

picadora de carne Manuales

Últimos picadora de carne Manuales