Horizon Fitness Oxford 6 Manual de Usario

Horizon Fitness Maquina Roei Oxford 6

Lee a continuación 📖 el manual en español para Horizon Fitness Oxford 6 (48 páginas) en la categoría Maquina Roei. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/48

OXFORD 3

OXFORD 6

3 ENGLISH

18 FRANÇAIS

33 ESPAÑOL

ENGLISH

SERIAL NUMBER LOCATION

ASSEMBLY

UNPACKING

Unpack the equipment where you will be using it. Place the carton on a level at surface. It is

recommended that you place a protective covering on your oor. Never open box when it is on its side.

IMPORTANT NOTES

During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded.

Several parts have been pre-lubricated to aid in assembly and usage. Please do not wipe

this off. If you have diculty, a light application of lithium grease is recommended.

TOOLS :INCLUDED

F6mm L-Wrench

F5mm L-Wrench

PARTS INCLUDED:

F1 Main Frame

F1 Front Stabilizer

F1 Seat Rail

F1 Rear Stabilizer

F1 Foot Pad Assembly

F1 Main Frame Cover

F1 Seat Frame Assembly

F1 Seat Rail End Cap

F1 Hardware Kit

WARNING!

There are several areas during the assembly process that special

attention must be paid. It is very important to follow the assembly

instructions correctly and to make sure all parts are rmly tightened. If

the assembly instructions are not followed correctly, the equipment could

have parts that are not tightened and will seem loose and may cause

irritating noises. To prevent damage to the equipment, the assembly

instructions must be reviewed and corrective actions should be taken.

NEED HELP?

If you have questions or if there are any missing parts,

contact Horizon Customer Tech Support.

Before proceeding, nd your

equipment’s serial number

located on a barcode sticker

and enter it in the space

provided below.

SERIAL NUMBER

MODEL NAME

FOXFORD 3 FOXFORD 6 HORIZON ROWER

* Use the information above when calling for service.

Especificaciones del producto

Marca:	Horizon Fitness
Categoría:	Maquina Roei
Modelo:	Oxford 6
Color del producto:	Wit
Peso.:	4100 g
Ancho:	148 mm
Profundidad:	185 mm
Altura:	250 mm
Peso del embalaje:	5600 g
Ancho del embalaje:	200 mm
Empaquetadura en profundidad:	414 mm
Altura del embalaje:	348 mm
Material de la carcasa:	MDF
Indicadores LED:	Ja
Control remoto:	IR
Tecnología de conectividad:	Bedraad
Lector de tarjetas de memoria integrado:	Nee
Energía promedio:	- W
Certificación:	RoHS, WEEE, CE/EMC, CE/LVD, FCC, SAA
Impedancia:	4 Ohm
Canales de salida de audio:	2.0 kanalen
Colocación de los altavoces:	Floor, Tabletop/bookshelf, Wall-mountable
altavoz de graves:	Ja
Rango de frecuencia:	80 - 16000 Hz
Sensibilidad:	85 dB
Controlado remotamente:	Ja
Tipo de altavoz:	2-weg
Amplificador:	Ingebouwd
Diámetro del altavoz de graves:	4 "
Diámetro hogetonenluidspreker:	1.5 "
tweeter:	Ja
voltaje-de-entrada-de-CA:	100 - 230 V
Consumo de energía (típico):	100 W
Baterias-incluidas:	Ja
Entradas de audio RCA:	1
3,5 mm en:	Ja
amplificador de potencia de salida:	60 W