Hunter HEPAtech Manual de Usario

Lee a continuación 📖 el manual en español para Hunter HEPAtech (24 páginas) en la categoría purificador de aire. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
41557-01 08/18/2010 ©2010 Hunter Fan Company
HEPAtech®
Air Purication System
Air Purier Model HEPAtech® Filter Pre-Filters
30057A, 30061 30928 30901
30067A, 30124A 30928 30901
www.hunterfan.com
Model 30067A, 30124AModel 30057A, 30061
ENGLISH
Page 2 ESPAÑOL
gina 9 FRANÇAIS
Page 17
2
41557-01 08/18/2010 ©2010 Hunter Fan Company
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS AIR
PURIFIER AND SAVE THESE IMPORTANT INSTRUCTIONS
1. This Air Purier is designed for use on a at, level surface and may not
work properly on an uneven surface. ALWAYS place this Air Purier
on a rm, level surface. ALWAYS place the Air Purier at least
six (6) inches away from walls and heat sources such as
stoves, radiators, or heaters.
2. Place the Air Purier in an area that is out of the reach of children.
3. Before using the Air Purier, extend the cord and inspect for any signs of
damage. use the product if the cord has been damaged.DO NOT
4. This product has a polarized plug (one blade is wider than the other) as
a safety feature. This plug will t into a polarized outlet only one way. If
the plug does not t fully into the outlet, reverse the plug. If it still does not
t, contact a qualied electrician. attempt to defeat or override DO NOT
this safety feature.
5. ALWAYS UNPLUG the Air Purier when it is not in operation, while
the lter is being changed, and while it is being cleaned.
6. tilt or move the Air Purier while it is in operation. Shut off DO NOT
and unplug before moving.
7. immerse the Air Purier in water as permanent damage DO NOT
will occur. Refer to and follow the CLEANING AND FILTER
REPLACEMENT instructions.
Introduction
Thank you for purchasing the HEPAtech® Air Purication System from Hunter
Fan Company. You have purchased our latest development in portable Air
Purication Systems. This system has been developed to improve the quality of
the air you breathe.
Our HEPAtech® Air Purication System out performs other air purication
systems by quickly and effectively removing dust, smoke, and pollen particles
as small as .1 microns in size. Room air is pulled in through the front grill and
cleaned across the HEPAtech® lter. Clean air is then released out the top grill
in order to avoid stirring up settled particles.
Using the Ionizer
Using the ionizer improves the quality of air in the room. Negative ions are
released into the air and positively charged dust, smoke, and pollen particles
are attracted to the negative ions. These particles settle out of the air and
can be vacuumed up during normal cleaning. These particles are also more
easily captured by the HEPAtech® lter as they pass through the HEPAtech®
Air Purication System. To ensure the best air circulation in the room, we
recommend that you place your air purier six inches away from any walls.
3
©2010 Hunter Fan Company 08/18/2010
Tabs for
opening the
front grill
HEPAtech®
Filter
Pre-Filter
Front
Grill
Figure 2 - Model 30067A, 30124A
Figure 3
Hook Tape
Grill Vents
Hook Tape
Front
Grill
Pre-Filter
HEPAtech®
Filter
Buttons for
opening the
front grill
Setting Up Your Air Purier
1. Remove your air purier from the box and take it out of the clear plastic
protective bag.
2. Place your HEPAtech® Air Purier on a rm, at oor.
3. Before turning the Air Purier ‘on,’ open the front grill.
For Model 30057A, 30061: To release the front grill, press the buttons
on the side until the front grill slides easily over the buttons. (Refer to Figure
1.)
To release the front grill, place your For Model 30067A, 30124A:
ngers behind the tabs and pull forward. (Refer to Figure 2.)
4. Next, check the HEPAtech
® lter by pressing rmly on all four corners of the
lter to ensure that it is fully inserted into the lter opening.
5. The carbon pre-lter is mounted inside of the front grill with “hook” tape.
Conrm that it covers the grill vents. (Refer to Figure 3.)
6. Place the lter installation reminder sticker on the inside edge of the front
grill. Circle the month and write the year of installation for the pre-lter and
HEPAtech® lter.
7. Replace the lter and front grill. Be sure that the bottom grill tabs are in
position rst, and then push the top of the grill forward until it is closed. The
unit is now ready for normal operation. NOTE: This unit will not operate
unless the door is placed in the correct position.
8. Plug the unit into a 120V electrical outlet.
AIR PURIFIER PARTS
Figure 1 - Model 30057A, 30061

Especificaciones del producto

Marca: Hunter
Categoría: purificador de aire
Modelo: HEPAtech

¿Necesitas ayuda?

Si necesitas ayuda con Hunter HEPAtech haz una pregunta a continuación y otros usuarios te responderán




purificador de aire Hunter Manuales

purificador de aire Manuales

Últimos purificador de aire Manuales