I-PRO WV-S65501-Z1 Manual de Usario

I-PRO Cámara de vigilancia WV-S65501-Z1

Lee a continuación 📖 el manual en español para I-PRO WV-S65501-Z1 (45 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/45

Installation Guide

Included Installation Instructions

Outdoor use

For professional use only

NOTE: This equipment has been tested and found

to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference when the equipment

is operated in a commercial environment. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is

likely to cause harmful interference in which case the

user will be required to correct the interference at his

own expense.

FCC CAUTION: Changes or modifications not

expressly approved by the party responsible for com-

pliance could void the user’s authority to operate the

equipment.

Supplier’s Declaration of conformity

Trade name : i-PRO

Model No. : WV-S65501-Z1

Responsible Party :

i-PRO Americas Inc.

8550 Fallbrook Drive, Suite 200 Houston,

Texas 77064

Support Contact : 1-800-513-5417

For U.S.A.

CAN ICES-3(A)/NMB-3(A)

For Canada

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

For U.S.A.

The model number and serial number of this prod-

uct may be found on the surface of the unit.

You should note the model number and serial num-

ber of this unit in the space provided and retain this

book as a permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

For U.S.A.

Méthode d’installation Vis de fixation

recommandée

La capacité de traction

minimale requise

Monter directement la caméra vidéo sur la surface d’installation. M4x16 mm

{5/8 pouces} x 4 él.* 196 N {44 lbf}

Installer la caméra vidéo sur une boîte de groupe/boîte de jonction double.

Installer la caméra vidéo à l’aide de la platine de fixation d’installation

exclusivement conçue.

Se référer au manuel d’utilisation de chaque

platine de fixation.

* La longueur de la vis est un exemple lors de l’installation de la caméra au plafond ou sur un mur robuste d’une

épaisseur de 20 mm {25/32 pouces} ou plus.

Disposal of Old Equipment and Batteries

Only for European Union and countries with recycling systems

These symbols on the products, packaging, and/or accompanying documents mean that used

electrical and electronic products and batteries must not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to

applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment.

For more information about collection and recycling, please contact your local authority.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

Note for the battery symbol (bottom symbol)

This symbol might be used in combination with a chemical symbol. In this case it complies with the

requirement set by the Directive for the chemical involved.

Precautions 2 ........................................................

Open source software 3 ........................................

Trademarks and registered trademarks 3 ...............

Precautions for installation 3 ..................................

Troubleshooting 3 ..................................................

Specifications. 4 ....................................................

Optional accessories 4 ..........................................

Standard accessories 4 .........................................

Other items that are needed (not included) 4 .........

Installation Procedure 5 .........................................

Contents

Model No.

WV-S65501-Z1

Network Camera

About the user manuals

Product documentation is composed of the following documents.

• Provides information about “Precautions”, Installation Guide (this document):

“Precautions for installation” and the installation method.

• Basic Information (Refer to the link on the following product information website): Provides

information about “Precautions for use”, “Parts and functions” and “Detail specifications”.

• Operating Instructions (Refer to the link on the following product information website):

Explains how to perform the settings and how to operate this camera.

https://i-pro.com/global/en/surveillance/training-support/documentation-database-list

“<Control No.: C****>” used in these documents should be used to search for information on

our technical information website (https://i-pro.com/global/en/surveillance/training-support/

support/technical-information) and will guide you to the right information.

• Before attempting to connect or operate this product, please read these instructions

carefully and save this manual for future use.

• microSDXC/ microSDHC/ microSD memory card is described as microSD memory card.

• The external appearance and other parts shown in this manual may differ from the actual product within the

scope that will not interfere with normal use due to improvement of the product.

Tokyo, Japan

https://www.i-pro.com/

Authorised Representative in EU:

i-PRO EMEA B.V.

Laarderhoogtweg 25, 1101 EB

Amsterdam, Netherlands

i-PRO EMEA B.V. UK Branch

1010 Cambourne Business Park,

Cambridgeshire CB23 6DP

N1222-0

PGQP3665ZA

Precautions

■ Do not insert any foreign objects.

Fire or electrical shock may be caused if water or any foreign objects, such as metal objects, enter inside the unit.

Turn the power off immediately and contact qualified service personnel for service.

■ Do not use this product in an inﬂammable atmosphere.

Failure to observe this may cause an explosion resulting in injury.

■ Avoid installing this product in the locations where salt damage occurs or corrosive gas

is produced.

Otherwise, the mounting portions will deteriorate and injury or accidents due to a fall of the product may occur.

■ Do not strike or give a strong shock to this product.

Failure to observe this may cause injury or fire.

■ Keep microSD memory cards away from infants and children.

Otherwise, they may swallow the cards by mistake.

In this case, consult a doctor immediately.

■ Do not hang down from this product or use this product as a pedestal.

Failure to observe this may cause injury or accidents.

■ Do not damage the power cable.

Do not damage, fabricate, twist, stretch, bundle, or forcibly bend the power cable. Do

not place heavy objects on it, and keep it away from heat sources.

Use of a damaged power cable may cause electric shock, short circuit, or fire.

Consult the dealer for repair.

■ Do not install this product on a place that is greatly inﬂuenced by wind.

Installation on a place where the wind speed is 60 m/s {approx. 134 mph} or more may cause a fall of the pro-

duct resulting in injury or accidents.

■ Do not sprinkle more water, exceeding the performance limit of waterproof with a high

pressure cleaning machine, etc.

Fire or electrical shock may be caused by immersion.

■ Do not attempt to disassemble or modify this product.

Doing so can cause fire, electric shock, etc.

Ask your dealer for repair and inspection.

WARNING:

• Operation of this product in a residential environment could cause radio interference.

Caution:

• The DC power supply connected to the camera must

be in the same building.

• The network camera is only intended for a connection

to an ethernet or PoE network without routing to the

outside plant.

• This product has no power switch. Be sure to install

disconnect devices such as a circuit breaker to shut

down the main power of power supplying equipment

to this product.

• Only connect 12 V DC Class 2 power supply (UL

1310/CSA 223), limited power source (IEC/EN/UL/

CSA 60950-1, IEC/EN/UL/CSA 62368-1 Annex Q)

or IEC/EN/UL/CSA 62368-1 PS2.

• Before attempting to connect or operate this product,

please read these instructions carefully.

Notice:

• This product is not suitable for use in locations

where children are likely to be present.

• Do not install this product in locations where

ordinary persons can easily reach.

• This product is a professional equipment.

• For information about screws and other parts

required for installation, refer to the corresponding

section of this document.

: Direct current symbol

■ Do not install or clean the camera, or touch this product, the power cable or the

connected cables during thunder storms.

Failure to observe this may cause electric shock.

■ Refer installation work to the dealer.

Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury,

or damage to the product.

Be sure to consult the dealer.

■ Stop the operation immediately when something is wrong with this product.

When smoke goes up from the product, the smell of smoke comes from the product, or the exterior of the product

has deteriorated, continued use will cause a fire or fall of the product resulting in injury, or damage to the property.

In this case, turn the power off immediately and contact qualified service personnel for service.

■ Select an installation area that can support the total weight.

Selecting an inappropriate installation surface may cause the product to fall down or topple over, resulting in

injury or accident.

Installation work shall be started after sufficient reinforcement.

■ Periodic inspections shall be conducted.

Rust on the metal parts or screws may cause a fall of the product resulting in injury or accidents.

Consult the dealer for the inspections.

■ The exclusively designed mount bracket shall be used. (except for direct mount of the

camera)

Failure to observe this may cause a drop resulting in injury or accidents.

Use the exclusively designed mount bracket for installation.

■ The screws and bolts must be tightened to the speciﬁed torque.

Failure to observe this may cause a drop resulting in injury or accidents.

■ Turn the power off when do wiring of this product.

Failure to observe this may cause electric shock. In addition, short circuit or wrong wiring may cause fire.

■ Install this product in a location high enough to avoid people and objects from bumping

the product.

Failure to observe this may cause injury.

■ Do not install this product in locations subject to vibration.

Loosening of mounting screws or bolts may cause a fall of the product resulting in injury or accidents.

■ Correctly perform all wiring.

Short circuits in the wiring or incorrect wiring may cause fire or electrical shock.

■ Install the product securely on an installation surface in accordance with the installation

instructions.

Failure to observe this may cause injury or accidents.

■ Do not rub the edges of metal parts with your hand.

Failure to observe this may cause injury.

■ Do not touch the metal part of the bottom side of the product.

The metal part of the bottom side may become hot while the product is in use. Direct skin contact with high

temperature parts of the product may cause burns.

■ Turn the power off when cleaning this product.

Failure to observe this may cause injury.

Especificaciones del producto

Marca:	I-PRO
Categoría:	Cámara de vigilancia
Modelo:	WV-S65501-Z1

¿Necesitas ayuda?

Si necesitas ayuda con I-PRO WV-S65501-Z1 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Cámara de vigilancia I-PRO Manuales

I-PRO WV-SBV131M Manual de Usario

18 Septiembre 2024

I-PRO WV-SFV781L Manual de Usario

18 Septiembre 2024

I-PRO WV-X2271L Manual de Usario

18 Septiembre 2024

I-PRO WV-S15500-F6L Manual de Usario

18 Septiembre 2024

I-PRO WV-S8544L Manual de Usario

18 Septiembre 2024

I-PRO WV-X2571LN Manual de Usario

18 Septiembre 2024

I-PRO WV-S15500-V3L Manual de Usario

18 Septiembre 2024

I-PRO WV-S65501-Z1 Manual de Usario

18 Septiembre 2024

Cámara de vigilancia Manuales

Últimos Cámara de vigilancia Manuales

Speco Technologies WDRB11H Manual de Usario

27 Octubre 2024

Vivotek AI-108 Manual de Usario

27 Octubre 2024

Acti E88 Manual de Usario

27 Octubre 2024

Yale WIPC-303W Manual de Usario

27 Octubre 2024

Grandstream GXV3611IR_HD Manual de Usario

27 Octubre 2024

Airlive DM-720 Manual de Usario

27 Octubre 2024

Speco Technologies O8B7M Manual de Usario

27 Octubre 2024

Grandstream GXV3615W Manual de Usario

27 Octubre 2024

Vivotek IP8133 Manual de Usario

27 Octubre 2024

Olympia OC 1280P Manual de Usario

27 Octubre 2024