Icom IC-M200 Manual de Usario

Icom Radio IC-M200

Lee a continuación 📖 el manual en español para Icom IC-M200 (24 páginas) en la categoría Radio. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/24

INSTRUCTION MANUAL

iM200

VHF MARINE TRANSCEIVER

READ ALL INSTRUCTIONS carefully and

completely before using the transceiver.

SAVE THIS INSTRUCTION MANUAL — This

instruction manual contains important oper ating instructions

for the IC-M200.

WORD DEFINITION

RDANGER! Personal death, serious injury or an

explosion may occur.

RWARNING! Personal injury, re hazard or electric

shock may occur.

CAUTION Equipment damage may occur.

NOTE

If disregarded, inconvenience only. No

risk of personal injury, re or electric

shock.

Thank you for choosing this Icom product.

This product is designed and built with Icom’ s state of

the art technology and craftsmanship. With proper care,

this product should provide you with years of trouble-free

operation.

IMPORTANT

EXPLICIT DEFINITIONS

CLEAN THE TRANSCEIVER THOROUGHLY WITH

FRESH WATER after exposure to saltwater, and dry

it before operating. Otherwise, the transceiver's keys,

switches and controllers may become unusable, due to salt

crystallization.

NOTE: If the transceiver’s waterproof protection appears

defective, carefully clean it with a soft, wet (fresh water)

cloth, then, dry it before operating.

The transceiver may lose its waterproof protection if the

case or connector cover is cracked or broken, or the

transceiver has been dropped.

If your vessel requires assistance, contact other vessels and

the Coast Guard by sending a Distress call on Channel 16.

USING CHANNEL 16

DISTRESS CALL PROCEDURE

1. “MAYDAY MAYDAY MAYDAY.”

2. “THIS IS ...............” (name of vessel).

3. State Your call sign or other description of the vessel

4. “LOCATED AT ...............” (your position).

5. State the nature of the distress and assistance

required.

6. Give any other information which might facilitate the

rescue.

IN CASE OF EMERGENCY

R WARNING! NEVER connect the transceiver to an AC outlet.

This may pose a re hazard or result in an electric shock.

R WARNING! NEVER connect the transceiver to a power source

of more than 16 V DC such as a 24 V battery. This could cause a

re or damage the transceiver.

R WARNING! NEVER reverse the DC power cable polarity when

connecting to a power source. This could damage the transceiver.

R WARNING! NEVER cut the DC power cable between the DC

plug at the back of the transceiver and fuse holder. If an incorrect

connection is made after cutting, the transceiver may be damaged.

R WARNING! NEVER operate the transceiver during a lightning

storm. It may result in an electric shock, cause a re or damage the

transceiver. Always disconnect the power souce and antenna before

a storm.

CAUTION: NEVER place the transceiver where normal operation of

the vessel may be hindered or where it could cause bodily injury.

DO NOT use or place the transceiver in areas with temperatures

below –20°C or above +60°C or, in areas subject to direct sunlight,

such as the dashboard.

DO NOT use harsh solvents such as Benzine or alcohol to clean

the transceiver, as they will damage the transceiver’s surfaces. If

the transceiver becomes dusty or dirty, wipe it clean with a soft, dry

cloth.

DO NOT disassemble or modify the transceiver for any reason.

BE CAREFUL! The transceiver rear panel will become hot when

operating continuously for long periods of time.

BE CAREFUL! The transceiver and the hand microphone meet

IPX7 requirements for waterproof protection. However, once the

transceiver or the microphone has been dropped, waterproof

protection cannot be guaranteed because of possible damage to

the transceiver or microphone's case or their waterproof seals.

Keep the transceiver at least 1 m away from the ship’s navigation

compass.

PRECAUTIONS

TABLE OF CONTENTS

1. OPERATING RULES 1 .............................................

2. PANEL DESCRIPTION.......................................... 2

3. BASIC OPERATION 4 ..............................................

4. SCAN OPERATION 9 ...............................................

5. DUALWATCH/TRI-WATCH ...................................11

6. SET MODE 12 ..........................................................

7. CONNECTIONS AND MAINTENANCE 14 ..............

8. TROUBLESHOOTING ........................................ 17

9. CHANNEL LIST 18 ...................................................

10. SPECIFICATIONS AND OPTIONS 19 ...................

INDEX...................................................................... 20

Especificaciones del producto

Marca:	Icom
Categoría:	Radio
Modelo:	IC-M200
Color del producto:	Zwart
Ancho:	109 mm
Profundidad:	89 mm
Altura:	25 mm
Amable:	AV-zender & ontvanger
Color:	Ja
Tipo de conector USB:	Mini-USB B
Tecnología de conectividad:	Bedraad
red LAN:	Ja
Modos de vídeo compatibles:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p
Resolución Máxima:	4096 x 2160 Pixels
Certificación:	CE, FCC
HDCP:	Ja
Entrada remota (IR):	2
Certificados de sostenibilidad:	RoHS
Profundidad del color:	10 Bit
Temperatura de almacenamiento:	-20 - 60 °C
Salida remota (IR):	2
Entrada HDMI:	1
Puertos de entrada RS-232:	1
Puertos de salida RS-232:	1
Banda-ancha:	10.2 Gbit/s
Número de salidas HDMI:	1
Puerto HDBaseT:	Ja
Rango-maximo:	70 m
voltaje-de-entrada-de-CA:	100-240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Consumo de energía (típico):	12 W
Temperatura de funcionamiento (TT):	0 - 50 °C
Humedad relativa de funcionamiento (VV):	20 - 90 procent
Peso del receptor:	330 g
Peso del transmisor:	270 g
Tipos de cables compatibles:	Cat5e, Cat6, Cat6a, Cat7