IDIS DA-PI1101 Manual de Usario

IDIS Tarjeta/adaptador de red DA-PI1101

Lee a continuación 📖 el manual en español para IDIS DA-PI1101 (8 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

DA-PI1101

PoE Injector

IEEE 802.3at PoE

Power Source Injector,

10/100Mbps LAN

Operation Manual

Before Using the Product

FCC Compliance Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at

his own expense.

User’s Caution Statement

Caution: Any changes or modifications to the equipment not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

Product Overview

DA-PI1101 is a single port PoE Power Source (PSE) injector that supplies 48V DC power

to a remote network camera via a UTP Ethernet cable. It offers outstanding reliability with

low power consumption and long life span. It is capable of transmitting maximum of 30W

of output for up to 100 meters.

DA-PI1101 is IEEE802.3af and IEEE 802.3at-compliant. It is also equipped with a circuitry

for preventing damages to the device when non-standard or low-voltage PoE devices are

connected to ensure safe operations.

Product Features

●Up to 30W of PoE Power Feeding on 2-pairs

●Compatible with IEEE 802.3af/at

●Protects low power devices to receive only the power they need

●Automatic detection and protection of non–standard Ethernet terminals

●Supports 10/100Base-T LAN environment

●Parallel slide-in design to ease the installation

Accessories

The product consists of the following components.

AC/IN 100-240V

Main Unit (DA-PI1101) AC power cable

(conventional 220V)

Operation Manual

Especificaciones del producto

Marca:	IDIS
Categoría:	Tarjeta/adaptador de red
Modelo:	DA-PI1101
Peso.:	310 g
Luz de la cola:	Ja
Tiempo de carga:	3 uur
Capacidad del acumulador/batería:	450 mAh
Bluetooth:	Ja
Interruptor encendido / apagado:	Ja
Tiempo de reproducción de audio continuo:	6 uur
Versión Bluetooth:	4.1
Batería/Voltaje de la batería:	3.7 V
Sexo:	Unisex
Número de hablantes:	2
Certificación:	FCC
Duración de la batería/duración de la batería:	10 uur
Certificados de sostenibilidad:	CE, RoHS
Tipo de construcción:	In-mold-constructie
Ventilación:	Ja
Tipo acabado:	Glans
Color principal del producto.:	Black, Grey
Alcance de Bluetooth:	10 m
Tipo de puerto de carga:	Micro-USB
Sensibilidad del micrófono:	-39 dB
Altavoces potentes:	0.5 W
Tinción:	Monochromatisch
Etapa de vida del consumidor.:	Volwassene
Función de alerta SOS:	Ja
Tiempo-de-espera:	180 dag(en)
Material de la carcasa del casco:	Polycarbonaat
Estilo de timón:	Halve helm
Actividad:	Mountainbiken
Yelmovisir:	Ja
Tipo de gorro deportivo:	Helm
Número de orificios de ventilación:	21
Ajuste ajustable:	Ja
Rango de circunferencia de la cabeza:	58 - 62 cm
Tipo de ventilación:	Vast
Sistema de ajuste con botón.:	Ja
Material de espuma protectora:	Polystyreenschuim