IGS Audio Rubber Bands Manual de Usario

IGS Audio Maquina de efectos Rubber Bands

Lee a continuación 📖 el manual en español para IGS Audio Rubber Bands (8 páginas) en la categoría Maquina de efectos. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

RUBBER BANDS

USER'S MANUAL

IGS Audio Igor Sobczyk

3 Maja 76d, 41-400 Mysłowice, Poland

e-mail: igs@o2.pl ph: +48 601 597 592

www.igsaudio.com

Please read all of the following instructions and save them

for later reference before attempting to connect the unit to the mains.

EARTH

This unit is connected via its power cord to the mains safety earth.

NEVER OPERATE THE UNIT WITH THIS EARTH CONNECTION REMOVED.

COVERS

DO NOT remove the covers. Refer servicing to qualified personnel only.

VOLTAGE

Unit is set to operate only at the voltage indicated on the PSU unit

CHECK that the correct voltage is selected before connecting the AC mains supply.

FUSES

CHECK that the fuse fitted is the correct type for the local mains voltage.

ALWAYS replace fuse with the correct type.

MOISTURE

DO NOT expose the unit to rain or moisture. If the unit

should become so exposed REMOVE the mains power immediately.

CABLES

PROTECT the mains power cord from damage though impact or abrasion.

HEAT

ALWAYS site the unit away from sources of heat including direct sunlight and ensure

adequate ventilation around the unit.

The information in this document is subject to change without notice.

IGS Audio makes no warranty of any kind with respect to the material in this document

and shall not be liable for errors contained herein or for incidental or consequential

damages related to the use of the material.

Manual revision: 1.0 (December 2014)

Thank you for buying this IGS Audio product.

Please read the information provided below very carefully before using your IGS unit.

Unpacking

Your RUBBER BANDS has been carefully and meticulously tested and inspected before

dispatch. Please check for any signs of transit damage. If any signs of mishandling are found

please notify the carrier and your dealer immediately.

Your RUBBER BANDS packing should contain an RUBBER BANDS with IGS Audio tag, an

RUBBER BANDS POWER SUPPLY unit and this manual with the Warranty and

RoHS/CE/WEEE Declaration attached.

Compatibility and Power

The RUBBER BANDS uses dedicated external POWER SUPPLY unit and can't operate without

it.

Never attempt to replace the external PSU with the third party one or one made by yourself.

There is a fuse socket near the power cable connector on the PSU. Ensure that the correct fuse

is being used before plugging the TUBECORE to the power outlet.

➔For US area (115V) use 2A Slow Blow (Type T).

➔For Europe and rest of the world area (230V) use 1A Slow Blow (Type T).

Always check the voltage selector on the PSU to ensure that it is set to the proper voltage

available in your country.

Connecting the PSU to the RUBBER BANDS is fairly easy, thanks to industrial standard 7-pin

metal connector and long, heavy duty cable.

Always power up the PSU first and then use power switch at the front of the RUBBER

BANDS. Follow the reverse order when switching off.

Especificaciones del producto

Marca:	IGS Audio
Categoría:	Maquina de efectos
Modelo:	Rubber Bands
Color del producto:	Zwart
Ancho:	438 mm
Profundidad:	724 mm
Altura:	88 mm
Peso del embalaje:	38600 g
Fuente de alimentación:	100 - 240V, 50-60Hz
Indicadores LED:	Ja
Bluetooth:	Nee
red LAN:	Ja
Lector de tarjetas de memoria integrado:	Nee
Puerto(s) VGA (D-Sub):	2
Número de puertos Ethernet LAN (RJ-45):	6
Certificación:	RoHS
Suministro de red:	1280 W
Cámara integrada:	Nee
Temperatura de almacenamiento:	-40 - 70 °C
LED de encendido:	Ja
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Zócalo del procesador:	LGA 2011 (Socket R)
Memoria interna máxima:	1000 GB
Tipo de unidad óptica:	Nee
Adaptador de gráficos incorporado:	Ja
Modelo de adaptador de gráficos integrado:	Aspeed AST2400
Humedad de almacenamiento:	5 - 95 procent
Funciones de red:	10GBase-T LAN
Tipo de vivienda:	Rack (2U), -
El exceso de apoyo de los fans:	Ja
ETC:	Ja
placa base con chipset:	Intel® C612
Ranuras PCI Express x16:	4
Familia de adaptadores gráficos:	Aspeed
Interfaz de disco de almacenamiento:	SATA III
Puertos seriales):	2
Ranuras PCI Express x8:	2
Controlador LAN:	Intel X540, Realtek RTL8201N
Tipos de incursión:	0, 1,5, 10
Procesadores compatibles:	Intel® Xeon®
Número de unidades de almacenamiento admitidas:	16
Tamaños de unidades de almacenamiento admitidos:	2.5 "
Tipos de memoria soportados:	DDR4-SDRAM
Wifi.:	Nee
Temperatura de funcionamiento (TT):	10 - 35 °C
Humedad relativa de funcionamiento (VV):	8 - 90 procent
Número de ranuras de memoria:	16
Velocidades de reloj de memoria admitidas:	1600,1866,2133 MHz
tipo de BIOS:	AMI
Número de conexiones SATA:	16