ILive IAHP87 Manual de Usario

ILive Auriculares IAHP87

Lee a continuación 📖 el manual en español para ILive IAHP87 (2 páginas) en la categoría Auriculares. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

FCC Warnings

Warning: Changes or modications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings and Precautions

• To avoid hearing damage, make sure that the volume on your music player is turned down before

connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume

until you reach a comfortable listening level.

• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of

according to state and local guidelines. They should never be disposed of in normal household waste,

and they should never be incinerated, as they might explode. Contact your local government for

disposal or recycling practices in your area.

• WARNING: This product may contain chemicals known to the State of California to cause birth

defects, or other reproductive harm (California Prop 65). Wash hands after handling.

• This product meets and complies with all Federal regulations.

Overview

Wireless Noise Canceling Headphones

User’s Guide for Model IAHP87 v1924-01

Includes

• Micro-USB to USB charging cable

• 3.5mm audio cable

• 3.5mm female to 2 x 3.5mm male audio adapter

• Travel case

Features

• Supports Bluetooth

• Wireless range: 33 feet

• Built-in microphone

• Aux in (3.5mm audio input)

• Folding adjustable headband

• On-ear controls

• Voice prompts announce headphone

operations

• DC battery power: built-in

rechargeable lithium ion battery

• Micro-USB port for battery recharge

• Battery life: approx. 8 hours

Noise Canceling

Press to turn ON or OFF.

Power/Pair/Play/Pause/

Speakerphone

Press and hold for approx. 4 sec. to

power ON and begin pairing.

Press and hold to power ON or OFF.

Press to play or pause audio.

Press to answer incoming call.

Volume

Press to adjust volume level.

Micro-USB Power Port

MAIN CONTROL

PRESS LEFT SIDE FOR

MAIN CONTROL

PRESS RIGHT SIDE FOR

Aux In (3.5mm audio input)

STATUS INDICATOR

Power ON Flashing blue light

Charging Battery Solid red light

Charging Complete No light

Pairing Bluetooth Flashing red/blue lights

Pairing Complete Flashing blue light

Noise Canceling ON Solid green light

Noise Canceling OFF Green light OFF

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the

support section at: www.iLiveElectronics.com

Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes,

visite la sección de apoyo en: www.iLiveElectronics.com

Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions

fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com

For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com

Customer Service: | Email Support: | Email Parts: 1-888-999-4215 prodinfo@dpiinc.com partsinfo@dpiinc.com

respective owners. Specications are subject to change without notice.

International Support

Protect for Today

Sustain for Tomorrow

Made

Green

Charging the Battery

Requires a Micro-USB to USB cable (included). The low battery indicator will ash

for 1 minute, then the unit will automatically power OFF.

1. Using a cable (included), connect the headphones to the Micro-USB to USB

USB port of a powered on computer or USB power adaptor (not included).

Aux In

Aux In mode will function even if the headphones are not powered ON.

To conserve battery power, keep them powered OFF when using Aux In.

Requires a 3.5mm audio cable (included).

1. Connect a 3.5mm audio cable to the on the unit and the Aux In

audio output on an audio device.

2. Use the controls on the connected device to select and play audio.

Noise Canceling

The Noise Canceling feature will electronically mute background noise. It can be

used with the Bluetooth or Aux In modes to enhance the quality of any music or

audio that is playing through the headphones.

Noise Canceling mode will function even if the headphones are not powered ON.

To conserve battery power, it is recommended to power the headphones OFF if

you want to use the Noise Canceling feature without playing audio.

1. To activate noise cancelling, press the right side Main Control of the

button. A green LED light in the button will turn ON.

2. To deactivate noise cancelling, press the right side Main Control of the

button again. The green LED light in the button will turn OFF.

Bluetooth Wireless Audio

Pairing to a Device and Playing Audio

After initial pairing, the unit will stay paired unless unpaired manually by the user,

or erased due to a reset of the device. If your device should become unpaired or

you nd it is unable to connect, repeat the steps listed here.

1. Press and hold the of the left side Main Control button for approximately

4 seconds to power ON and begin pairing. LED lights in the button will

begin ashing red and blue. When pairing, remain within 3 feet of the unit.

2. Using the controls on your Bluetooth device, select the in your IAHP87

Bluetooth settings/device menu. If your device requests a password, enter

the default password 0 0 0 0 . If need be, refer to the user’s manual for your

specic device for instructions on pairing and connecting Bluetooth devices.

3. When successfully paired, the LED lights will only ash blue and a chime will

sound through the unit. Audio played through the connected Bluetooth

device should now be heard through the headphones.

4. Use the controls on your Bluetooth device to select and begin playing

audio. To play or pause audio using the headphone controls, press the left

side Main Control button. of the

Using the Speakerphone

1. When a call is received, a ringtone will sound through the unit.

2. To accept the call, press the of the left side Main Control button, or use

the controls on the connected phone.

3. To refuse the call, press and hold the of the left side Main Control button,

or use the controls on the connected phone.

4. To call back, double press the of the left side Main Control button.

Especificaciones del producto

Marca:	ILive
Categoría:	Auriculares
Modelo:	IAHP87
Color del producto:	Wit
Peso.:	64 g
Ancho:	105 mm
Profundidad:	40 mm
Altura:	25 mm
Número de puertos Ethernet LAN (RJ-45):	1
Certificación:	CE, FCC
Conecta y reproduce:	Ja
Voltaje de entrada:	100 - 240 V
Estándar de red:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Soporta Windows:	Ja
Temperatura de almacenamiento:	0 - 90 °C
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Soporta el sistema operativo Mac:	Ja
Corriente de salida:	0.5 A
Fuente de alimentación a través de USB:	Ja
Ratio de transferencia:	5000 Mbit/s
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Temperatura de funcionamiento (TT):	0 - 40 °C
Código del Sistema Armonizado (SA):	84719000
Número de puertos:	4
Interfaces de concentrador:	USB 1.1, USB 2.0, USB 3.2 Gen 1 (3.1 Gen 1) Type-A