Imou Cell Go Full Color Manual de Usario

Imou Cámara Cell Go Full Color

Lee a continuación 📖 el manual en español para Imou Cell Go Full Color (12 páginas) en la categoría Cámara. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
Failed to Connect to WiFi During Initial Setup Process
1. Conrm at which Page you failed?
When you see this failure page, it is usually because the device Bluetooth cannot establish good
communication with the mobile phone Bluetooth.
You can try the following steps:
Step 1: Check if the indicator light of the device is ashing green slowly. If it
is not, you can press the device button again to activate the device.
Step 2: Press "Try Again" on the APP interface to try again.
If you still cannot set up successfully, please check the “Reset Guideand
re-add the device.
You can re-add the device after resetting it:
Step 1: Long press the device button to reset until you hear a beep and the green indicator
light ashes.
Step 2: Press “Add Again” on the APP interface to -re add.
Step 3: Conrm that you are connected to a 2.4GHz WiFi network and enter the correct WiFi
password
If you search for two WiFi with the same name in your WiFi list and one of them is displayed as 5G, do not connect to the 5G
WiFi, select the other one to connect.
If your router is dual-band, you can log in to the router settings on the web, turn o the 5G Wi-Fi switch, and only keep 2.4G
Wi-Fi for connection. After the connection is successful, turn on 5G Wi-Fi again.
Step 4: Conrm that the indicator light of the device is in the green light slow ashing state
during the network conguration process. If it isn’t, you can short press the device button to
activate the device and make the device ash green slowly again.
Step 5: The green light is always on, and the device is successfully connected to the router.
If you still cannot set up successfully, please contact our imou support team and Please
provide a screenshot of your failed interface and indicator status of battery camera.
When you see this failure interface, it is usually caused by the inability to establish a connection between
the device and the cloud platform.
1. If the network environment has changed, you can reset the device and enter the network settings to recongure
the network.
2. If the addition fails, you can reset the device and enter the network settings to recongure the network.
When do I need to RESET the device to Re-add?
Reset button for different Imou battery cameras
Press and hold the Reset button for about 5 to 10 seconds until you hear a beep and see the device indicator light slowly
ashing green, then the device is reset successfully.

Especificaciones del producto

Marca: Imou
Categoría: Cámara
Modelo: Cell Go Full Color

¿Necesitas ayuda?

Si necesitas ayuda con Imou Cell Go Full Color haz una pregunta a continuación y otros usuarios te responderán




Cámara Imou Manuales

Cámara Manuales

Últimos Cámara Manuales