Impact VSD-160 Manual de Usario

Impact Lámpara VSD-160

Lee a continuación 📖 el manual en español para Impact VSD-160 (16 páginas) en la categoría Lámpara. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
VSD Series Monolight
INSTRUCTIONS
2
Thank you for purchasing an Impact VSD Series Monolight. This device is
proof that highly-functional monolights can be affordable. The VSD Series
Monolight provides enough stored power to light a portrait or small still-life
setup and offers features found on monolights costing twice as much. We
expect that you will get many years of trouble-free service and enjoyment
from your Impact VSD Monolight. Please read these operating instructions
and safety precautions carefully before operating this equipment.
Features
• Four-stop range – full power to 1/16 power in .10 f/stop increments
• Large LCD screen
• Built-in optical slave
• “Auto-Dump” feature automatically res the ash when you step down power
• Modeling lamp can be set proportionally or independently of ash power
• Cushioned “touch-pad” function control buttons
• Tactile, “grippy” feel that resists slipping and shock damage
• Accepts Bowen-style reectors and head accessories (7-inch grid reector included)
• User-replaceable ashtube
• Commonly available 1/8˝ mini-plug sync input
Power Requirements
This light is designed for use with 110/120V AC power only and is supplied with a
three-prong, grounded plug. Do not at tempt to defeat this safety feature. If necessar y,
use only grounded extension cords rated for 6 amps or greater.
Warning
There are no user-serviceable parts inside the unit. Only qualied service engineers
should access the inside of the case (Danger – high-voltage par ts inside). Avoid damage
to both the ashtube and modeling lamp. If the modeling lamp or ashtube become
cracked or damaged in any way, they should be replaced immediately. Do not use your
ash unit in an environment where moisture or ammable vapor is likely to come in
contact with the unit. Turn the power off and unplug the power cord when the unit is not
in use. Always remove the modeling lamp and replace the protective cap when
transpor ting the unit .
All images in this manual are for illustrative purposes only. Your unit may differ slightly from the one pictured.
3
Contents of carton
Carefully remove the monolight from the box. You should have the following:
• 110-120V monolight with protective cap and ashtube installed
• 100 W modeling lamp (60W with VSD-160 model)
• 7˝ grid reector • sync cable
• power cable • user manual
Mount on a stand
(1) Select a stand or support
system of suitable weight
and dimensions to ensure
stable operation of the unit.
Install Reector &
Modeling Lamp
(2) Depress the latch on top
of the monolight, pressing it
toward t he back of the unit.
Rotate the pro tective cap
counter-clockwise. Pull the
cap off and set aside.
(3) Install the modeling
lamp by screwing it into the
threaded socket.
CAUTION: Do not touch the lamp wi th your bare hands. Oil residue from your ngers can
cause the surface of the lamp to heat unevenly and explode. Use white cotton gloves or a
clean cloth. (4) Install the reector where the protective cap was before. Align the three
pegs on the reector with the three slots, press the reector in and rotate clockwise
until it locks in place.
Note: Take care when tting or removing reectors or softboxes to not damage the
ashtube assembly. The ashtube is very delicate. Always switch off the unit and
disconnect the power before tting or changing lamps, ashtubes, reectors, or softboxes.
Preparing Your Monolight for Use
1
3 4
2

Especificaciones del producto

Marca: Impact
Categoría: Lámpara
Modelo: VSD-160

¿Necesitas ayuda?

Si necesitas ayuda con Impact VSD-160 haz una pregunta a continuación y otros usuarios te responderán




Lámpara Impact Manuales

Lámpara Manuales

Últimos Lámpara Manuales