InFocus IN2124X Manual de Usario

InFocus proyector IN2124X

Lee a continuación 📖 el manual en español para InFocus IN2124X (11 páginas) en la categoría proyector. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/11

Function Command Returns

Volume (VOL?) (0-10, 8)

Source (SRC?) (0-22, 2)

Lamp hours (LMP?) (0-9999, 42)

Max lamp life (LIF?) ("5000")

Function Command Returns

Volume (VOL+) Increases volume by one increment

Source (SRC0) Switches to Computer1

Power (PWR1) Turns the projector on

Ceiling mode (CEL1) Turns on ceiling mode

InFocus IN124x, IN126x, IN128HDx, IN124STx, IN126STx, IN128HDSTx,

IN2124x, IN2126x, IN2128HDx

RS232 Control Instructions

Serial Communication Configuration

To control this projector via RS-232, connect a null modem cable and set the control system serial port

settings to match the following communication configuration.

When Power Saving mode is enabled and the projector is turned off, the projector will echo commands. It will

not echo commands when the projector is on or when Power Saving mode is disabled.

RS-232 Command and Configuration

Baud Rate:9600 Parity Bit:none Data Bit:8 Stop Bit:1

Lamp Ignition delay = 10s

Power Down delay = 10s

Source change delay = 3s

Intercommand delay minumum = 5ms

Intercharacter delay minumum = 2ms

Command Format

All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can

be a read request (indicated by a "?") or a write request (indicated by 1 to 4 ASCII digits).

Error Conditions

Not all commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request

can be a read request (indicated by a "?") or a write request (indicated by 1 to 4 ASCII digits).

Read Requests

A read command returns a text string or the rang and the current setting, for example:

Write Requests

Some commands have ranges, while others are absolute. If a number greater or less than the maximum range

is received, it will return an error "?".

Function Command Returns

Keystone (DKH20!) Sets keystone to +20

Source (SRC4!) Switches to HDMI1

Power (PWR0!) Turns the projector off

Color space Sets the color space to REC601(CSM3!)

Command List

Power return code (ok)

Status ? (PWR?) (0-1,n) n=0,1

ON (PWR1)

OFF (PWR0)

ON & return (PWR1!) (0-1,1)

OFF & return (PWR0!) (0-1,0)

Menu(OSD) Status return code (ok)

Status ? (MNU?) (0-1,n) n=0,1

ON (MNU1)

OFF (MNU0)

ON & return (MNU1!) (0-1,1)

OFF & return (MNU0!) (0-1,0)

Key Pad return code (ok)

Status ? (NAV?) (0-5,0) n=0-5

Menu (NAV0)

Up (NAV1)

Down (NAV2)

Select (NAV3)

Left (NAV4)

Right (NAV5)

Menu & return (NAV0!) (0-5,0)

Up & return (NAV1!) (0-5,1)

Down & return (NAV2!) (0-5,2)

Select & return (NAV3!) (0-5,3)

Left & return (NAV4!) (0-5,4)

Right & return (NAV5!) (0-5,5)

Auto Source return code (ok)

Status ? (ASC?) (0-1,n) n=0,1

ON (ASC1)

OFF (ASC0)

ON & return (ASC1!) (0-1,1)

OFF & return (ASC0!) (0-1,0)

Write/Read Requests

Most commands have a "& Return" option you can use by adding a "!" before the final parenthesis. This will

add a read command after the write command has been processed. For example, (PWR1!) would be equivalent

to entering (PWR1)(PWR?).

Blank Key return code (ok)

Status ? (BLK?) (0-1,n) n=0,1

ON (BLK1)

OFF (BLK0)

ON & return (BLK1!) (0-1,1)

OFF & return (BLK0!) (0-1,0)

Blank Screen return code (ok)

Status ? (BSS?) (0-6,n) n=0,3,4,5

Blue Screen (BSS0)

Black Screen (BSS3)

White Screen (BSS4)

Factory LOGO (BSS5)

User LOGO (BSS6)

Blue Screen & return (BSS0!) (0-6,0)

Black Screen & return (BSS3!) (0-6,3)

White Screen & return (BSS4!) (0-6,4)

Factory LOGO & return (BSS5!) (0-6,5)

User LOGO & return (BSS6!) (0-6,6)

Source return code (ok)

Status ? (SRC?) (0-22,n) n=0-22

Next Source (SRC+)

Previous Source (SRC-)

Computer1 (SRC0)

Computer2 (SRC1)

VIDEO (SRC11)

S-VIDEO (SRC12)

HDMI1 (SRC4)

LightCast (selected models) (SRC15)

Next Source & return (SRC+!) (0-22,n) n=0-22

Previous Source & return (0-22,n) n=0-22(SRC-!)

Computer1 & return (SRC0!) (0-22,0)

Computer2 & return (SRC1!) (0-22,1)

VIDEO & return (SRC11!) (0-22,11)

S-VIDEO & return (SRC12!) (0-22,12)

HDMI & return (SRC4!) (0-22,4)

LightCast & return (selected models) (SRC15!) (0-22,15)

Auto Image return code (ok)

exec (AIM1)

Keystone return code (ok)

Status ? (DKH?) (-40-40,nnn) n=-40 ~ 40

Keystone + (DKH+)

Keystone - (DKH-)

Set keystone (DKHnnn) n=-40 ~ 40

Keystone + & return (-40-40,nnn) n=-40 ~ 40(DKH+!)

Keystone - & return (-40-40,nnn) n=-40 ~ 40(DKH-!)

Set keystone & return (DKHnnn!) n=-40 ~ 40 (-40-40,nnn) n=-40 ~ 40

Especificaciones del producto

Marca:	InFocus
Categoría:	proyector
Modelo:	IN2124X
Color del producto:	Zwart
Energía promedio:	30 W
subwoofer de potencia media:	14 W
Canales de salida de audio:	2.1 kanalen
Altavoz de graves con controlador de diámetro (imperial):	5 "
Relación señal-ruido:	85 dB
Número de satélites:	2
Altavoces satélite de potencia media:	8 W
El diámetro impulsa el altavoz satélite:	3 "