Intellinet 561624 Manual de Usario

Lee a continuación 📖 el manual en español para Intellinet 561624 (16 páginas) en la categoría Cambiar. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
Important: Read before use. • Importante: Leer antes de usar.
intellinetnetwork.com
8-Port Gigabit Ethernet PoE+
Switch with PoE Passthrough
Instructions
Model 561624 (IPS-08G-95W)
2
The Intellinet 8-Port Gigabit Ethernet PoE+ Switch with PoE Passthrough offers
an array of time-saving, cost-effective features while providing superior network
throughput. No configuration is required and installation is plug and play.
For specifications, visit intelllinetnetwork.com/barcode/561624.
Features
• Supports up to 95 W power input from a PoE injector or switch ( )port 8
• Provides up to seven PoE network devices with power and data ( )ports 1 – 7
• Doubles the connection distance between PoE source and device from 100 m (328 ft.) to 200 m (656 ft.)
• Powered via PoE, DC power adapter or industrial power supply (not included)
• Two redundant DC inputs (48 – 57 V) with I/O terminal block
With a backplane speed of 16 Gbps, plenty of performance is available for your computers, servers
and other networking devices. Each of the ports automatically senses the link speed of the connected
network device and adjusts to 10, 100 or 1000 Mbps for compatibility and maximum performance.
This PoE switch is designed to provide compatible devices with enough power when needed.
It offers up to 30 watts of power per port until its power budget of 120 watts is reached.
DIP Switch — VLAN
OFF: default mode; allows normal communication between ports 1 – 8.
ON: isolates ports 1 – 7 from each other but allows them to connect to
port 8; increases the forwarding rate when broadcast storms occur.
Front Panel
LED Color Status Status Description
PWR Green On Power on
O Power o
10/100M/1000M Green
On Valid port connection
Blinking Sending or receiving data
O No link established
PoE Orange
On The connected device is receiving power
Blinking Abnormal power supply
O No powered device (PD) connected
English
Instructions 8-Port Gigabit Ethernet PoE+ Switch with PoE Passthrough
3
A) PoE Passthrough
B) Terminal Block Installation
NOTE: Ensure all power is off/disconnected before beginning!
1 Loosen appropriate screws.
2 Insert bare power-supply wires into appropriate terminal slots (positive
wire into positive slot; negative wire into negative slot).
3 Tighten appropriate screws to secure wires. (If desired, repeat steps 1 – 3 on second input pair.)
4 Install block into the device and tighten screws.
Desktop Installation
Prior to use, place/position the switch:
• on a level surface with at least 25 mm (approx. 1”) of clearance for ventilation
• away from sources of electrical noise: radios, transmitters, broadband amplifiers
within 100 m (approx. 328’) of network devices it’s to be connected to.
DIN-Rail Installation
1 With DIN-rail bracket attached to device with screws, angle bracket onto DIN rail.
2 Push device in till it clicks into place.
Power
1 2 3 4
Placement
1 2
Instructions
English
8-Port Gigabit Ethernet PoE+ Switch with PoE Passthrough
PSE (power sourcing equipment)
Power & Data (up to 95 W)
PD (powered device)
Power & Data
PD
PD
PDPDPD
PD
PD
PD
PoE Switch / Injector
PSE

Especificaciones del producto

Marca: Intellinet
Categoría: Cambiar
Modelo: 561624

¿Necesitas ayuda?

Si necesitas ayuda con Intellinet 561624 haz una pregunta a continuación y otros usuarios te responderán




Cambiar Intellinet Manuales

Cambiar Manuales

Últimos Cambiar Manuales