Intellytech LiteCloth Mega-6FC Manual de Usario

Intellytech Alivio LiteCloth Mega-6FC

Lee a continuación 📖 el manual en español para Intellytech LiteCloth Mega-6FC (10 páginas) en la categoría Alivio. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/10
,0_ _MEGA-6FC_MEGA-8FC eng
11
E) Attention
1. Please read this manual before using this product and follow the instructions
2. Should be used with the appropriate voltage labeled . Make sure the power on product button is set to off
before pressing the power button in-use. Please remove the power connection if the light is not . Don’t pull the
power cable directly. Please grip the power plug and pull it out from the socket.
3. Make sure your hand is dry when inserting and unplugging the power plug. Don’t touch the metal part
directly.
4. Keep the environment dry and ventilated when using the product. Do not leave or use the product in a
humid or dusty environment. And keep it away from fire . or extreme heat
5. Clean this product only a soft and dry cloth.with
6. extreme Do NOT apply pressure and drop the product.do not
7. Improper installation may damage the light, and there can be high voltage inside the unit. Please Do NOT
open or repair the unit yourself. If there is any defect, please contact Intellytech directly.
8. Only use the specific Li-ion camcorder batteries according to the model of the battery holder on the rear
panel. Do not install 24V batteries.
9. Please do not look at the LEDs directly or touch them. Please turn off the light if it is unattended.
10. Please make sure the product cools down and put it back in the case after being used. Don’t store the
product in a humid environment and avoid direct sunshine., Avoid freezing temperatures.
D) Temperature Notice:
Instruction Manual
LiteCloth 3.0
MEGA-8FC / 6FC
Storing your Mega-LC in a cold or location?
For optimal power distribution, allow your Mega-LC 3.0 to warm up for
5 minutes using the following settings:
1: Set the bi-color LED’s to 5600k
2: Set the output to 10%
*This isn’t required but will help in evenly distributing power through
the LED’s. We recommend this if the light is being stored in a cold grip
truck or if it has recently shipped.
Need Help? Contact us now using Live Chat at www.intellytechusa.com.
We usually respond within 10 seconds during business hours and can help with
any questions.
Email: customerservice@intellytechusa.com
Connecting Mega LED Mat to Frame
1: Unfold Folding Frame, and tighten silver to collar(s)
lock in place. (Make sure bar it is totally straight before
tightening silver collar).
2: Attach LED Mat to Frame by adding buckles and
straps.
3: Add CL-40L anywhere on center bar of the Folding
Frame.
Connecting LED Mat5" Softbox to
1: Unfold Softbox, and lin up Velcro between the LED e
Mat and Softbox.
** User Tip: Lean light and frame vertically against a wall
and then add softbox.
**Softbox Straps: These are optional and not required.
Attach these to reduce sag on your softbox.
**Optional lightweight modifiers shown below
(Using these will reduce the weight by 2-3 pounds compared to
using the included 5" deep softbox)
Pancake Lantern W/ Skirt Pop-Up Diffuser

Especificaciones del producto

Marca: Intellytech
Categoría: Alivio
Modelo: LiteCloth Mega-6FC

¿Necesitas ayuda?

Si necesitas ayuda con Intellytech LiteCloth Mega-6FC haz una pregunta a continuación y otros usuarios te responderán




Alivio Intellytech Manuales

Alivio Manuales

Últimos Alivio Manuales